Will K2HR35DS replace UFP DB-42
Question:
Will K2HR35DS replace UFP DB-42
asked by: Mike
Expert Reply:
The Kodiak Disc Brake Kit - 10" Hub/Rotor # K2HR35DS may fit your UFP DB-42 kit as a replacement. I cannot confirm without the size and dimensions of the axle and spindle. If your spindle has an inner bearing diameter of 1.378 inches and outer bearing of 1.063 inches it will work
You will also need a set of seals for the new hubs. The seals that will fit this hub is # 58846.
If you decide to go with this set of hubs I recommend picking up # DBRKHW35EZ. This kit comes with new bearings, seals, caps, and lug nuts.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 3500 lbs
- Bearing L68149 and L44649
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Shop: Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Master Cylinder for Dexter Model 10 and 20 Actuators - Disc Brakes
- Shop: Replacement Trailer Hub Bearing - L44649
- Q&A: Replacement Disc Brake Kit for 3,500 lb Trailer Axle for Saltwater Use
- Q&A: Will Kodiac 3,500lb Disc Brakes Fit To UFP 4200 Axle
- Q&A: Will the Kodiak Disc Brake Kit K2HR35DS Fit My Trailer
- Search Results: ufp cap
- Search Results: ufp
- Shop: Tailgate
- Shop: Truck Bed Tailgate Assist
- Video: Review of Titan Brake Actuator - Replacement Master Cylinder for Disc Brakes - T4747100
- Q&A: How To Tighten Spindle Nut on EZ-Lube Spindle
- Q&A: Is Brass Metering Adapter Needed w/Replacement Master Cylinder for Model 10/20 Disc Brakes
- Q&A: What Adapter Fitting for Master Cylinder 4747100 and 3/16 Inch Brake Line?
- Q&A: Parts Needed to Add Disc Brakes or EOH Brakes to Tandem 3,500 lb Axles on Boat Trailer
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: Kodiak Trailer Brakes 18TA-BLKIT Review
- Search Results: brake line kits
- Search Results: electric~hydraulic brake actuator
- Search Results: dexter brake line kits
- Search Results: brake line
- Search Results: brake line kit
- Article: Most Popular Wheel Bearings
- Video: Kodiak Trailer Brakes - Disc Brakes - K2HR35DS Review
- Video: Redline Trailer Brakes 4-35 Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub