Will TorkLift Cannon Hitch Extension TLE1648 Fit 2014 Ford F-350 W/ Option 3" Trailer Hitch Receiver

Question

Question:

I have a 2014 F350 with option factory 3 inch hitch, with this fit in that before I purchase? I see this saids for 2017+ but curious if it fits pre 2017 with 3 inch hitch.

asked by: Kyle D

0

Expert Reply:

The TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long # TLE1648 will work just fine in the 3" trailer hitch receiver on your 2014 Ford F-350.

This extension was designed for the 2017+ Ford trucks, but works in any truck that has a 3" receiver so you will not have any issues.

While using the # TLE1648 your tongue weight will be limited to 300lbs or 600lbs if using a weight distribution hitch, and the trailer weight will be limited to 3000lbs or 6000lbs if using a weight distribution hitch.

I included a video of the # TLE1648 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Thank you for your recent purchase of the Titan 2-1/2-Inch Hitch Box Extension #RP45292 and the Blue Ox 2-1/2-Inch Hitch Receiver Immobilizer #BX88225. These two items are compatible with each other. For a trailer wiring extension if you need a…

view full answer...

Answer 2

Thanks for the pictures! My main concern in recommending a shorter extension, like the 36" TorkLift SuperTruss item #TLE1536, is clearance when making turns. The 36" would clear your camper and allow you to install your tow bar…

view full answer...

Answer 3

You can use a hitch extension but it will reduce your trailer hitch tongue weight capacity by 50 percent. We don't have a 2 inch hitch extension compatible, so I recommend a 2-1/2 inch hitch for your truck and get the Titan Hitch Box Extension…

view full answer...

Answer 4

Thanks so much for the detailed information, and we do have the correct front camper tie-downs for your 2020 Ford F-350 crew cab with a 6-3/4 foot bed, cab-length running boards and TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLF1008-30. I…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will TorkLift Cannon Hitch Extension TLE1648 Fit 2014 Ford F-350 W/ Option 3" Trailer Hitch Receiver

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching