Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
(269 reviews)
Price: $345.27
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
Item # e65GR
Our Price: $345.27
In Stock
In-stock alternatives that can ship today
- All Info
- Reviews (269)
- Q & A (0)
- Photos
etrailer Trailer Axles - e65GR
- 3500 lbs
- 89 Inch Long
- 74 Inch Long
- 5 on 4-1/2 Inch
- No Drop or Lift
- Leaf Spring Suspension
- Idler Hubs
- etrailer
- Easy Lube Spindles
Round trailer axle beam measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
- Low ride height makes it easier to load and unload your trailer
- Straight, Easy Grease spindles - no drop
- Patented welding process prevents spindle failure with 40% stronger welds
- Built-in grease zerk for simple lubrication
- Spring seats and spindles are welded on
- Cast iron idler hubs are sturdy and durable
- Pre-greased idler hubs with bearings, races, seals, and lug nuts - no need to pack bearings
- CSA, QAI, and SAE-N certified
- Lifetime technical support from the experts at etrailer.com
Specs:
- Weight capacity: 3,500 lbs
- Hub-face-to-hub-face length: 89"
- Spring-center-to-spring-center length: 74"
- Hub bolt pattern: 5 on 4-1/2"
- Grease cap flange diameter: 1.988"
- Wheel stud dimensions: 1/2" diameter x 1-5/16" long
- Axle diameter: 2-3/8"
- Wheel size: 13" to 15"
- Limited lifetime warranty
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
etrailer Axles
etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI Laboratories for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
BS35RUW89.00074.000 etrailer by AxleTek 3,500 lb Axle Beam - 89" Hub Face - 74" Spring Ctr
17-110 Idler Hub Assembly Compl Boxed - 3.5K - 5 on 4.5 - PG EZ
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
- Defective
Customer Reviews
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs - e65GR
Average Customer Rating: 4.7 out of 5 stars (269 Customer Reviews)
Round trailer axle beam measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.by: Michael 03/15/2024
Axle was exactly what I needed. Have pulled it dozens of 500+ mile trips in the last year and doing great.
by: Troy 05/31/2023
My axle and hub assemblies arrived ahead of the scheduled date and were just as described. Everything fit and worked just right.
by: Gary 10/30/2023
Every thing fit as expected and has provided good service.
by: Sean 11/05/2023
Everything still working great 1 yr lat er
by: Michael03/23/2023
Everything has been great ordering from etrailer. Shipping seems even faster than amazon.
by: Great so far02/18/2023
The axle shipped an hour after I ordered it and showed up two days later. All measurements were spot on and I had no issues installing it. As long as I don’t have any tire wear or hub issues in the future it has five stars, else I’ll change my review.
by: Ryan 07/22/2022
Product arrived on time and was exactly what I needed. It was shipped in 2 different shipments, so I was not quit sure when the other parts were to arrive. They came 1 day apart, not a bid deal.
Thank you
by: Gerald11/03/2022
I was impressed with the quick delivery and the overall quality of the produce, The product information made it easy to order, and Stacey's answers to my questions were very helpful.
by: David 12/13/2021
I had an excellent experience with etrailer. It was easy to order, delivery was fast and the product worked as needed. Great customer service and follow-up too!
by: Eric03/19/2022
Great replacement
by: Patrice08/14/2022
Thanks so much for my order, it arrived quickly...Thanks again
by: Jacob03/29/2024
by: Eddie 07/07/2022
CAMELLA MADE IT HAPPEN. FAST SHIPPING T OO
by: Michael 07/26/2023
by: Timothy 05/31/2023
by: Jerry12/21/2023
by: Kent 06/16/2023
by: Stephen 10/05/2022
by: Mark 09/19/2022
by: Alex 09/26/2022
by: Luis 02/27/2024
by: John E02/18/2024
by: Mike08/12/2022
by: Chris 04/04/2023
by: Bennett 02/10/2024
25
268
Show More Reviews
See what our Experts say about this etrailer Trailer Axles
- Does etrailer Still Sell Trailer AxlesHey Jason, thanks for reaching out! We definitely do still carry trailer axles! I'm linking our selection for you to filter through but if you can give me some details about what you're needing (weight rating, hub-face, and spring-center measurements) I'd be more than happy to help you narrow down what you're looking for to get your trailer up and running!
view full answer... - How to Change Spring Center on e65GR Trailer AxleIn order to change the spring center on the Trailer Axle with Idler Hubs # e65GR you will need to cut off the existing spring seats. Once they have been removed, you will need to have # TRSS238 welded on to match your 72" measurement. If you have some kind of adjustable bracket I do not recommend using it. There should be no way for the leaf springs to move horizontally along the axle aside from moving the spring seat.
