Correct Tekonsha T-One Wiring Harness Needed For 2022 Nissan Pathfinder Without Factory Tow Package

Question

Question:

Hi I installed the 4 flat wiring on my 2022 Pathfinder. I plugged it into the Factory outlet as instructed nothing lights up. Do I need to add a fuse or something? Thanks

asked by: Orin L

0

Expert Reply:

You need the T-One Vehicle Wiring Harness # TK58VR that includes the additional relay harness since your 2022 Nissan Pathfinder did not come with the factory tow package installed. This harness and relay we do not carry as a separate item.

expert reply by: Bud M

0

Answer 1

Yes, it does. The Curt Hitch item #C46DR is custom fit and bolts to the 2023 Nissan Pathfinder with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper cover. This not only looks better but it also helps…

view full answer...

Answer 2

We have exactly what you need as the correct trailer hitch for the 2023 Nissan Pathfinder is the Curt Trailer Hitch Receiver #C46DR.

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT67GR is currently the only receiver I see that is a confirmed to fit your 2022 Nissan Pathfinder. This will require you to trim a section of your rear fascia for the receiver. I do not see that…

view full answer...

Answer 4

For your 2022 Nissan Pathfinder SL I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT67GR. This is a custom-fit Class IV hitch with a 2" receiver. It has a max gross trailer weight of 6,000 lbs, tongue weight of 900 lbs which…

view full answer...

Answer 5

Yes, we do have the Curt Trailer Hitch Receiver #C46DR which is made in the USA for your 2022 Nissan Pathfinder. Do note that while the receiver is made in the USA some of the mounting hardware may be imported. The T-One Vehicle Wiring Harness…

view full answer...

Answer 6

For your 2022 Nissan Pathfinder I recommend the Curt Trailer Hitch Receiver #C46DR. This Class 3 hitch has a 2" receiver and maximum tongue weight of 900 lbs which will be more than enough for your Hollywood Racks Sport Rider SE2 Bike Rack…

view full answer...

Answer 7

Yes, we do have a trailer hitch for your 2022 Nissan Pathfinder. We have the Curt Trailer Hitch Receiver #C46DR. This hitch has a gross towing capacity of 6,000-lbs, and a maximum tongue weight of 900-lbs. You should consult your vehicles owner…

view full answer...

Answer 8

Whether you'll need to modify the bumper fascia or not will depend on which hitch you choose. The nice thing about the Curt Class III you mentioned, part #C13126 is that the entire hitch with the exception of the receiver opening is concealed…

view full answer...

Answer 9

I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver…

view full answer...

Answer 10

Sometimes you have to dig pretty far to find the connector behind the right kick panel of your 2022 Nissan Frontier to be able to install the Curt kit part #C56225 that you referenced. The connector has to be there though so I would recommend looking…

view full answer...

Answer 11

After getting the Draw-Tite #DT67GR installed on your 2022 Nissan Pathfinder, we do have a couple options that will definitely give you a good clean look. I do have to mention that none of these will completely fill the area the hitch will sit, but…

view full answer...

Answer 12

I have two hitch receivers that are compatible with your 2022 GMC Acadia. The first hitch receiver is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C13293. This is a Class III hitch receiver, meaning that it is a 2"…

view full answer...

Correct Tekonsha T-One Wiring Harness Needed For 2022 Nissan Pathfinder Without Factory Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching