Folding Aluminum Cargo Carrier that Measures 24 by 60 Inches

Question

Question:

Do you have an aluminum 24inch X 60inch carrier that is foldable?

asked by: David B

0

Expert Reply:

The only folding aluminum cargo carrier we have is the Curt # C18100 which measures 19 by 60 inches.

We do have a folding cargo carrier that is 24 by 60 inches. The Curt # C18151 however, it's steel not aluminum.

expert reply by: Charles S

0

Bob F.

1/26/2020

Is a 16 x 24 foldable aluminum rack not sturdy, strong, stable enough and is that why only the steel one is available?C18153 is one I found. How does that differ from the 18151?

Reply

Jacob H.

1/28/2020

The Curt Aluminum Cargo Carrier # C18100 is a 19" x 60" cargo carrier that will come in at just under 30 lbs in total weight and have 2 15/16" side walls. Both the # C18153 and # C18151 are going to be a steel construction and weight closer to 70 lbs. All three carriers are going to have 500 lb weight capacity and fit into 2" hitch receivers. The disadvantages that the aluminum carrier has are the total size is going to be a bit smaller and the side walls are going to be about half the height.

Helpful Links

Hitch-Cargo-Carrier/Curt/C18100.html

Hitch-Cargo-Carrier/Curt/C18151.html

Hitch-Cargo-Carrier/Curt/C18153.html

Reply

Answer 1

You need the T-One Vehicle Wiring Harness #TK58VR that includes the additional relay harness since your 2022 Nissan Pathfinder did not come with the factory tow package installed. This harness and relay we do not carry as a separate item.

view full answer...

Answer 2

In order to add a 7-way trailer connector to a 2022 Nissan Pathfinder you'll need to start with the T-One Vehicle Wiring Harness, part #TK58VR if you don't have the factory tow package or part #TK76VR if you do have the factory tow…

view full answer...

Answer 3

The Surco 24 by 60 Cargo Carrier, part #52018 has a straight shank, which means that the height at the back end would be the same at the height of the receiver. For the Toyota Venza, once a hitch is installed, the top of the receiver would fall…

view full answer...

Answer 4

Some cargo carriers have a rise built into them to add some ground clearance. The Tow Ready 24x60 Cargo Carrier, part #63153 has a 2-1/2 inch rise built into it. The carrier will extend about 39.25 inches out from your vehicle. Anytime you add an…

view full answer...

Answer 5

The RotopaX RX-4G 4-gallon fuel container can be mounted to a Rhino-Rack Pioneer platform rack like #JA8548 using adapter kit #RR43203. This kit uses the rack's specialized channels as the mounting point. This kit would not work with a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...