Trailer Wiring Recommendation for 2006 Nissan Xterra without Trailer Connector

Question

Question:

hello, i have a 2006 nissan exterra, and need wiring for towing. how do i know if my exterra comes with factory tow package or without? thank you.

asked by: Dennis

0

Expert Reply:

One way would be to check the original window sticker for the vehicle for the tow package being listed. Other way would be to take the VIN to a Nissan dealer and have them run it to find out. If you do not have any factory trailer wiring currently though it's a very high probability that you don't have it and need the part # C56225 for a 4-way.

expert reply by: Jameson C

0

Answer 1

Since you will have trailer brakes and a battery, you will need at least a 6-Way connector, but I suggest going ahead and using a 7-Way as they are more universal. You will also need a brake controller to manage the electric trailer brakes. I will…

view full answer...

Answer 2

Your local mechanic is more than likely correct. Newer vehicles have sensitive components and thinner wires than ever before and adding trailer wiring that is powered by the vehicle wiring can overload the wires or sensitive circuitry and cause any…

view full answer...

Answer 3

Since your 2008 Nissan Xterra does not have the factory tow package, you will need to use the Curt T-Connector wiring #C56225 that you have referenced. This kit comes with everything you will need to make the 4-Way functional including the wiring…

view full answer...

Answer 4

If you just installed a new Curt T-Connector #C56225 on your Nissan Xterra but you are still having issues with the lights on your trailer, then the issue is most likely on your trailer side. You can verify this by checking the 4-Way functions with a…

view full answer...

Answer 5

At this time we do not have the relays and wiring connector sold separately for the Curt T-Connector Vehicle Wiring Harness #C56225. This part is required for the 4-way flat trailer connector to function if your 2007 Nissan Xterra came from the…

view full answer...

Answer 6

The #43605 wiring harness would be the only necessary part you would need to equip the 2006 Nissan Xterra with a 4-way plug, as this harness is made specifically for your vehicle and features a powered converter. A standard converter is used when a…

view full answer...

Answer 7

I recommend the Curt Trailer Hitch #13514. The class III hitch has a 2-inch receiver, 4000-pound towing and 400-pound tongue weight capacity and bolts onto your Xterra's frame with no welding required. You will also need a wiring harness. Which…

view full answer...

Answer 8

If you install the Curt 7-way part #C56226 on your 2007 Nissan Xterra you can install a Curt brake controller with the correct install harness part #C51382 for your vehicle. This will allow you to install a Curt Triflex part #C24VV. It would be a…

view full answer...

Answer 9

For a 2006 Nissan Xterra you can use wiring harness #C56225 that you have referenced. This is the correct harness for an Xterra that did NOT come with a factory 4-Way or 7-Way trailer connector. I have included a link to a video showing a typical…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

For your 2007 Nissan Xterra, I recommend the Curt T-Connector Vehicle Wiring Harness, #C56225, that you have referenced. This harness includes the relays that can be found in the factory tow package wiring, and it is wired similarly as the factory…

view full answer...

Answer 12

Since you don't currently have a 4-way trailer connector on your 2011 Nissan Xterra Pro 4 X you can use the Curt T-Connector #C56225 wiring harness. It includes all of the jumpers and relays you'll need to activate the tow package. I've…

view full answer...