2-15/16" Diameter Low-profile LED trailer light functions as a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with built-in flange. Weathertight connection accepts standard 2-prong plug. PC rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
This light has a weathertight connection as pictured above (AL42PB - sold separately). This type of connection is designed to help block out moisture.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 2: Today we're taking a look at the Optronics LED Trailer Clearance or Side Marker Light. This low-profile trailer tail light functions as a clearance or a side marker light for your trailer. It's a sonically sealed waterproof housing and lens unit that is submersible. It features surface-mount technology when it comes to the construction of the LED circuit board. It's designed to better withstand shock and vibration and allows for improved heat distribution.Now, it is a LED system. LEDs make great replacements for incandescent lights.
They last longer. They burn brighter. They're more efficient. With LEDs you don't have to worry about replacing bulbs or worry about brittle filaments. We're looking at a durable, polycarbonate lens and housing.
It has the surface mount installation with the built-in mounting flange. Three mount hole design. Mounting hardware not included.On the backside, it features a weathertight connection with the included two-wire pigtail plug. That fits into these little connection points and does a great job at keeping dirt, grime and moisture away from the connection terminals. And then you have a two-wire design, black wire for power, white wire with a ring terminal on it.
That's your ground wire. It is a PC rated unit. The overall dimensions starting with the overall diameter going edge to edge gives us a measurement of 2 15/16 of an inch. And then the thickness is 15/16 of an inch thick. That's from the front to the back of the housing, but again, it's a recess mount installation.
Got that built-in flange, and so really, the only portion that's visible is going to be that portion there, and as you can see that's a really nice low-profile design from the bottom of the lip to the outermost point of the lensing right there.The light face, just measuring that lens area, is about two inches. The diameter hole that this sit in is 2 3/16 to 2 1/4, right in that area. And then the distance you have between the mount holes on center is 2 1/4 inches.We're going to go and hook it up to power. That way you can see what it looks like with some power running to it. We'll also turn off our overhead lights so you can see it in a low light setting. You can see here that it sends out a nice bright consistent signal. This is a amber light so it's got the nice amber lens on there, and it features five LEDs or five diodes, so the multi-diode design really helps optimize the overall light output. Power draw at 12.8 volts is 0.063 amps. Optronics also puts a lifetime warranty on the LEDs.That's going to do it for today's look at the Optronics LED Trailer Clearance or Side Marker Light.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
2-15/16" Diameter Low-profile LED trailer light functions as a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with built-in flange. Weathertight connection accepts standard 2-prong plug. PC rated.Great products quick shipping.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.