How to Determine if Kodiak Disc Brake Kit K2R35DKG Will Fit a Trailer
Question:
I am looking at purchasing the below products to restore my 2006 5 Starr 5800lb trailer with tandem 3700# axles. Would these products all work with my application? Kodiak Disc Brake Kit 10inch Rotor 5 on 4-1/2 - K2R35DKG Bearing Kit for #84 Spindle L44649/L68149 Bearings 10-19 Double Lip Seal - BK2-100 Demco Hydraulic actuator w/ Electric Lockout - Disc - Zink Plated - 2inch Ball - 8600lbs - 8608611 HydraStar Kydraulic Brake Line Kit - Tandem Axle - 24foot - HS496-252 Waterproof, Over 80inch Aero PRO LED Trailer Light Kit with 25foot wiring harness - TLL36RK
asked by: Ray P
Helpful Expert Reply:
As long as your axle has 5 on 4-1/2 inch bolt pattern idler hubs plus a brake mounting flange the Kodiak Disc Brake kit part # K2R35DKG will fit it. Look for a plate behind the spindle with 4 bolt holes in it for the flange.
As long as the hubs of your trailer take L44649/L68149 bearings the bearing kit part # BK2-100 will fit them.
As long as the trailer has a 3 inch wide frame channel the Demco part # 8608611 will fit. The tandem brake line kit part # HS496-252 will work with the actuator and the disc brakes.
And the trailer light kit part # TL16RK would be a great option for trailer wiring.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Hydrastar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 25 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Hydrastar
more information >
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Kit
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8L x 3W Inch
- Red and Amber
- Optronics
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Convert from Hydraulic Drum to Hydraulic Disc Brakes on a Boat Trailer
- Q&A: Recommended Disc Brakes for 3,500 lb Axles
- Q&A: How High Up are the Bolt Holes on the Dexter DX89FR Actuator?
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Recommended Boat Trailer Winch For 5,000 lb Boat
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Disc Brake Actuator with Electric Lockout for Magic Tilt Trailer
- Q&A: Ranger Trailer Cool Hub Replacement Grease Seal AD2527E
- Q&A: Difference Between Kodiak 3,500 lb Hub & Rotor Disc Brakes
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes