Trailer Wiring Harness Installation - 2014 Nissan Xterra C56226 Video

If your trailer does not have brakes your best and easiest route would be to use the adapter part #37185. Your 4-way plugs into it's 4-way and you have both a 4-way and 7-way with just taillight functions. If you need trailer brakes you'll…

Since you already have a relay harness installed from the #118525, you will be able to install the 7-way harness #118267 in place of the 4-way harness from #C56225. If you plan on using a trailer with electric brakes, you will need a brake controller…

Yes, per the installation instructions, your 2014 Nissan Pathfinder with the Controller Area Network, or CAN Bus system, it is recommended by the manufacturer that you use the 30-amp circuit breaker kit #331-CBK30-EB. This, along with your Redarc…

The Redarc Tow-Pro Liberty, part #RED24FR would be a plug and play installation on your 2017 Nissan Frontier if you used the #RED39FR wiring harness, as long as the vehicle is equipped with the factory installed tow pacakge. The #RED39FR harness…

Your 2009 Nissan Xterra does not require a converter for a trailer connector. It uses the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C56226 which plugs into the factory connectors in the rear of your…

You don't need to upgrade to a new kit. Looks like you purchased 7-Way #118267. It does not use different relays. It sounds like me the trailer connector is pinned out differently than the vehicle side connector. What is likely happening is the…

Other than the fact that each 7-way trailer connector you mentioned is from a different manufacturer, both the #C56226 from Curt and the #118266 from Tow Ready would work identically. Either connector would work just fine on your Xterra. You could…

It is not recommended to bypass the break-away battery and a very small current is normal. The 7-pin connector sounds like it is not connected correctly. It is not uncommon for the trailer brake controller pin at the 5 o'clock position to be…

The heaviest rated hitch we have available for your 2013 Nissan Pathfinder is the Curt #C13126. This Class III 2 inch is rated for 600lbs tongue weight and 4,000lbs towing capacity; if used in combination with a weight distribution system it will…

Since the solution for no running lights on your 2013 Nissan Xterra is a missing relay and you also want a 7-way kit your best solution would be the part #C56226. You already have some of the relays but you'll be able to use one of the extra blue…

If the relays and jumper harness used with the 4 pole like #C56226 (see linked install video) are already in place behind the passenger side kick panel, then the Tow Ready #118267 will work just fine. If your aftermarket 4-pole simply tee'd in at…

Your 2007 Nissan Frontier will have the tow package, as will all models, and the reason there are relays with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C56226 is that they will activate that tow…