Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.
Features:
Specs:
Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately)
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.
To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (105 Customer Reviews)
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.I don't know where to start with my review due to a lengthy "pay to delivery" purchase process. Moreover, I will sum it up and say, etrailer came through and refunded me my money back, and let me keep a NEW trailer Light harness package. Toward the end of this back and forth process while speaking to a etrailer customer service representative I felt kind of guilty, and surprised. I have never had an experience like this.
At the same time period, with a separate business matter, a company named ATTWOOD Marine products sold me a new "FAULTY" product, and did nothing .
I highly recommend "etrailer", due to there professionalism,and Integrity.
Working well. We did not use the license plate hanger because it didn't have a light on it. Ended up ordering another one with a light.
E-trailer is always great. I love how they produce instructional videos for their hitches. This hitch went on pretty easily with some help during the lifting process. The paper instructions were good. The only problem I noticed in the paper instructions is that it called for a 7/16” socket but it was actually an 11/16”. No biggie though. Great product from a great company.
Trailer light kit was a great price and shipping was fast.
Great looking light kit, great warranty and pleased with the overall experience. The price was great, the shipping fast and the communication excellent. Will buy more in the future from this vendor.
Basic items ordered which I receive quick. It was easy to used their website and I,m very pleased Thank you
Work great. Bright, and water resistant. !! No issues so far! Look great also!
Everything I needed was in the kit with good instructions. Delivery was right on time, With sales follow up I don't know how you could ask for better service.
That's why E-Trailer is the only place I shop now.
Mike B.
6/17/2016
Hi I am perfectly satisfied with everything I have gotten from e trailer. Will be back if and when the need arises.
Very good. Shipping not good.
Ordering this light kit was the first time I've used eTrailer.com.
What a pleasant experience. Ordering was a breeze and the follow-up customer service was first class.
Whenever I need trailer parts, it'll be eTrailer.com for me. I will recommend this web site to anyone I know.
I like to shop around online to find the best deal. I went to a competitor's web site that read "low price match guaranty". So I called them on the phone. Their rep said, "We can"t price match eTrailer.com". It was the exact same item. 25% lower price at eTrailer.
Fast shipping, excellent packaging.
And BTW, the lights worked out great.
One stop shop for a light overhaul, had to buy 2 smaller side lights to have the full set of lights needed to re-run all the lights and wires for my boat trailer, but this kit gave me 90% of what I needed.
I did have water get into one of the boxes, but a little epoxy around the wires where they enter the box, and problem solved. Best use of a day during my vacation was re-running all of the lights. No more lighting issues every time I put the boat in.
As described
I received the product in a timely manner. The problems started with installation. I was replacing an existing, non-functioning light set and the wiring appeared to be identical. I made some temporary connections and the red rear lights seemed to work with all functions. However, after hard-wiring and installing all of the lights they failed to work. The package included a bar code to access some installation videos. Unfortunately, these videos did not address the specific product I had, so they were of no use. After hours of experimenting I called for support. Support was friendly and had a technician call me back. After a couple of minutes of chatting, he informed me that this kit would not work with aluminum trailers and that I would need to install a separate, dedicated grounding connecting from all devices. Would have been nice to know that in advance, and perhaps there should be products and packages specifically for aluminum trailers.
Easy to wire, easy to install, and so far no issues. Only thing I wish this came with was some wire connectors with shrink tubing. Other than that, works as needed
Very easy installation! Had an issue with the running lights NOT working after installation. I emailed the team at etrailer.com and they helped me TROUBLESHOOT the problem. It was my vehicle. They went ABOVE and BEYOND to help me find the problem when the light kit installed perfectly the 1st time! Only took about 2.5 hours but that's because I was meticulous about all of the connections and sealing them in heat-shrink tubing for extra protection.
I recently purchased a used boat trailer that required lights, wiring and markers to be replaced. I called customer service at etrailer.com with a list of questions. The representative was very patient and extremely helpful in guiding me to the product she believed met my needs. The new light package was on my doorstep in 3 days. The lights were exactly what I needed, easy to install, and work perfectly. Etrailer.com will be my first choice for any accessory needed to repair or improve my trailer.
This is a cheap kit (made in Tiawan) I wish they sold the same kit with better quality that wasn't LED .The parts that I removed from the trailer were of much higher original quality. I would not recommend this product to anyone. The only parts I used from the kit were the tail lights. and license plate bracket. I threw away the side parker lights and went out and bought good ones.
I was pleased to get the order so quickly, but the parts bag was split open and half of the parts were missing. Because the outer box had a hole in it. I would appreciate another parts bag, because I don't know what parts are missing.
Was exactly as described, works perfectly with my trailer. Would give it a "Excellent" rating if it had included more thorough instructions for attaching the side marker lights and how to waterproof those. Otherwise great!
Purchased this product to rewire a 1980"s double-wide snowmobile trailer. These lights replaced the old ones perfectly, at a great price.
Wish there were more than six wire clips. Washers to backup lock washers would of been nice. All in all very happy with product.
It was so easy ordering my submersible trailer lights for my jet ski’s,thank you for the great price and fast service
There was no information as to the gauge of the wire or if a center brake light was supported. Good hardware, but more documentation would make it better.
Nice product. All high quality parts with all the hardware included. The customer service and communication made this transaction a step above what I've been accustomed to.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
11/10/2023
They are still working well.