Complete Towing Set-Up Needed for 2014 Nissan Xterra

Question

Question:

I would like to purchase a complete towing package for my 2014 Nissan Xterra. I have been looking at the Curt equipment I think that it will fit my needs. Can you recommend exactly what I will need a complete list of parts? Ex. the vehicle is pretty high off the ground I think I may need a bit of a on the ball mount? I also want to make sure that I get the correct electrical components and that I can do this myself. Any input/advice is appreciated. Thank you.

asked by: Domenic T

0

Expert Reply:

To get your 2014 Nissan Xterra set-up and ready to tow, you will need five components. I have included an article which covers this.

1) Trailer Hitch Receiver - The Curt Class III Trailer Hitch Receiver, # 13514, will provide you with 400 lbs of tongue weight capacity and 4,000 lbs for towing.

2) Ball Mount - To determine which ball mount is needed for your set-up, we just need to get a couple quick measurements. You'll want to measure the hitch height from the ground to the top of the receiver opening and then also measure from the bottom of the trailer coupler to the ground. The difference between the two is the rise or drop that is needed for your set-up. I have included a link to all of our ball mounts for you. Just use the filters on the page to narrow the results once you have your measurements.

3) Pin and Clip - # C21500 for standard pin and clip or # e98880 for receiver lock.

4) Trailer Hitch Ball - I have attached a link to these as well. Once you have picked a ball mount, check to see what shank diameter hitch ball it requires. You can then use the link to find the correct hitch ball.

5) Wiring Harness - The Curt T-Connector Vehicle Wiring Harness, # C56225, will provide you with a 4-way connector at the back of your Xterra. If you are looking for a 7-way connector you will need # C56226. Both wiring harnesses include the jumpers and relays needed to activate the tow package on your Xterra.

As for installation, the vast majority of our customers install the products themselves. With our awesome install videos, the tools required, a bit of patience, and an extra set of hands would be a bonus, I don't see you having any issues with installing everything yourself. Videos are attached!

expert reply by: Leah S

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

When looking at a Weight Distribution (WD) system you will want to choose one with a Tongue Weight (TW) range that the Total Tongue Weight (TTW) of your towing setup falls in the middle of. To find the TTW of your towing setup you will need to add…

view full answer...

Answer 3

The rating of aftermarket manufacturers could be lower than a factory option for a couple of reasons. This could be the size and design of the hitch to accommodate the frame of the vehicle, spare tire location, or factory mounting points. The Curt…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...