Solenoid Shield for Dexter Model 60 Trailer Brake Actuators - Zinc

See what our Experts say about this Dexter Accessories and Parts

• Adding Electric Lockout and 5-Way to Trailer with Titan Model 60 Actuator
  To add an electric lockout to your Titan Model 60 actuator only requires the part # T4748800 and then if you wanted to add a shroud to protect the lock out you'd also need the part # T4835800183. To activate the electric lock out you need a reverse light circuit carried to it. Typically a 5-way is needed for this to carry the extra circuit. For a 5-way you'd then want the part # A40W5B which you can replace your 4-way with. For a 7-way to a 5-way adapter then you'd want the part # A75TB...
  view full answer...
• Can a Reverse Lockout Solenoid Be Added to an Actuator That Does Not Have a Lockout Solenoid
  Yes, you can add a solenoid valve to your brake actuator on your trailer to prevent the brakes from locking up when in reverse as long as you have the standard 3/16 inch brake lines on your trailer. This valve will attach between the master cylinder and your brake line and it will wire into the reverse light circuit on your trailer. Once your vehicle is put in reverse the solenoid valve closes and prevents pressure from reaching the brakes. Make sure that when you are backing up that...
  view full answer...
• Comparing Demco and Titan Disc Brake Actuators with Electric Lockouts
  That is a tough question to answer as both are excellent manufacturers with their respective pros/cons. In regards to brake actuators, they both make and manufacture them here in the U.S.A. and they both come with a one year warranty. In regards to differences, Demco makes a wide range of different trailer and towing products whereas Titan specializes more in trailer brakes. WIth that being said we have had more positive feedback from Titan products in regards to trailer brakes, actuator...
  view full answer...
• Recommended Replacement Brake Actuating Surge Coupler for Atwood 85778
  Thanks for the photo. That is a great help for getting you the correct replacement. I recommend the Demco Hydraulic Trailer Brake Actuator - Drum Brakes - Zinc Plated - 2" Ball - 7,000 lbs # DM72VR for a zinc plated option. This coupler does not have the reverse lockout, so you will need to add it using the Replacement Solenoid Valve for Titan Brake Actuators with Reverse Lockouts # T4748800 and the shield # T4835800183. We don't have any Atwood replacement master cylinders any longer...
  view full answer...
  
