RoadMaster Stop Light Switch Kit
(26 reviews)
Price: $49.60
In Stock
RoadMaster Stop Light Switch Kit
Item # RM-751452
Retail:$57.99
Our Price: $49.60
You Save: 14%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (26)
- Q & A (0)
- Photos
Roadmaster Tow Bar Braking Systems - RM-751452
- Stop Light Switch
- Roadmaster
Avoid damage to your vehicle by ensuring that your supplemental braking system is properly positioned and working effectively. Kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.
Features:
- Activates motorhome brake-monitoring system whenever brake pedal in towed car is applied
- Ensures that the supplemental braking system is functioning properly
- Works great for any application that does not have a tow position in the ignition
- Wires directly into towed car's fuse box for constant current
- Made in the USA
Specs:
- 12 Volts
- Application: custom fit for your vehicle
This kit allows your RV's monitoring system to alert you whenever the brake pedal of your towed car is being applied. Other systems operate according to whether the air cylinder is extended and provide no indication of what is happening with the pedal itself. If your supplemental braking system is improperly installed, it may be continuously pressing on the pedal, impeding it from fully retracting and possibly causing damage to your vehicle's tires and braking system. With Roadmaster's Stop Light Switch Kit, you will always know when the brake is being depressed, and you will avoid costly damage.
751452 Road Master Stop Light Switch Kit
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2014 Jeep Wrangler
- 2007 - 2014 Jeep Wrangler Unlimited
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
RoadMaster Stop Light Switch Kit - RM-751452
Average Customer Rating: 4.7 out of 5 stars (26 Customer Reviews)
Avoid damage to your vehicle by ensuring that your supplemental braking system is properly positioned and working effectively. Kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.by: Bill H.10/15/2014
There was a challenge presented when installing the Roadmaster Stop Light Switch (Kit #751452) on my 2015 Jeep Wrangler Sport Unlimited. The kit's Black C Bracket was not able to swing around fully to allow the kit's gray stop switch to be in line with the brake pedal. This was due to blockage caused by existing jeep's stop switch gray mounting bracket. As a result, I had to cut a notch using a Dremel and a grinding bit. The area where I had the interference from the jeep's bracket and the notch to allow proper installation is indicated in the attached photo.
It is imperative that the kit's stop light switch when mounted correctly is fully depressed. If not, 12 volts will be sent to the Evenbrake's transmitter which will result in an alarm and failure to use the Evenbrake system.
Also in reference to the Roadmaster installation instructions, there is no removable lower plastic cover. Installation requires twisting ones body under the dashboard with limited use of my left arm (I am right handed) to use tools.
I ordered the stop switch from etrailer.com. I am using a Roadmaster Evenbrake system. I do want to state a clarification concerning the battery based on what I read in etrailer's and other forums. You do not have to disconnect the jeep battery on the 2015 Wrangler Sport Unlimited Model. Jeep made a change in the second edition of the 2014 operators manual which is reflected in the 2015 manual. The earlier 2014 edition did state the disconnecting of the battery before towing. I had informed the Roadmaster tech department of this change.
The 2015 Jeep Wrangler Sport Unlimited steering column does not lock. You do not have to leave the key in ignition. You can remove it when ready to tow.
My 2015 jeep has the power convenience group. The vehicle has two 12 volt convenience outlets. One is only powered on when the ignition switch is on. The other outlet is connected directly to the battery via a fuse. It is on all the time. This is the outlet I use for the Evenbrake. Now, Jeep does state not to plug in devices that use more than 13 amps or 160 watts. Roadmaster as per their installation manual indicates that the maximum draw of the Evenbrake is 10.8 amps. I reviewed all the above to the Roadmaster tech department and they said I should not have a problem using the Jeep's always on 12 volt outlet. We recently went on a camping trip on Columbus Day weekend to a campground 120 miles from the house and no power problems were encountered with the Evenbrake system.
