Replacement Disc Brake Kit for 3,500 lb Trailer Axle for Saltwater Use
Question:
Want to replace disc brakes. 5 lug ,14in wheel. Always used in saltwater. I also want to replace wheel bearings and grease seal as well as lug nuts. Do you have a kit such as that.
asked by: Bob B
Helpful Expert Reply:
Since we know your trailer has a 3,500 lb axle the correct kit you'd want is the Kodiak Disc Brake Kit # K2HR35DS that you referenced as this is the correct kit to fit your spindles as well as comes withe stainless steel and dacromet coated assemblies to prevent corrosion. The correct bearings you'll need to go along with this is part # L68149 and # L44649 and then for a seal you'll want the # RG06-050.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Will K2HR35DS replace UFP DB-42
- Q&A: Disc Trailer Brake Kit Recommendation for a 1997 EZ Loader Boat Trailer
- Q&A: Can Spacers Be Used to Align Disc Brake Caliper When Converting from Drum to Disc Brakes
- Q&A: Disc Brake Conversion On 5th Wheel With Tandem 4400 lb Axles
- Q&A: Replacement Disc Brake Kit for UFP Brake System on Trailer
- Q&A: Replacement Disc Brake Kit and Hubs For 2004 DHM 2 Axle Boat Trailer
- Search Results: ufp
- Search Results: ufp cap
- Search Results: k2hr35ds
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Video: Demco Electric Lockout Hydraulic Brake Actuator Installation
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM62VR
- Video: Kodiak Trailer Brakes - Disc Brakes - K2R35D Review
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator with Lockout - DX89FR
- Search Results: k2hr35d
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35-D Review
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-545-35-G-EZ-K
- Video: DeeMaxx Disc Brake Kit Review
- Search Results: kodiak disc brake kit