Replacement Locks And Lid Lifter For A Thule Atlantis 1600

Question

Question:

Need replacement parts for locking / hinge combo. Complete assembly! Not just key and cylinder Left and right side. Note this has nothing to do with strut. Can you email diagram please.

asked by: Joseph C

0

Expert Reply:

In addition to the Thule One-Key System Lock Cylinders # TH450400, for your Thule Atlantis 1600 XT - Premium Roof Rack Cargo Box # TH686XT, you will also need the Replacement Lid Lifter Hanger # TH14936.

expert reply by: Bryce D

0

Answer 1

Sounds like you are looking for a replacement lid lifter hinge for your Thule Atlantis 1600XT. For that you'd want the part #TH14936.

view full answer...

Answer 2

The Thule One-Key System #TH450600 are going to be the only lock parts available for your Thule Atlantis 1600 cargo box. The only other parts available for box are as follows. Replacement Slide Strip #TH05401 Replacement Quick Grip Mount Assembly…

view full answer...

Answer 3

The only way to remove a Thule lock cylinder like the ones in #TH450400 is by inserting the master key into a cylinder in the unlocked position. However, I have a few tips and tricks to help you remove the broken key to allow for the master key to be…

view full answer...

Answer 4

Thule lock cores will typically have a number stamped on the face of the core of the lock; the #THKEYN083 key corresponds to locks with the "N083" or "083" on the lock face and this would be how you can determine the correct…

view full answer...

Answer 5

For your replacement lock, I recommend the Universal Change Key for Thule Locks #853-1251. This will allow you to remove any unlocked Thule lock cylinders and will be used to insert a new Thule lock cylinder. I've attached a video to assist. If…

view full answer...

Answer 6

We have just what you need. If you need additional keys then you can order part #THKEYN098. It sounds like you need to also replace the lock cylinder. If you still have your keys with N098 on them then you can just replace the lock cylinder with part…

view full answer...

Answer 7

I did some research and Unfortunately there is no replacement lock available for you SportRack Aero XL cargo box. If you are interested in fashioning a replacement option then you could use a silicone caulk like Item #LT37467 to seal up your lock…

view full answer...

Answer 8

I don't have a whole lot of information for you but I spoke with Thule and they informed me that the lock core will need to come out first (with change key part #853-1251) and then the lock shield part #05771 can be removed. The lock shield…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Don't worry Dave, we have everything you need. The Malone LowBed MicroSport Trailer #MPG464-LB will allow you to carry boats up to 20' long and can support up to 500lbs on the crossbars. So with the Bunk Kit #MPG561 and 2 Bike Racks #MPG2100…

view full answer...