• Parts Needed to Backup Without Putting on the Surge Brakes When Parking or Launching a Boat Trailer
  Yes, there is a way to back up your boat trailer and keep the surge brake actuator, # T43397007K, from applying pressure to the trailer brakes. You will need an electric lockout solenoid, # T4748800, which will close when you shift the vehicle into reverse, allowing the trailer to be backed. Along with the solenoid, you will need a solenoid cover, # T4835800183, if your actuator is the model 60 actuator that you referenced. The cover will keep the solenoid from getting stepped on and damaged...
  view full answer...
• Titan Surge Brake Actuating Coupler to Replace Atwood Coupler
  The Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7K # T43397007K is a great option for the Atwood coupler replacement. This does not include the electric lockout solenoid # T4748800. The brake line fittings will be the same. The Dexter DX7.5 Drop-N-Go Brake Actuator - 2" Ball - Zinc Plated - 7,500 lbs # 099-175-00 is also a great replacement option, and you can add the Replacement Solenoid Valve for Titan Brake Actuators with Reverse Lockouts # T4748800 to this...
  view full answer...
• 7k Titan Leverlock Surge Actuator with Electric Lock Out for Drum Brakes
  What you'll need is the Titan Zinc-Plated, Leverlock Brake Actuator # T43329007K with the electric lockout # T4748800 and the shroud part # T4835800183 and you'd have basically the # T4339720 but with a LeverLock latch system!
  view full answer...
• Replacing Titan 60 Lever Type Latch With Electric Reverse Lockout for Drum Brakes Recommendation
  Yes, check out the Dexter Drop-N-Go Brake Actuator part # 099-175-00. This is a drum brake, model 60 style actuator with a 7.5k capacity, and is the replacement for the leverlock latch system. All that is missing is an electric lockout solenoid which can be purchased separately, part # T4748800. We have learned that in order to attach this solenoid to the master cylinder, the fitting that is currently on the master cylinder will need to be removed and the solenoid threaded directly on in...
  view full answer...
• Can a Reverse Lockout be Added to a Surge Brake Actuator That Doesnt Have a Lockout
  Yes, you can add the Replacement Solenoid Valve # T4748800 to the Titan Adjustable-Channel Brake Actuator # T1891100. This will make it so that when you put your vehicle in reverse your trailer will not lock the brakes on you as long as you are using 3/16 inch brake lines. You will also want to make sure that you protect the solenoid. You can use part # T4835800183 to do so.
  view full answer...
• How To Stop Brakes On Trailer From Locking When In Reverse Using Titan Model 10 Brake Actuator
  What you will need to do is install the Replacement Solenoid Valve, part # T4748800. The Titan Replacement Solenoid Valve # T4748800 will stop the brakes from activating when you are in reverse. You may also be interested in the Titan Solenoid Shield, part # T4835800183, which will protect the solenoid valve from being stepped on if you do not already have a cover.
  view full answer...
• Titan Model 60 Drum Brake Actuator with Electric Lockout
  The Titan model 60 drum brake actuator # T43397007K does not feature an electric lockout but does have the multi-fit type ball coupler rather than a lever lock style. You can simply add an electric lockout to the existing coupler. This will save you time and money. My contact at Titan confirmed this is a good way to go. You can use parts # T4748800 and # T4835800183.
  view full answer...
• Lock Out Recommendation for Titan Trailer Actuator part # T43397007K
  The Titan Leverlock Brake Actuator, # T43397007K, that you referenced does not include a lockout system for backing your trailer, but an electric lockout solenoid, # T4748800 will fit and work well to give you a lock out. With just these two parts you'd be set. I also recommend using a shield # T4835800183 to both protect and give the finished look.
  view full answer...
• Does Drum Brake Master Cylinder Need to be Replaced with Atwood Master Cylinder for Disc Brakes
  I spoke with the Titan, who confirmed that the master cylinder # T4820000 is indeed the correct replacement when switching from drum to disc brakes. Because hydraulic disc brakes operate at a higher pressure (1,500 psi) than drum brakes (1,000 psi), the master cylinder used for your current drum brakes won't deliver the required pressure to effectively actuate disc brakes. If your current Titan Model 60 doesn't have the electric lock-out feature that defeats the brakes when the vehicle's...
  view full answer...
  