One other clarification is that the Jeep's brake lights are tied into the power convenience/electronics system. The brake lights will operate for a short period of time after the ignition is turned off and/or you open the jeep's door. Use of the brake lights will time out. This is the primary reason why I chose the stop light switch bracket kit.
The Roadmaster Evenbrake transmitter and the hot leg to the kit's stop light switch are fed from a dedicated 10 amp fuse protected line from the battery. This way, I avoided drilling a hole into the weather resistant under the hood fuse box plus negating the need to make rube goldberg connections to existing fuses.
by: Dave t12/12/2014
Thanks to a review I was aware I might have to grind out part of bracket to get it to fit. I did have to. Roadmaster said it wasn't necessary . I think they have to update the bracket for the newer models.
Etrailer was more helpful than Roadmaster.
Dave T.
12/12/2015
Works great forgot it was even there
by: John C10/12/2021
The towing package I purchased from etrailer has made all the difference in our RV trips. My jeep wrangler can go everywhere we go, easy to hook up and thanks to the invisa brake no strain on the RV brakes. Full system required a mechanic to install but all in all very happy..
by: Robert04/10/2018
This product was exactly what I needed. I wanted an indicator light that told me when the brake pedal moved on my towed vehicle, not when my brake system was activated. This part fit perfectly on my 2014 Jeep Wrangler sport. Others with newer wranglers reported having to notch bracket but there was no need for that on a 2014. I wired mine a little differently than the instructions show and there was no need to tap into the wiring on my Jeep. My indicator light recieved constant power from my coach, when the brake is pushed it completes the circuit with a ground from the coach and the light comes on. I feel confident that if there is a problem and my brakes are activated when they shouldn’t be I will be aware of this before it causes damage to the toad brakes. Great product
by: 2011 gl35007/25/2019
Product works as promised. My suv did not have a brake switch. The bracket did not work so i customized one for this car as there was non available. But once all installed towing feels much safer with the brake controller got here
by: Dan S05/11/2017
The thought of tapping into a car's electrical system makes me very nervous. So I bought this switch to eliminate that requirement. The alignment with the pedal was not perfect so I thought I might have problems down the road but I have not.
by: David06/03/2020
The items I ordered which are to complete the setup for my Jeep Toad arrived in a timely manner and were exactly what I needed. I have not had the opportunity to install yet but I don’t anticipate any issues as I have reviewed the instructions. Tammie was great to deal with and was very knowledgeable. This is not my first dealings with etrailer and won’t be the last. Great service and knowledgeable. Thanks. Keller Texas. Don’t have any pics yet.
by: Dan12/13/2017
I installed this product so I could monitor the application of the brakes on my toad from the cockpit of my motor home. Easy install, and worked like a charm. I highly recommend this product.
by: Ralph Cutler06/25/2016
I rec. the product on time , installed it and it work great the whole process was great, and thank you doing everything you said you and the product would do.
Ralph
Ralph C.
6/29/2017
great
by: Walt 12/30/2020
Works fine but you need arms like an octopus unless you remove the drivers seat to get enough room under the dash
by: Cathy08/10/2019
etrailer is the most dependable and with quality items! I wouldn't use anyone else!
by: Norm I08/13/2022
Works as it should
by: George03/03/2019
Fit as advertised.
by: Russell01/06/2018
I just received this product and have not had the time to install
by: Steve G07/16/2019
Easy hook up worked great.
by: 05/19/2023
by: Walter11/17/2017
Product works well
by: Debbie 02/20/2023
by: Carolyn11/16/2021
by: Babara06/24/2021
by: Charles R. 10/18/2018
Great product. Easy to install
by: Mike 10/06/2023
by: Robert 07/02/2021
by: Michael 12/26/2021
by: Robert 07/08/2022
25
26
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Braking Systems
- Recommendation For Supplemental Braking System For 2014 Jeep Wrangler SportBoth the SMI Stay-IN-Play DUO Supplemental Braking System, Item # SM99251, and the Roadmaster InvisiBrake Supplemental Braking System, Item # RM-751452, are confirmed fits for your 2014 Jeep Wrangler Sport. Both do the same thing in basically the same way. Where there is a significant difference is the installation. Our installers prefer the SMI Stay-IN-Play because it is a quicker and easier installation. Because of the easier installation process, I recommend the SMI-Stay-IN-Play...
