Backing Plate Recommendation for E-Track for Securing Track to Wood Floor Trailer
Question:
I am getting a 16foot utility trailer, with 2 x 6 floor, in a couple of weeks. I have a JD sub compact tractor that weighs approx. 2500 lbs. Will e track work for this application? If so, I would like put a row down each side. What would be the best way to install 8foot lengths? Thanks
asked by: Bill
Helpful Expert Reply:
The E-Track like part # E19148 that you referenced has a capacity of 2,000 lbs so it would do well securing a 2,500 lb trailer at 4 points as each track would have 1/2 the weight. I would recommend you use backing plates below the floor of your trailer like part # e96RR since your tractor is pretty heavy and the floor of your trailer is wood.
For D-Rings to install in the track you would want the part # E59143 so that you could use a ratchet strap like the # EM01314.
Products Referenced in This Question
Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs
- E-Track
- E-Track Anchor
- 1200 lbs
- Erickson
more information >
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Erickson Ratchet Tie-Down Strap w/ Double J-Hooks and D-Ring - 1" x 15' - 1,000 lbs
- Ratchet Straps
- Trailer
- Truck Bed
- D-Ring
- Double-J Hooks
- 1 Strap
- Manual
- 11 - 20 Feet Long
- 0 - 1 Inch Wide
- 851 - 1200 lbs
- Erickson
more information >
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Q&A: What Thickness Of Plywood Should Be Used For The E-Track Trailer Cargo Control, # E19148,
- Q&A: Vertical Etrack Mounting on a Thin Stud Recommendations
- Q&A: Installation Of E-TRack System In Trailer With Steel Cross Beams And 3/4 Inch Plywood
- Q&A: Recommendations for Anchoring E-Track to a Ply-Wood Trailer Floor
- Q&A: Mounting Erickson E-Tracks to 3/8 Inch Plywood or Vinyl Covered Walls
- Q&A: Installation Recommendations For E-Track Horizontal Track System In Trailer With 2x6 Floor
- Q&A: How Much Weight Can the E-Tracks Hold Attached To Plywood
- Article: How to Install E-Track in 3 Easy Steps
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: CargoSmart X Track Trailer Shelf Bundle - Matte Black - Steel - 667 lbs - 5' Long
- Shop: Lag Bolt Hardware for Snap-Loc E-Track Tie-Down Anchors - Qty 4
- Shop: Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
- Shop: Snap-Loc E-Track Wood Screws - Qty 20
- Shop: Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1
- Search Results: x track
- Search Results: x track rail
- Search Results: e~track hardware
- Search Results: hardware
- Search Results: e~track
- Shop: Trailer Hitch
- Video: etrailer Horizontal E-Track Review
- Article: Cargo Tie-Down Methods
- Shop: Trailer Wiring
- Article: What To Look For When Buying Ratchet Straps
- Video: Interaction with E-Track
- Video: Review of etrailer E Track - E-Track Rails 4 Pack - e42VR
- Shop: Brake Controller
- Search Results: etrack
- Search Results: etrack