Is Weight Distribution System Needed for 2009 Jeep Liberty with 1 Inch Rear Sag with Trailer Loaded

Question

Question:

Hello, I have a 2009 Jeep liberty with tow package rated to tow 5000 lbs. My camper loaded weighs 4100lbs total. My truck at hitch lowers one inch when my camper is hooked up. Do I still need a weight distributing hitch?

asked by: Dlp

1

Helpful Expert Reply:

For your 2009 Jeep Liberty with tow package you do not need to use weight distribution but we would recommend it because your trailer is over half the weight of your tow vehicle. There are benefits like reducing sag and adding sway control so it is a great option if you choose to. Based on your trailer weight when you calculate the 10-15% tongue weight and then any cargo weight behind the rear axle of your Jeep, I recommend using the Fastway e2 # FA92-00-0800. This system will use hitch ball # A-6 for a 2-5/16 inch diameter or # A-90 for a 2 inch diameter ball. I've attached an article on weight distribution systems to assist.

If you don't want the weight distribution system but would like suspension enhancement for that 1 inch of sag to level you out I recommend the Firestone Coil-Rite Air Helper Springs - Rear Axle # F4170. These can be adjusted between 5 and 35 psi for ride preference of shock absorption and load leveling.

expert reply by: Jason S

1

Answer 1

Weight distribution with sway control will absolutely help with the sway issue that you are having. To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of…

view full answer...

Answer 2

The Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW #BLU36FR would be perfect for your Flagstaff E-Pro #15TB. With a tongue weight range of 200-600 lbs your trailer should fall nicely in the middle even when…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...