view full answer... - What do I Need to Flat Tow a Jeep Wrangler JK with Factory BumperTo flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite Relay, # RM-88400, (2012, 2013, 2015-2018) or a Stoplight Switch, # RM-751452 (2007-2011, 2014). For your base plates and tow bar, I recommend using the Roadmaster Direct Connect Base Plate Kit, # RM-521448-5 for 2010-2018 or # 1429-3 for 2007-2009,...
view full answer... - Parts Needed to Flat Tow 2010 Jeep Wrangler Sierra UnlimitedFirst, you will want to make sure that your 2010 Jeep Wrangler Sierra Unlimited will not exceed your towing vehicle's maximum towing capacity. You will also want to check your owner's manual for instructions on recreational towing for your vehicle. If your Class C motorhome is capable, you will need a base plate kit, tow bar, braking system and wiring kit. For a Jeep with a typical factory bumper and no aftermarket winches or other items attached, I suggest the the Roadmaster EZ5 Base...
view full answer... - 2013 Jeep Wrangler Unlimited Parts for Flat Towing Behind Class A RVFor a complete flat towing setup on your 2013 Jeep Wrangler Unlimited Rubicon you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Usually the parts alone cost a couple thousand dollars depending on what parts you're using, and then if you're going to be having this installed by a shop you'll need to have them give you an estimate for installing all of the parts. We have everything that you need...
view full answer... - How to Find the Stop Light Switch on a 2017 Ram ProMaster 1500In order to find the stop light switch or cold side of brake pedal on your 2017 Ram ProMaster 1500 to install a brake controller like the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 you will need to test each of the wires with a circuit tester like part # ALL640595 for the one that is only hot when the brake pedal is depressed. Unfortunately I do not have any information that tells me what color wire that is. If you cannot determine which is the cold side of brake pedal...
view full answer... - How Much Does Flat Towing Setup For 2014 Jeep Wrangler Weigh?I would be happy to help. The weights of the products you mentioned are as follows: Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521448-5 42lbs Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-520 61lbs Roadmaster Even Brake Portable Supplemental Braking System - Proportional # RM-9400 24lbs You will still need safety cables, wiring, and a few components for the # RM-9400 to tow your 2014 Jeep Wrangler. For safety cables I recommend the RoadMaster...
view full answer... - Recommended Base Plate And Other Items Needed To Tow 2008 Jeep Wrangler With Stowmaster Tow BarBased on the information you gave, I believe you have a Stowmaster tow bar similar to Item # RM-501. This tow bar is compatible with most Roadmaster vehicle-specific base plates. I would recommend the Roadmaster XL Base Plate Kit Item # 1429-1. These will fit with the standard factory bumper on the front of your Jeep. If you need safety cables then you can use Roadmaster 68-Inch Coiled cables Item # RM-643. If you have a different bumper on your Jeep then let me know and I will find the...
view full answer... - Roadmaster InvisiBrake Supplemental Braking System Charging Battery On Jeep WranglerThe Roadmaster InvisiBrake Supplemental Braking System # RM-8700 does give the vehicle a constant maintenance trickle charge when connected to your motorhome if the running lights on the tow vehicle are on. This will make it so you do not need to disconnect the battery when in use. There may be other parts needed based on the vehicle you are towing for this system to operate correctly. For instance, most Jeep Wranglers will require a stop light switch kit # RM-751452. If you give me...
