What Is The Length And Weight Capacity On The Roadmaster Cable Connectors, # RM-910022

Question

Question:

Hello, I was wondering the size length of part #RM-910022? Also, what is the rating for part #RM-910022 in pounds when will it break?

asked by: Rick

0

Expert Reply:

The length on the Roadmaster Replacement Cable Connectors, # RM-910022, is 3-3/16 inches and the width is 1-1/2 inches. The thickness of the connector is 3/8 inch.

The maximum capacity on the connector is 6,000 lbs. They are packaged in a quantity of two.

expert reply by: Jeff D

0

Answer 1

Extending out the safety chains is definitely something that has to be done with the Swagman Original 4 Bike Towing Rack #S64675. The RoadMaster 8" Safety Cable Extensions #RM-910648-8 will help get the job done but I do recommend picking up…

view full answer...

Answer 2

First, before flat towing your 2011 Mini Cooper, be sure the tires are filled to the recommended psi and in good condition. More importantly, be certain your steering column is not locked; if your tires are unable to turn they would wear out quickly.…

view full answer...

Answer 3

The parts you all mentioned would have enough capacity for the weight of your 9.9k toy hauler. The part #MB38 would work well for mounting the safety chains #49150 with the quick link #C82932. Now where the part #MB38 should install on your trailer…

view full answer...

Answer 4

I pulled the quick links and quick loop that you referenced as well as the safety chains, #2118-605-04, that you purchased and found that the best option for you will be the 3/8 Inch Quick Link, #6590-044-04. This quick link will fit through the…

view full answer...

Answer 5

That should work provided that in the process of shortening the chain to make 2 chains and when bending or flexing you do not stress the metal. If the metal is heated up or you see stress marks in the metal, fractures or discolored areas these are…

view full answer...

Answer 6

For quick links the working load limit (WLL) is the maximum working load a link can handle, so if your ATV weighs less than 1,200 lbs you will be fine to use the links you have. As an example, the 1/4" Quick Link for Safety Chains #750-3204 has…

view full answer...

Answer 7

I went out into our warehouse and grabbed a #750-3204 to measure the opening of it when fully threaded open and found that the opening measures .32 inches or 21/64 inches. This is pretty close to 5/16 of an inch, just slightly bigger. It would open…

view full answer...

Answer 8

With the quick link #C82932 closed the inside measures 3-5/16 inches by 3/4 inches at the nut or 7/8 inches away from the nut. This is shown in the video I have linked for you. I also made a picture showing the measurements.

view full answer...

Answer 9

We can offer you replacement S-hooks with keepers for your trailer's safety chains. You'll just need to find a suitable saw (or helper who can bend the S hook open) to remove the old ones. We have S-hooks in 7/16-inch size #C81820, 17/32-inch…

view full answer...

Answer 10

Hitch accessories tend to wobble, especially those that use a 1-1/4 inch to 2 inch adapter. The threaded hitch pin can only do so much to combat the movement. The issue is that the shank of the accessory has to be slightly smaller than the opening…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...