RV Replacement Vinyl Window Trim Strip

Question

Question:

I need some replacement rubber window trim that slides into the aluminum and goes up against the glass. I can send a picture of the profile with a tape measure next to it. Thank you

asked by: Brian P

0

Expert Reply:

We do offer vinyl RV trim inserts in several colors and sizes. This material is either 1-inch or 3/4-inch wide, and is offered in colors like white # CAM25103, black # CAM25272 and beige # CAM25252. All such products are shown on the page I linked for you.

expert reply by: Adam R

0

Answer 1

We do carry the Domar stabilizer jack #TJ01RT which has a capacity of 650 pounds. I have attached a couple videos too.

view full answer...

Answer 2

I wasn't able to find any model information on your Sunlink RSBF3NN-008 and we don't carry that particular brand, but we do have a number of recessed puck lights available that may work for you. You may be able to use the Gustafson RV Puck…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

Depending on the window style and size. I would suggest either the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 1/2" Tall #SR43FR or the Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 3/4" Tall…

view full answer...

Answer 5

Hey Josue, so I can't for sure identify what pin box you have on your camper but it does look like the standard Lippert 1621 that the Gen-Y part #GY58GR is designed to fit. If your current pin box is 12 inches wide and the distance between the…

view full answer...

Answer 6

I reached out to SuperSprings International and they told me that you should be able to use the SumoSprings Rebel Custom Helper Springs #SSR-128-47-2 on your 2022 Ford F-350 Cab and Chassis. These helper springs will help keep you level when towing…

view full answer...

Answer 7

The Roadmaster Rear Sway Bar part #RM-1139-147 that fits your 2017 Ford E-450 Class A motorhome does require drilling to install. New holes must be drilled in the frame to mount the Roadmaster end links. If you check out the attached install…

view full answer...

Answer 8

Atwood is no longer in business so those camper jacks are no longer something available for purchase. While I realize that's not what you wanted to hear, there are options for replacements that I wanted to mention so you have that option: -…

view full answer...

Answer 9

Since the foam you have now is 1-1/4 inch wide the correct replacement is the #3691631 you referenced. This is 5/8 inch thick which would be the correct thickness based on what yours is now after years of shrinking and compression.

view full answer...

Answer 10

The only way to determine what your pin box's bolt pattern is would be to either get the serial number/RPO number off the tag on the pin box or to use the attached guide below to measure the bolts and crossover those measurements on the included…

view full answer...

Answer 11

The Furrion Chill Replacement RV Air Conditioner for Dometic Brisk Setup - 15,000 Btu #FR42PV rooftop unit is fixed on the RV roof using 4 long bolts through the mounting frame from the interior of the RV ceiling. So you will need to be able to…

view full answer...

Answer 12

You should be just fine replacing your two roof vents with the Fan-Tastic Vent Roof Vent #FV803350 since these fit the standard 14-1/4 x 14-1/4-inch RV roof opening size. Since you are replacing two 12V powered vents with two similar units your…

view full answer...