Recommended Trailer Hitch for 2019 Toyota RAV4 Hybrid

Question

Question:

What 2 inch tow hitch do you recommend for 2019 Toyota RAV 4 Hybrid?

asked by: Chris

0

Expert Reply:

The trailer hitch I highly recommend for your 2019 Toyota RAV4 is the Curt # C13416 because it is a bolt-on installation that will not require drilling into your vehicle's frame to install and Curt's long-standing reputation for making very high-quality hitches.

This is a Class III hitch with a 2 inch receiver, like you were wanting. The hitch has a black powder coat finish to protect it from corrosion and also has a 4,000 lb towing capacity and 600 lb tongue weight capacity. The Curt # C13416 is made in the USA and comes with a lifetime warranty, which speaks to its durability.

I have added a link to the installation instructions so you can see just how easy it is to install.

expert reply by: Kyle S

0

Henry

5/28/2020

Will this interfere with the "kick to open" sensor for the tailgate?

Reply

Chris R.

5/31/2020

It is possible that the Curt # C13416 will interfere with the liftgate sensor on your RAV4. This is really the case with any of the hitches available for this vehicle. Unfortunately it's a hard thing to say for certain either way before the hitch is mounted, because we have found that the exact location of the sensor can differ (even within the same vehicle model) and just a tiny bit one way or another is the difference from simply having to move your foot to either side of the receiver to activate the sensors or losing its function completely.

Reply

Chris

4/2/2020

You dont show the English 50mm tow ball fitted to the 2 inch square pick up is that in the kit.....Also can you supply the seven pin dedicated wiring kit for England. Thank you.

Reply

Chris R.

4/3/2020

The trailer hitch doesn't include a hitch ball or ball mount but we do have a few 50mm hitch balls available, which I have linked below. I also linked our full ball mount selection as well. As for the 7-Way itself - you'll want to source that locally because all of ours are made for US trailer wiring configurations. Once you have that in place you'll need to use a converter like # 118158 to separate the circuits for the trailer.

Helpful Links

Ball-Mount

dept-pg-Hitch_Ball-pc-50~mm_Diameter_Ball.aspx

Reply

Larry

2/11/2020

Do you sell a wiring harness for this hitch, install on a 2019 Toyota RAV 4 hybrid?

Reply

Jacob H.

2/12/2020

We sell two wiring harnesses for the 2019 Toyota RAV4. We offer the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56434 and the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118801. It's really going to depend on personal preference because they are going to install the same way. If it were my vehicle, I would go with the T-One. We have a video showing how each installs on our product pages.

Helpful Links

Custom-Fit-Vehicle-Wiring/Toyota/RAV4/2019/118801.html

Custom-Fit-Vehicle-Wiring/Toyota/RAV4/2019/C56434.html

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 7

For your 2024 Toyota RAV4, the best trailer hitch receiver that will fit is the following: - etrailer Trailer Hitch Receiver #e23ZR The #e23ZR is the best because it has completely concealed crosstube so only the receiver is showing, allowing your…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

The best trailer hitch receiver for carrying bikes that fits your 2021 Toyota RAV4 Limited Hybrid is the EcoHitch Hidden Trailer Hitch Receiver #EH97FR. The reason for that is because it has the best ground and bumper clearance for a bike rack…

view full answer...

Answer 11

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

view full answer...

Answer 12

Hello Vron. For a class 2 hitch for your 2024 Toyota RAV4 Hybrid I recommend the Curt Hitch #C66KR. This will be a very easy bolt-on install. We do have several installers not too far away from you. The link below will show you the full list of…

view full answer...

Recommended Trailer Hitch for 2019 Toyota RAV4 Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching