Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed for use with your 42" long SuperTruss or Cannon receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 48" to clear your bed-mounted camper.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Torque lift line of wiring harness extensions for use with the super truck hitch extenders. These are available in several different lengths. Just depending on how long that hitch extender that you're using is going to be. This is Torque's Lifts 36" extension that matches their 36" super stress. If you're going with the longer super truss, get the longer. If you're going with the shorter, get the shorter. Really a nice option to where you can plug it right into the back of your vehicle, bring your power down to where it's right here, readily available and accessible for you to get to. What we're going to do is take our, what looks like a trailer plug end, we're going to pass it through our bracket.
It's just flexible enough we can kind of bend that bracket so allow it to come through. Then here's what we want, that's our 7 pole connector. We're going to be bale to hook our trailer up right here. We've got the nice safety chain connections there an then also our wiring connection. Slide that in.
We're pass our screw through the face there and then just put our nuts on the back. Now, the hardware's not provided so you'll need some hardware to pass through there. You can see our bracket's kind of got the oblong holes to make it to where it'll fit a lot of different style harnesses. I'm going to put a flat washer on to give our nut a good surface to bite to when we tighten it down. Now we can go ahead and tighten those down as well. At that point, we're mounted on, got a nice secure connection point.
We can basically just plug this right into the back of our truck. You don't want this to be hanging down underneath our hitch where it might drag or something like that. That will complete today's look at the Torque Lift wiring harness extensions for the super truck hitch extender.
Average Customer Rating: 5.0 out of 5 stars (26 Customer Reviews)
Designed for use with your 42" long SuperTruss or Cannon receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 48" to clear your bed-mounted camper.Everything from ordering and receiving this was wonderful, I have ordered from e trailer on the past and they haven’t disappointed me yet..
Would have been 5 star if bolts had been included
No review yet since I have not seen the hitch; it was delivered to my brother's house in SC and I am in Alaska. But I am headed down that way over the weekend to install the hitch on my truck down there. If you really want a star rating though, I would give the service from etrailer a 5 star. Shipping was quicker than expected.
THE TORKLIFT WIRING HARNESS IS A TIME SAVER, I NO LONGER HAVE TO REACH OVER MY FENDER TO HOOK UP MY 5TH WHEEL CAMPER, I NOW CONNECT MY CAMPER WIRING HARNESS AT THE TAILGATE.
THE MAXXAIR II COVER WILL NOW ALLOW ME TO LEAVE MY VENT COVER OPEN AT ALL TIMES. BE ABLE TO GET AIR INTO OUR CAMPER EVEN WHILE I'M DRIVING IT. THE FRESHER AIR WILL ALLOW US TO SLEEP EASIER THAN TO GET INTO A HOT CAMPER AFTER A LONG DAY IN THE SUN.
The Torklift Wiring Harness Extention shipped quick and good condition. I plan to use it for a slide in truck camper. It will be used to extend the electrical from the camper to truck and give me another location to disconnect it from truck when the loaded hitch hauler is on. The truck does not have a isolator for the battery so I will use the manual disconnect and mount it in a easier to reach location.
Delivered in good shape fast turn around. Ordered Monday Delivered Wednesday on all 4 products. Unfortunately 2 of the heavy boxes were damaged. Parts missing on 1 item.
Just the right length no messing around with any wiring or anything else.
Just what I needed for a trailer with short plug
Works perfectly. Thank you.
Assembled very well
Quality product and great service, quick delivery
WORKED AS DESCRIBED, FAST SHIPPING
Excellent Service
Worked out great
Exactly what I needed.
Top quality!!!
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Arden M.
4/16/2015
Best buy ever. Now I have a safe reasonable connection, without stretching