view full answer... - Wider Axle Options For a Harbor Freight 4 x 8 Folding Trailer Which Allow For Larger Wheels & TiresOur narrowest 3,500lb axle is going to be the Axle # e65GR which is 89" from hub face to hub face. To mount this and widen your trailer you will need to modify the trailer which will entail new frame and suspension components. We do have a 72" wide 2,000lb Axle # e37YR which still exceeds the weight rating on your Harbor Freight trailer. This will still likely require some modification as it is about a foot wider than your stock axle. Both axles come with 5 on 4-1/2" idler hubs and will...
view full answer... - How to Choose the Correct Axle Capacity for TrailerThe axle capacity needs to be enough to handle the weight of the trailer plus whatever it is carrying. In other words, the axles need to meet or exceed the GVWR or gross vehicle weight rating. Assuming this is some kind of dump trailer with tandem axles I would say it weighs 2,000 lbs or more on its own. Add in the 9k lbs it can carry and you would be looking at 6k axles at a minimum, possibly 7k if the trailer is heavier. You will need to know the exact GVWR to select the right axle. For...
view full answer... - Replacement Hub Needed for Older Trailer Axle with M12649 and LM48548 BearingsWhile we do carry a replacement for your LM48548 bearing, listed as part # LM48548 on our site, none of our hubs use this bearing and from what I'm seeing your bearing combination is for very old trailer axles. I recommend swapping out your axle to something more current that you'll be able to easily find service parts for, like bearings. To choose the correct replacement axle we'll need to find out the weight rating of your current axle as well as the spring-center and hub-face dimensions. For...
view full answer... - Weight Of Westlake ST205/75R15 Trailer Tires With 89 Inch 3,500LB Axle Idler HubsThe Westlake ST205/75R15 Radial Trailer Tire w/ 15" Black Spoke Wheel # WST44FR weighs 43lbs each. Do note if you have an aluminum wheel like the Westlake ST205/75R15 Radial Tire w 15" Lynx Aluminum Wheel # LHAW320, it is only 37lbs each. Our etrailer Trailer Axle with Idler Hubs # e65GR weighs 54lbs. This will give you a total weight of 128lbs-140lbs depending on the exact wheels you use.
view full answer... - Replacement Axle, Bearings, and Hubs for 2000 Nitro X TRL Boat TrailerBased on that UFP H-1377 hub I can tell you have 3,500 lb axles. We have the following complete axle kits available: -Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # e65GR -Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # e43SR -Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs # e52GR -Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500...
view full answer...
- Replacement Axle For Yacht Club Jet Ski Trailer With 89" Hub Face & Idler Hubs 5 on 4-1/2" While we do not offer a square axle we do have the Round Axle # e65GR which will fit your trailer. This has the 89" hub face to hub face and idler hub with 5 on 4-1/2" pattern you are needing. The spring center to spring center is 74" or you can have 2 new Spring Seats # TRSS238 welded on at the correct mounting width for your springs. You will need the U-Bolt Kit # CE23002 to install these axles since they are 2-3/8" round.
view full answer... - Can etrailer Trailer Axle be Used on Boat TrailerYes, our trailer axles like the etrailer part # e65GR can work on a boat trailer and would work great.
view full answer... - Replacement Axle and Leaf Springs for Pace American Enclosed TrailerFinding the correct replacement axle and leaf springs will require measuring and knowing your axle capacity. 2,990 lbs is not a typical axle capacity so I'm assuming that is the GVWR of the trailer. Try checking on the axle to see if you can identify it based on the axle tag. If not, you can measure the diameter or check the bearings to try to find the capacity. Once you have the capacity, measure from hub face to hub face to get the axle length. I have attached a video below which shows...
view full answer... - 89 inch 3,500 lb Trailer Axle, Suspension and Hangers for Utility TrailerWe do have 89 inch 3,500 lb trailer axles that come with idler hubs like the part # e65GR which is a straight axle or the part # e72GR which is a 4 inch drop axle. Both of these have their spring seats at 74 inches apart on center. Then for a leaf spring the part # e68SR is for a 3,500 lb axle and would work great. For a u-bolt kit to secure the axle to the leaf springs you'd want the part # APUBR-1 and for a single axle hanger kit with everything else needed you'd want the part # APS4. For...
view full answer... - Can 4 inch Drop Axle be Replaced with Straight AxleIf you happened to have enough ground clearance you could go with a straight axle but you would be losing about 4 inches of clearance between the tires. I attached a link to both styles of 3,500 lb axles we carry as well.
view full answer... - Can The etrailer Trailer Axle with Idler Hubs # e65GR Be Mounted Below the Leaf Springs? You can mount the Trailer Axle with Idler Hubs # e65GR in an overslung position by using the Over-Under Conversion Kit # K71-384-00. This will give you the additional height you are wanting.
view full answer... - Solution for Replacement Hubs on 1970's Homemade TrailerStarting with the first question, with or without that variance there are no hubs that use that bearing combination. It is likely an obsolete axle/hub based on the bearings and age of the trailer. This means the only solution would be to replace the axle that uses a modern bearing combination which will allow you to replace the hubs as well. To find the right replacement axle you will need the axle capacity as well as the length. I would check the axle tag to see if the capacity is listed....
view full answer... - Dimensional Drawing for etrailer item # e65GR Trailer AxleI would be happy to help you. I have attached a dimensional drawing of the etrailer Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs item # e65GR.
view full answer...
