What Thickness Of Plywood Should Be Used For The E-Track Trailer Cargo Control, # E19148,
Question:
The 1/4 mounting holes are 2 apart. My metal studs are just 2 total. I could not get 2 screws from the mounting plate into a stud. If I cover the studs in plywood, what thickness is recommended to attach the track to.
asked by: Mike C
Expert Reply:
I would use 3/4 inch plywood to cover the studs and secure the plywood to the trailer frame studs in as many points as possible.
Then, use 1/2 inch wood screws to secure the E-Track Trailer Cargo Control, # E19148, to the plywood. I would use screws at least every other hole if not every hole, starting from the center and working to the ends to ensure the track lays flat.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Shop: Nerf Bars - Running Boards
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Carr Hide Away Step for Work Trucks - Side Mount - Grated Steel Platform - 24" Long - 500 lbs
- Shop: Replacement Redarc Tow-Pro Elite Control Knob Wiring Harness - 3' Long
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Can Storage Boxes be Mounted on Front of V-Nose Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can E-Track Installed as a Flush Mount
- Video: CargoSmart Spare Tire Holder Review
- Q&A: E-Track Spacing Recommendation for Securing a Harley To a Utility Trailer
- Q&A: Recommendations for Anchoring E-Track to a Ply-Wood Trailer Floor
- Q&A: How to Wire 12V Battery in Enclosed Trailer to Power Trailer Lights Independent of 7-Way Connection
- Q&A: Installation Recommendations For E-Track Horizontal Track System In Trailer With 2x6 Floor
- Search Results: etrack
- Search Results: e~track
- Search Results: hopkins engager
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Video: Review of M-3 and Associates Enclosed Trailer Parts - Ramp Door Spring - M394FR
- Video: etrailer Horizontal E-Track Review
- Search Results: leaf springs
- Search Results: dock wheels
- Shop: RV Camera