Is Downward Bend in Trailer Axle Safe
Question:
I have a 17 foot boat trailer the axle has a slight downward bend is that OK?
asked by: James M
Expert Reply:
Standard axles, like the Trailer Axle with Idler Hubs # e65GR, have a slight bend upward so that when you have the trailer loaded the axle is straight. If the axle becoming straight is the slight bend you're talking about then this is completely normal. If the axle is actually bending downward then it was either installed upside down or it has been compromised and is not okay to use.
If you can let me know the hub-face and spring center measurements for your axle I can see if we have a replacement for you. The axle I mentioned above has 89" hub-face and 74" spring-center measurements as you can see in the linked video and photo.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Trailer Wiring
- Q&A: Who Makes The etrailer Trailer Axle e52GR?
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 95" Long - 3.5K
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 5 Bolt Flange - 3,500 lbs
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55513 Review
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Wiring Harness Recommendations For a 2005 Toyota Tacoma
- Video: Curt LED 4-Way Flat Connector Vehicle End Tester Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Brake Controller
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer brake controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: lug nut
- Article: Trailer Tire Sizing
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Suspension Enhancement