Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
Question:
Hello, I have a dump trailer with 2 6000 lbs dexter axles. I need to replace one of the springs and Im considering replacing all four. I contacted the manufacturer. They provided me with the following information: Nuera – 27-211 Replacement Spring Emco 1203T3 - This 2” wide 5 leaf slipper style spring is designed for 5,200 - 7,000 pound suspension systems. Number of Leafs: 5 Capacity: 3,500 Free Length: 26 7/8inch Spring Width: 2inch Free Arch: 3 3/16inch Bushing ID: 9/16inch Interchanges : 72-32 , UNA-232, SH-7232 I crossed this part spec with your site and it seems you have a part with similar specs. 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8inch Long SP - 232275. Id like to know if there are any specific reasons why I shouldnt upgrade to the more heavy duty 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8inch LongSP - 285275. The specs appear to be very close, with only a quarter inch difference in the measurement from the center eye to the bottom of the lowest leaf measurement B I appreciate any help you can give.
asked by: DeWane
Expert Reply:
If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will be very stiff and can cause a very rough ride on the trailer. For the best ride I recommend sticking with the recommended size # e74SR and I do recommend replacing all of the springs at the same time to avoid uneven wear.
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Video: etrailer Trailer Leaf Springs Review
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Dexter 5-Leaf Slipper Spring for 10,000-lb Trailer Axles - 30-1/2" Long
- Search Results: trailer suspension bushings
- Shop: Dexter Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Search Results: 4 pin round connector
- Search Results: 8~418
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Video: Titan Trailer Brakes T2385200 Review
- Search Results: 25580
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Q&A: Adding Brakes to a Mobile Home Axle
- Video: Aries AdvantEdge Headache Rack Review
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: equalizer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch
on Trailer Suspension Parts
