Bulldog Winch Universal Winch Mounting Plate for Truck

See what our Experts say about this Bulldog Winch Accessories and Parts

• Universal Bulldog Winch Mounting Plate For 2000 Ford F-150
  I do have an option for you but the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches part # BDW20291 is designed more for open flat deck trailers, it may work for you but will probably require some drilling. The Bulldog Winch Universal Winch Mounting Plate for Truck part # BDW20008 is a better option which has a standard winch mounting bolt pattern of 10" long x 4-1/2" center to center hole spacing. I recommend to compare the hole spacing on the plate to what your hitch...
  view full answer...
• Winch Mounting Plate for 2001 Toyota Tacoma
  I'll start off by addressing the installation, and a lot of this depends on your mechanical ability. I would say that as long as you're comfortable turning a wrench, the installation of a winch mount like the Bulldog Winch Mounting Plate # BDW20208 is not overly complicated and would be considered a DIY. With that being said, the Bulldog # BDW20208 is only compatible with select Jeep JK and JK Unlimited models between 2013-2016 and is designed to be mounted between the two front bumper...
  view full answer...
  
• Front Winch Mount Options for 2004 Toyota 4Runner
  I have a couple solutions that may work for you, since, like you pointed out, there are no custom fit front mount hitches, winch mounts or bumpers for your 2004 Toyota 4Runner. One option is to use the Bulldog Winch Universal Winch Mounting Plate, # BDW20008. You will need to find a sturdy location on your 4Runner and drill mounting holes to bolt the plate. You also have the option to weld it in place for a permanent installation. The # BDW20008 is designed to fit the a 10 x 4-1/2 mounting...
  view full answer...
• Adding a Winch to a 2019 Jeep Wrangler Rubicon with Base Plate Kit
  There is not a particular winch designated to work with the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 on your 2019 Rubicon JLU with factory steel bumper. That being said, a winch that mounts on the top side of your bumper is probably the safest route to go for compatibility. The Bulldog Winch Standard Series Off-Road Winch # BDW10042 will be a great option for that, if you do not already have winch mounting points on your bumper you will want to use the Bulldog Winch Universal...
  view full answer...
• Winch Mounting Tray For A 2022 Jeep Gladiator Rubicon And A 12 Ton Badlands Apex Winch
  The Bulldog Winch Mounting Plate # BDW20208 you reference will not fit your 2022 Jeep Gladiator Rubicon. The Bulldog Winch Mounting Plate # BDW20208 is only compatible with select Jeep JK and JK Unlimited models from 2013-2016. Instead, you'll want to use the Bulldog Winch Universal Winch Mounting Plate for Truck # BDW20008 which will work for your Gladiator, and will support winches 8k to 12.5k with a standard 10 x 4.5" bolt pattern. Currently, we do not have any winch trays that will...
  view full answer...
• Winch Plate For A 2022 Jeep Gladiator And A 12K Badlands Winch
  For your 2022 Jeep Gladiator, and your Badlands 12K winch, we have the Bulldog Winch Universal Winch Mounting Plate for Truck # BDW20008. This winch tray will support winches that are rated for 8-12.5K and utilize the standard 10 x 4.5" bolt pattern. To attach this to your bumper you can either weld it on or, drill and bolt it on a sturdy location.
  view full answer...
• How Would I Mount The Bulldog Winch Universal Winch Mounting Plate?
  To mount the Bulldog Winch Universal Winch Mounting Plate, # BDW20008, you will need to drill and bolt it to a sturdy location on your 1998 Chevrolet K2500, or weld it in place. The Universal Plate is designed to fit the 10 x 4-1/2 mount of many winches, but how it fits to your specific truck is up to you to determine. We unfortunately don't have a custom fit mount for your truck. We do have another option for you. If you want to install a Front Hitch Receiver that is a confirmed fit...
  view full answer...
• Can I Use the Bulldog Winch Universal Mounting Plate on a 2012 F250
  Yes. The Bulldog Winch Mounting Plate # BDW20008 is a universal winch mounting plate, so it can be used on a 2012 Ford F-250. You will need to drill and mount this plate to a sturdy location on the frame of the truck and you'll want to source the mounting hardware locally, since this plate does not come with any included.
  view full answer...
• Will Bulldog Winch Universal Winch Mount BDW20008 Fit OEM Bumper on 2014 Jeep Wrangler Unlimited
  The Bulldog Universal Winch Mounting Plate for Trucks # BDW20008 is a general-application item designed to be a good general fit on many vehicles. The nature of this item's universal design means that each vehicle installation may differ slightly but the winch mounting holes have the common 10 x 4-1/2-inch center-to-center hole spacing. You can compare that hole spacing to what is on your winch. If the mounting hole pattern differs you'll need to drill the plate; be sure that the complete...
  view full answer...
• Overall Dimensions of the Bulldog Winch Universal Winch Mounting Plate BDW20008
  The overall dimensions of the Bulldog Winch Universal Winch Mounting Plate part # BDW20008 is 36-1/4" long x 7-3/8" wide. It has the standard winch mounting bolt pattern of 10" long x 4-1/2" wide and it comes with a durable powered coated finish.
  view full answer...
  

Do you have a question about this Accessories and Part?