view full answer... - Parts Needed to Flat Tow a 2010 Jeep Wrangler Unlimited with Warn/Mopar BumperI checked with Roadmaster and for MX base plates you would use # 1430-3 on a 2010 Jeep Wrangler Unlimited with a Warn/Mopar bumper as long as it is one of the following: 82211715, 82211715AB, 82209740AD or 82211715AC and skid plate part numbers 82210401 or 82210401AB For a compatible tow bar I reocmmend the Falcon 2 # RM-520 and safety cables # RM-643. For lighting if you will not be towing the vehicle often I recommend a magnetic kit # RM-2120. If you will be towing the Jeep often then...
view full answer... - Parts Needed to Flat Tow a 2005 Jeep Wrangler TJ Behind an RVThere are several main parts needed to flat tow your 2005 Jeep Wrangler (TJ); base plates, tow bar, safety cables, lighting, and supplemental braking. Since you like the Blue Ox tow bars we can start with Blue Ox base plates, # BX1120, which fit models that have the stock double tube or U-channel front bumpers. Then for a compatible tow bar I recommend the Alpha, # BX7380. It is rated for up to 6,500 pounds and comes with safety cables so you will not have to buy any separately. With...
view full answer... - Providing Power to the Blue Ox Patriot from the RV to Flat Tow a Jeep WranglerThe Blue Ox Patriot # BLU37TR operates on 12 volt power and can be connected using a 12 volt outlet kit # RM-9332. Also, to power the Jeep's lights you can use the diode kit # RM-15267. This includes the cord that will stretch between the Jeep and motorhome using the 7-way connector on the back of the coach. In addition you'll need a brake light relay # RM-88400 to keep the Jeep's brake signal from overriding the RV's turn signals. In addition, if the Jeep you decide on is a 2014 it...
view full answer... - Installation of Roadmaster Even Brake Supplemental Braking System on 2011 Jeep WranglerThe ICX Transmitter is included with the Roadmaster Even Brake System # RM-9400 and plugs in with the included cable. The Stop Light Switch # RM-751452 will then plug into the ICX Transmitter after you install the switch in the bracket. I've attached a video of the Evenbrake and a stop light switch being installed into a Grand Cherokee. The stop light switch is a different part number but the process is the same.
view full answer... - Recommended Baseplate For A 2008 Jeep Wrangler JK With Warn Elite Series Winch BumperThe etrailer Invisible Base Plate Kit # e98949 was designed to fit a standard factory bumper so you'll need the Roadmaster Direct-Connect Base Plate Kit # 1430-3 instead. Installation Notes: Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model. This bracket fits Moper/Warn bumpers having part number 82211715, 82211715AB, 8221175AC or 82209740AD and skid plate part numbers 82210401 or...
view full answer... - Parts Needed to Flat Tow a 2011 Jeep Wrangler with Roadmaster Base Plates and Curt Tow BarIn order to use the Curt tow bar # C19745 with Roadmaster EZ4 base plates # RM-521448-4 you would need to add adapter # RM-025 and also quick disconnects # RM-201 (to make the base plate arms easily removable). In addition to the base plates and tow bar you will also need safety cables, lighting, and supplemental braking to flat tow your 2011 Jeep Wrangler. For cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting the diode kit # RM-154...
view full answer... - Supplemental Braking System and Other Parts Needed to Flat Tow a 2009 Jeep WranglerUnfortunately, flat towing a vehicle can be expensive because there a number of parts involved and many of them are pretty costly. From our experience the surge brake style supplemental braking systems are not up to par with the electric systems like the Roadmaster InvisiBrake # RM-8700. The braking power is just inadequate. Using the InvisiBrake will give you great, reliable braking and once it's installed you never have to worry about it. With your 2009 Jeep Wrangler you'll also need...