- Diameter of 3,500 lb Trailer Axle with Idler Hubs e65GRYes, the diameter is indeed 2-3/8 inches for the 3,500 lb axle you asked about, which is the following part number: - Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs # e65GR So they will work with U-bolts that fit 2-3/8" diameter axles like part # CE15286GA.
view full answer... - Is Downward Bend in Trailer Axle SafeStandard axles, like the Trailer Axle with Idler Hubs # e65GR, have a slight bend upward so that when you have the trailer loaded the axle is straight. If the axle becoming straight is the slight bend you're talking about then this is completely normal. If the axle is actually bending downward then it was either installed upside down or it has been compromised and is not okay to use. If you can let me know the hub-face and spring center measurements for your axle I can see if we have a...
view full answer...
- Replacement 3,500LB Spindle/Axle Options For Boat Trailer With Obsolete Tapered Spindle 5 on 4-1/2Your spindle is an obsolete size and will need to be replaced. We have a couple options such as our Replacement Weld On Straight Spindle # TRU77FR or the 4" Drop Spindle # TRU87FR both of which are designed to weld onto a 2-3/8" outside diameter axle tube. Then you will be able to use a standard size 3,500LB Idler Hub # AKIHUB-545-35-EZ-K. We also have some axle options if you would rather just get a replacement axle you can bolt on. Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern...
view full answer... - How to Determine Replacement Axle Fixing Up Older TrailerHi there Jason; thanks for that info and you did all the right measurements but unfortunately there is no hub that fits a spindle with those dimensions. This happens quite a bit on some of these older trailers so the best I can offer is replacing your axle with one that has a standard spindle and hubs. This will also make it easier to get replacement bearings and hubs in the future. I know it's not the answer you were looking for, but if you want to do this it's pretty easy to determine...
view full answer... - Replacement Trailer Axle with 86" Hub Face Measurement and 70" Spring Seat MeasurementWhile we do have a closer option for you than the etrailer Axle # e65GR, the axle has a higher weight capacity than you need. That is the Dexter Axle Beam - 5,200 # 8327816. With this axle, if you want to use idler hubs, that is the # 008-213-9B. When using these 5,200 pound parts, I recommend checking with the trailer manufacturer to confirm whether the rest of your trailer can withstand 5,200 pounds of weight. If your trailer is constructed for less weight capacity, you will be limited...
view full answer...
- Replacement Axle for E12RB Econ TrailerFrom what I was able to find about your E12RB Econ trailer it looks like you have a 3,500 lb axle. You will need to verify the capacity. In order to choose the correct replacement, you will need the capacity as well as the hub face to hub face measurement. See the attached picture that shows where to measure. If you find that your current axle measures 89" and has a 3,500 lb capacity you could use the Trailer Axle with Idler Hubs # e65GR you were looking at. If you can match up the spring...
view full answer...
- Will The Aluminum Viking Series Valhalla Trailer Wheel Fit The Hub Of The etrailer Axle # e65GR Yes, the idler hubs on the Trailer Axle with Idler Hubs # e65GR have a 5 on 4-1/2" bolt pattern and are designed to fit 13" to 15" wheels so they would be a compatible fit with the Aluminum Viking Series Valhalla Trailer Wheel # AX02350545BMFL. For tires we have two sizes that will fit the # AX02350545BMFL; ST175/80R13 and ST185/80R13. An ST175/80R13 tire, like part # AM10210 will have a 7" section width and 24.1" diameter. An ST185/80R13 tire, like part # AM10208, will have an 7.2" section...
view full answer... - Replacement 3,500LB Axle and Leaf Springs For Vintage Trailer With Flattened Leaf SpringsFirst I think you need to address the axle portion of your trailer since you have a fabricated lift block on a drop spindle axle. That axle likely is only rated for 2,000-2,500lbs by the look of it. By switching to a Straight Trailer Axle with Idler Hubs # e65GR you will be able to get rid of the blocks and those extremely long u bolts. This axle is also rated for 3,500lbs with a hub face to hub face length of 89" and spring center to spring center of 74". If your trailer has different...
view full answer...
- Comparing etrailer and Dexter 89" 3,500 Pound Axles With 5 on 4-1/2 Idler HubsThere are only two real differences between the # e65GR and the Dexter # 35545I-EZ-89. One is the compatible wheel size. The etrailer axle works with 13" - 15" wheels while the Dexter axle works with 13" - 17-1/2" wheels. The other is the warranty. The etrailer axle comes with a limited lifetime warranty and lifetime technical support from etrailer.com, while the Dexter has a 2-year warranty. Aside from this they are virtually identical. If you have wheels that are larger than 15" I would...
view full answer...
Do you have a question about this Trailer Axle?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video by:
Jacob T
Video Edited:
Chris R
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Carrie F
Installed by:
Conner L
Installed by:
Michael B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.