How Far Can the 1/4" Quick Link # 750-3204 Open

Question

Question:

What is the open gate dimensions? I have a 1/4inch diameter lag eye screw I want to pass through the opening. Thanks

asked by: Lawrence

0

Expert Reply:

I went out into our warehouse and grabbed a # 750-3204 to measure the opening of it when fully threaded open and found that the opening measures .32 inches or 21/64 inches. This is pretty close to 5/16 of an inch, just slightly bigger.

It would open far enough for a 1/4 inch diameter screw to fit through.

expert reply by: Jameson C

0

Answer 1

Extending out the safety chains is definitely something that has to be done with the Swagman Original 4 Bike Towing Rack #S64675. The RoadMaster 8" Safety Cable Extensions #RM-910648-8 will help get the job done but I do recommend picking…

view full answer...

Answer 2

You are not the first customer to have issues with the safety chain hooks on the OEM trailer hitch for your 2018 Ford truck. Using a quick link like the Curt #C82932 that you referenced might be a good option, as long as the gap on the link is large…

view full answer...

Answer 3

With the quick link #C82932 closed the inside measures 3-5/16 inches by 3/4 inches at the nut or 7/8 inches away from the nut. This is shown in the video I have linked for you. I also made a picture showing the measurements.

view full answer...

Answer 4

I pulled the quick links and quick loop that you referenced as well as the safety chains, #2118-605-04, that you purchased and found that the best option for you will be the 3/8 Inch Quick Link, #6590-044-04. This quick link will fit through the…

view full answer...

Answer 5

The parts you all mentioned would have enough capacity for the weight of your 9.9k toy hauler. The part #MB38 would work well for mounting the safety chains #49150 with the quick link #C82932. Now where the part #MB38 should install on your trailer…

view full answer...

Answer 6

That should work provided that in the process of shortening the chain to make 2 chains and when bending or flexing you do not stress the metal. If the metal is heated up or you see stress marks in the metal, fractures or discolored areas these are…

view full answer...

Answer 7

The length on the Roadmaster Replacement Cable Connectors, #RM-910022, is 3-3/16 inches and the width is 1-1/2 inches. The thickness of the connector is 3/8 inch. The maximum capacity on the connector is 6,000 lbs. They are packaged in a quantity of…

view full answer...

Answer 8

We can offer you replacement S-hooks with keepers for your trailer's safety chains. You'll just need to find a suitable saw (or helper who can bend the S hook open) to remove the old ones. We have S-hooks in 7/16-inch size #C81820, 17/32-inch…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

How Far Can the 1/4" Quick Link # 750-3204 Open

Product Page this Question was Asked From

Continue Researching