Will Kodiac 3,500lb Disc Brakes Fit To UFP 4200 Axle
Question:
Can I install a Kodiak 10inch 3500lb on a UFP 4200 axel. I know the rotor would have to be UFP 4200lb. Will the kodiak caliper and mounting plate fit?
asked by: Allen S
Helpful Expert Reply:
These axles only use one common bearing combination for the inner and outer bearings. For the inner bearing, a 4,400 pound axle normally uses # L68149 and for the outer bearing it's usually # LM67048 vs. the outer bearing of # L44649 for a 3,500lb axle. Definitely check your bearings size and measure the spindles where the bearings sit.
To make sure that the hub-and-rotor assembly you're looking at will work with your trailer spindle, you will have to either measure your spindle or get the part numbers from the existing bearings and seal. 4,000- 4,400 pound axles are much less common than 3,500 pound or 5,200 pound axles.
Along with the axle capacity, wheel diameter and wheel bolt pattern, knowing either this spindle measurement or the part numbers will help you select the correct hydraulic disc brake kit for your trailer.
If you cannot find part numbers for the bearings and seal, you can measure the spindle at the inner bearing surface (C), the outer bearing surface (D) and the seal contact surface (B). I attached a diagram to reference. Once you have these measurements, you can look up the part numbers of the bearings and seal that you need in order to select the right disc brake kit.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Search Results: spindle
- Q&A: Will K2HR35DS replace UFP DB-42
- Shop: Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Search Results: ufp cap
- Search Results: ufp
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Shop: Replacement Black Plastic Filler Cap for Dexter 7,500-lb Brake Actuators
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Replacement Disc Brake Kit for 3,500 lb Trailer Axle for Saltwater Use
- Q&A: Will the Kodiak Disc Brake Kit K2HR35DS Fit My Trailer
- Shop: 4" Carbon Fiber Digital Caliper
- Q&A: Replacement Brake Pads for 4,400 lb Nev-R-Adjust Dexter Axle Electric Brakes
- Article: How to Measure a Trailer Axle
- Video: Removing and Replacing Trailer Brake Shoes Review
- Q&A: How to Choose the Correct Brake Assembly for Trailer Axles
- Q&A: Replacement Trailer Brakes for Tandem 3,700 lb Axle Trailer
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Search Results: 25580
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: bearing buddy
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: etrailer Electric Trailer Brake Kit Installation
- Video: DeeMaxx Disc Brake Kit Review
- Search Results: l68149
- Article: Trailer Tire Sizing
- Shop: Brake Controller
on Accessories and Parts
