Recommendation For Replacement Lock For SportRack AERO XL Roof Cargo Box

Question

Question:

Do you have replacement lock for a SportRack AERO XL roof cargo box?

asked by: Zee

0

Expert Reply:

I did some research and Unfortunately there is no replacement lock available for you SportRack Aero XL cargo box.

If you are interested in fashioning a replacement option then you could use a silicone caulk like Item # LT37467 to seal up your lock holes and then drill new holes for a new lock. You could install a simple single-hinged Master lock like Item # 720DPF and then use a padlock like Item # 131D to keep it secure.

I have attached a video for you to check out.

Contact us if you have any other questions.

expert reply by: Brint H

0

Answer 1

The Thule One-Key System #TH450600 are going to be the only lock parts available for your Thule Atlantis 1600 cargo box. The only other parts available for box are as follows. Replacement Slide Strip #TH05401 Replacement Quick Grip Mount Assembly…

view full answer...

Answer 2

In addition to the Thule One-Key System Lock Cylinders #TH450400, for your Thule Atlantis 1600 XT - Premium Roof Rack Cargo Box #TH686XT, you will also need the Replacement Lid Lifter Hanger #TH14936.

view full answer...

Answer 3

If the lock core is removed then all you would need to do is install a new one. In order to receive a lock core that works with the key you have now then you would need to search on our site for THLOCKN###with the ###being the code on your key. For…

view full answer...

Answer 4

We have just what you need. If you need additional keys then you can order part #THKEYN098. It sounds like you need to also replace the lock cylinder. If you still have your keys with N098 on them then you can just replace the lock cylinder with part…

view full answer...

Answer 5

Since you mention you do not have the hook type lock like #SR03807 then this is likely to be the part you need. According to my contact at Thule, who made the SV cargo boxes for Sears, the complete replacement lock assembly like yours is not…

view full answer...

Answer 6

Thule lock cores will typically have a number stamped on the face of the core of the lock; the #THKEYN083 key corresponds to locks with the "N083" or "083" on the lock face and this would be how you can determine the correct…

view full answer...

Answer 7

For your replacement lock, I recommend the Universal Change Key for Thule Locks #853-1251. This will allow you to remove any unlocked Thule lock cylinders and will be used to insert a new Thule lock cylinder. I've attached a video to assist. If…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Don't worry Dave, we have everything you need. The Malone LowBed MicroSport Trailer #MPG464-LB will allow you to carry boats up to 20' long and can support up to 500lbs on the crossbars. So with the Bunk Kit #MPG561 and 2 Bike Racks #MPG2100…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...