• Switching From Drum Brakes With an Actuator to Disc Brakes
  Yes, all you have to do to switch from drum brakes to disc brakes on the actuator is replace the master cylinder. We have the Disc Brake Master Cylinder for Titan Actuators # T4747100 which is the master cylinder that you will need to complete this task. For your solenoid replacement I recommend part # T4748800. If your actuator was made before 2010 then you will need to use the Replacement Solenoid Adapter Fitting # T4750200 so that it will fit on your actuator. I also recommend using...
  view full answer...
• Orientation of Roller Assemblies when Reassembling Titan Model 60 Brake Actuator
  When assembling the roller assembly, the rollers should be installed so that the beveled edges face the outside of the tongue, away from the shock absorber. I have confirmed this with my contact in the Technical Services department at Titan.
  view full answer...
• Can the Electric Reverse Lockout Solenoid be Used on a Titan Model 60 Trailer Brake Actuator
  It sounds like your model 60 actuator is for drum brakes and it has the check valve inside the master cylinder. You can use the electric reverse lock out solenoid # T4748800 with the model 60. It will attach directly to the master cylinder and the brake line will attach to the other end. When the vehicle is in reverse, it will not allow fluid to go back to the brakes. The electrical connection needs to be made to the vehicle reverse light circuit. You will also want to protect the solenoid...
  view full answer...
• Using Front Hitch To Move Trailer With Hydraulic Surge Brakes
  If you have a manual lockout, you will be able to use that and navigate with your front hitch without any wiring. If you have an electric lockout, you will need to supply 12 volts to that solenoid to release the brakes. I'd suggest getting a matching connector for your trailer like # PK11893 or # HM47900 and hardwiring the reverse wire directly to your battery and run a ground wire to the negative battery terminal from the connector. This will allow you to have that single function to...
  view full answer...
• Replacement Titan Master Cylinder and Backup Solenoid Needed For My Titan Model 60 Actuator
  For a replacement master cylinder you will need the Titan Replacement Master Cylinder, part # T4395100, to use with your Titan Model 60 Actuator. Then, you will want to use the Titan Replacement Solenoid Valve, part # T4748800. This Titan Replacement Solenoid Valve # T4748800 will stop the brakes from activating when you are in reverse. You may also be interested in the Titan Solenoid Shield, part # T4835800183, which will protect the coupler from being stepped on if you do not already...
  view full answer...
• Disc Brake Master Cylinder for a Titan Model 10 Actuator
  To convert your Titan model 10 actuator to work with disc brakes you will have to change out the master cylinder with # T4747100. The solenoid is something else entirely. The replacement master cylinder will fit directly in place of the existing master cylinder.
  view full answer...
• Can 4-Pole to 7-Way Adapter Be Used for Boat Trailer With Surge Coupler
  You're correct, an adapter like the # 30717 would work fine for you, although I'd personally go with the # 37185 as it has a 4-pole connector as well. Initially, you'd just plug the adapter into your 4-pole, ground the white wire to the truck frame and you'll be good to go. Once you add the solenoid like # T4748800 and the protective shield # T4835800183 (because you just know you'll trip on it and snap it off while stepping over it if you don't) you can tap that purple wire on the adapter...
  view full answer...
• Reverse Lockout Solenoid for Titan Model 60 Hydraulic Brake Actuating Coupler
  We've got exactly what you're needing, part # T4748800. Because folks attempting to step over the trailer tongue frequently trip over them and break them, using a shield like # T4835800183 is also recommended. I've linked to a product video for the shield and an install video for the solenoid.
  view full answer...
• Replacement Master Cylinder and Backup Solenoid for Titan Model 60 Trailer Brake Actuators
  Since the fitting broke off, there could be other damage to the master cylinder, so I would recommend that if you keep your Model 60 Actuator, replace the master cylinder with # T4820000 for disc brakes or # T4395100 for drum brakes. The Replacement Solenoid Valve for Titan Brake Actuators, is # T4748800. It fits Titan Model 6, Model 60, Aero 7500, Model 10, and Model 20 actuators. I could not find any information on a Model 66.
  view full answer...
• Need Adapter to Connect Titan Model 10 Master Cylinder to Reverse Lockout Solenoid
  The reverse lockout solenoid you recently purchased, part # T4748800, is intended for use in a number of actuators from Titan and Dico, including newer production of the Titan Model 10 Drum Brake Actuator. In these applications the valve, with its 1/8-27 fine pipe threads, should be a direct fit. Please note that it is necessary to remove the orifice connector (part # T1209800) from the back of the Model 10 actuator before installing the reverse lockout solenoid. If your Model 10 is from...
  view full answer...
• Parts Needed to Repair Brake Line Connection on Titan Model 60 Hydraulic Trailer Coupler
  It looks like that is a piece of flexible brake line you are using. You would need standard flexible brake line with a 3/8 inch male fitting. We offer them in varying lengths. A 13 inch long brake line with fittings (male on one end, female on the other) is available as part # T0777300, 18-25/32 inch length as part # T0776500 or a 25 inch long line is available as part # T0980100. If you do not already have one installed, I would recommend a solenoid shield, part # T4835800183 to protect...
  view full answer...
  

Do you have a question about this Accessories and Part?