Do Hitches for 2017 Chrysler Pacifica Allow Hands Free Rear Liftgate to Function

Question

Question:

Are your hitches compatible with 2017 Pacifica hands free rear lift gate where you wave your foot to open? I know the Oem hitch has 2 sensors mounted so a single center sensor is not obstructed. Thanks

asked by: Wendell C

0

Expert Reply:

For your 2017 Chrysler Pacifica the etrailer Hitch part # e98903 is a confirmed fit and would still allow you to use your hands free liftgate. At the very worst you might have to run your foot to either side of the hitch opening but it will still work just fine.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…

view full answer...

Answer 6

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 9

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 10

There is indeed a 4-way trailer wiring harness for your 2024 Chrysler Pacifica, made by Curt. The correct part number is the following: - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C47VV

view full answer...

Answer 11

The etrailer Trailer Hitch Receiver #e98903 is rated for 400 lbs tongue weight and 4,000 lbs towing, but that looks to be more than what your 2018 Chrysler Pacifica is rated for. When I looked up the online manual for your vehicle it looks like your…

view full answer...