Replacement Wiring Needed for a 6 x 10 foot Trailer
Question:
Ive got a 6x10 aluminum trailer that needs rewired. Was wondering if you all custom build wiring harnesses to my specs? It would be a 4 flat male plug. 4 marker lights and of course 2 rear lights....blinker,brake,and taillights. Let me know which department to contact. Thank you.
asked by: Brian B
Expert Reply:
We don't actually manufacture our wiring harnesses, but we do have some options available for you.
You can use the Wesbar Wiring Harness # 002220 to replace the wiring on your 6 x 10 aluminum trailer.
To complete the installation you will only need a Ring Terminal # DW05702-1 and Butt Connectors, part # DW05744-5 for 5 or part # DW05744-10 for 10. Just simply splice in the lights that you have into the wiring.
If you don't already have lights then you can use the Trailer Light Kit # TL16RK. This includes the wiring harness, rear lights, 2 clearance lights, and 2 reflectors, as well as some hardware. If you would like 2 additional clearance lights you can find those on our site with parts # A91AB, # A91CB, and # A91LW.
Products Referenced in This Question
Optronics Trailer Clearance and Side Marker Light - Submersible - Rectangle - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 2-1/2L x 1-3/16W Inch
- Amber
- Optronics
more information >
Mounting Bracket for Optronics 90 Series or 91 Series Trailer Lights - Self Grounding - Chrome
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Brackets
- Chrome
- Optronics
more information >
Plug - Single Wire with 12" Lead for A91 and AL91 Series Trailer Clearance, Side Marker Lights
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- Single Wire
- Optronics
more information >
Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Wiring
- Wire Connectors
- Ring Terminals
- 1/4 Inch Diameter
- 16-14 Gauge
- Deka
more information >
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Kit
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8L x 3W Inch
- Red and Amber
- Optronics
more information >
Product Page this Question was Asked From
Wesbar 4-Way Flat Trailer Wiring Harness - 20' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 11 - 20 Feet Long
- Plug and Lead
- 4 Flat
- Wesbar
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Recommendation For Electric Jack For 15,000-lbs Gooseneck Horse Trailer With Living Quarters
- Q&A: Recommended Replacement For An Atwood GC6AA-10E Water Heater
- Q&A: Trailer Taillight Lens Recommendation to Replace AISTP2 85
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Could Both Wires of 3rd Brake Light Logic Module Be Ran to Single Turn Signal Circuit
- Q&A: Where Exactly to Install Pacer Performance PP20-702 3rd Brake Light Logic Module
- Q&A: Trailer Lighting/Wiring Kit for Snowmobile Trailer
- Q&A: Troubleshooting Trailer Connection Getting HOT
- Article: Trailer Lighting Requirements
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Measure for Trailer Hitch Drop