Dimensions for Equalizer in the Dexter E-Z Flex Heavy Duty Rubber Suspension System # K71-653-00
Question:
So I see the bottom is 7-3/4 in, center to center and then what is the height to the top hole. Also what is the hole-to-hole dim. from bottom, 7-3/4in up to the top center hole?
asked by: Dave K
Expert Reply:
I have an attached photo which illustrates the dimensions of the E-Z Flex Heavy Duty Rubber Suspension System, part # K71-653-00 you inquired about. As you can see on the photo, the distance from the outer mounting hole on the arm of the equalizer to the top mounting hole in the center is 4-3/4 inches. The dimension between the centerline of the bottom mounting holes and the centerline of the top mounting hole is approximately 2-7/8 inches. And as you are aware, the distance between the two bottom mounting holes is 7-3/4.
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Video: Dexter E-Z Flex Suspension Kit Review and Installation
- Shop: Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K
- Shop: Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
- Shop: DeeMaxx Semi-Metallic Brake Pads with Steel Backing Plates - 3,500 lbs to 6,000 lbs
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Review of MORryde Trailer Leaf Spring Suspension - Rubber Equalizers - MR34AR
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-653-00 Review
- Search Results: steps for trailers
- Q&A: Installing a MORryde MR27ZR on a 2020 Grand Design With Oddly Shaped Hangers
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Search Results: leaf springs
- Search Results: leaf spring equalizer
- Q&A: Upgrade for Dexter Curved Equalizer 13-142
- Q&A: How to Determine the Right Replacement Equalizer for a Horse Trailer
- Video: Review of Lippert Trailer Leaf Spring Suspension - Axle Mounting Hardware - LC52SV
- Search Results: equalizer
- Q&A: Determining Which MORryde CRE 3000 Equalizers and Wet Bolt Kit Fit 2020 Grand Design Reflection
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: leaf spring suspension
- Search Results: dexter axles
- Q&A: Shackle Strap Length of Dexter E-Z Flex Suspension System
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Equalizers - K13-142-02
- Search Results: dexter ez flex kit
- Q&A: How To Measure The MORryde Suspension Upgrade Kit
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Manufacturer Demo
- Video: Lippert Equa-Flex Cushioned Equalizers Review and Installation