Recommended Trailer Hitch for 2018 Honda Odyssey with Hands-Free Liftgate Feature

Question

Question:

are there any hitches that will not interfere with the hands free lift gate for a 2018 Odyssey. I am looking to get a hitch and bike attachment but dont want to lose the ability to swipe my foot under bumper to open the hatch. Thank you.

asked by: David C

0

Expert Reply:

For your 2018 Honda Odyssey, I recommend the etrailer Trailer Hitch Receiver # e98855. This Class III trailer hitch is confirmed to fit your vehicle and will provide a 2-inch receiver opening that will work great for hitch-mounted accessories such as bike racks.

After installing the trailer hitch, you will still be able to operate the Hands-Free Liftgate feature on your Odyssey. You will simply need to move your foot away from the center of where the hitch receiver opening is located to activate the sensors. Moving your foot to either side of the hitch receiver will activate the Liftgate without issue. We have confirmed this with Draw-Tite. I have included the installation details for you to check out.

If you do not yet have a bike rack, I recommend looking at the Yakima RidgeBack # Y02458. This is a great hanging-style rack that will transport up to 4 bikes with a total weight of 150 pounds. It features a control lever that lets you to tilt the rack forward for easy rear cargo access and also fold down for storage when not in use. A hitch lock is included to secure the rack to your vehicle and I recommend adding the Cable Lock # Y02466 to secure the bikes to the rack.

I have attached a video demonstration on this carrier for you to check out along with a link that will take you to our available selection of hitch-mounted bike racks.

expert reply by: Chris R

0

Answer 1

Both the etrailer Trailer Hitch Receiver #e98855 and the Curt Trailer Hitch #C13370 referenced in your question are Class III hitches that are confirmed to fit your 2018 Honda Odyssey. These will both install at the same location on your…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...