Which Dexter Hub or Hub and Drum Fits a Lippert 2,800 to 3,500 Pound Trailer Axle

Question

Question:

Hi, I have LCI35-SB-77.5-59.5-NOSP-US-G545-7213-30PT GAWR2800 axle. What Dexter hub will fit it?

asked by: Sergey

0

Expert Reply:

The LCI35 in the axle number indicates that it is a Lippert 3,500 pound axle but it could be derated to 2,800 pounds. I believe the G545 indicates hubs with a 5 on 4-1/2 bolt pattern.

So for hub and drum assemblies that fit those characteristics you can use assembly # 84546UC3 (or # 84546UC3-EZ if the spindles have grease fittings at the ends) which uses inner bearing L68149 and outer bearing L44649. For a regular hub you can use # 84545BX (or # 84545UC1-EZ if the spindles have grease fittings) which has the same bearings.

If you have a different bolt pattern or bearings let me know what they are and I can determine if we have a hub or assembly that fits.

expert reply by: Michael H

0

Answer 1

The bearings you would need are inner bearing #LM67048, outer bearing #L44649 with a #10-42 seal. We don't have this as a kit but you can order each individually.

view full answer...

Answer 2

We do have a solution for replacing your obsolete Dexter trailer axle but it isn't your standard trailer axle as none of ours matches that description. If you want to stick with a standard axle you need to contact a trusted trailer shop to have…

view full answer...

Answer 3

It's indeed very common nowadays that the trailer requires lifting in order to be level with the tow vehicle and have bedside clearance as tow vehicles are getting taller and taller. That said, it's pretty simple to do this with a lift kit…

view full answer...

Answer 4

The bearings you would need are inner bearing #LM67048, outer bearing #L44649 with a #10-42 seal. We don't have this as a kit but you can order each individually. We contacted Dexter and they informed us that you axle was made specifically for…

view full answer...

Answer 5

I have an axle that is pretty close to what you're wanting, but is not going to work as the spring center measurement is a bit off and it needs to be just right to work. I do have a solution though. You can get the Timbren Axle-less Trailer…

view full answer...

Answer 6

Your existing Lippert 3,500 pound axle has an 86-1/2" hub face length and a 68-1/2" spring center length. While I do have a great option for replacement, we don't offer any standard straight beam units that match these dimensions. If…

view full answer...

Answer 7

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...