view full answer... - Troubleshooting Even Brake Portable Proportional Braking System On 2015 Jeep Wrangler UnlimitedI called my contact at Roadmaster about the # RM-9400 and the troubleshooting message you keep getting. They told me that you need to check the green wire that is coming out of the # RM-751452 switch. You should only show current when the brake pedal is depressed. If you are not showing current, then the switch is probably bad or it has shorted out and needs to be replaced.
view full answer... - Cost-Effective Flat Towing Setup for 2009 Jeep Wrangler JK with 7/8 inch D-RingsWe do have some flat towing equipment for you to get your 2009 Jeep Wrangler to Jeep events and while there are cost effective options, flat towing equipment in general can get a bit pricey so you'll need to keep that in mind. With that being said, I have narrowed down the options for you to some cost-effective products. Since you have the D-Rings on your bumper I recommend using the Roadmaster D-Ring Adapters # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1" thick D-Rings. Both of...
view full answer... - Recommended Stop Light Switch Kit Needed When Flat-Towing 2011 Jeep Wrangler Sahara Unlimited Since the battery has to be disconnected when you are flat-towing your 2011 Wrangler, a supplemental stop light switch like part # RM-751452 will need to be installed. There are two wires on the stop light switch. One end connects to the IXC transmitter box and the other end connects to the positive battery post. That should take care of the issue you are having with your braking system.
view full answer... - What's Needed to Install Roadmaster Even Brake in 2007 Jeep WranglerFor your 2007 Jeep Wrangler Roadmaster recommends the Stoplight Switch Kit part # RM-751452 and the 12 volt outlet kit part # RM-9332 when installing the Roadmaster Even Brake part # RM-9400 and you'd be set.
view full answer... - Parts Needed to Tow a 2007 Jeep Wrangler with Rugged Ridge Bumper Behind a Motor HomeFirst, for your 2007 Jeep Wrangler with the Rugged Ridge bumper, there is only one base plate kit that will fit. You will need Roadmaster base plates # 1437-3. The bumper part number will have to be 11540-10 or 11540-11. If it is a different part number then none of the base plates will fit. I have included a link to the instructions to the right. On these base plates you can only use Roadmaster motor home mounted tow bars. I recommend the Falcon 2, # RM-520, that you mentioned. It is...
view full answer... - Where to Find Stoplight Circuit to Install Brake Controller in 2018 Toyota TundraSounds like you are looking for a circuit for the red wire of a brake controller which is for the stoplight circuit to tell the controller when to apply the brakes. For your vehicle we actually haven't gotten confirmation on what the best way to find that is. One solution is to use a stop light switch kit like the part # RM-751452 which attaches to the brake pedal to give you the circuit you need. Or sometimes the third brake light circuit can be used on the truck. Hopefully we have a...
view full answer... - Does 2009 Jeep Wrangler Unlimited Need Stoplight Switch KitThe Blue Ox Patriot III # BRK2019 would be a great choice as a supplemental braking system for your 2009 Jeep Wrangler Unlimited and it will require the use of the RoadMaster Stop Light Switch Kit # RM-751452. What this kit does is activate your motorhome's monitoring system to alert you when your Jeep's brake pedal is being pressed. It is a safeguard so you know the supplemental system is working properly and your Jeep's brakes aren't being activated at all times. Your '09 Wrangler Unlimited...
view full answer... - Stop Light Circuit Solution for Vehicle Where No Circuit is Present Near Brake PedalOne easier solution to get a stoplight circuit for installing a brake controller is to install a stoplight switch like the RoadMaster stop light switch part # RM-751452 which basically can give any vehicle a stoplight circuit for hardwiring in a brake controller like you are doing.
view full answer... - Is the Stop Light Switch Kit Needed When Installing the InvisiBrake on a 2017 Chevrolet ColoradoIf you are installing the Roadmaster InvisiBrake # RM-8700 on your 2017 Chevrolet Colorado then you will need the Stop Light Switch Kit # RM-751472 if you have adjustable pedals instead of part # RM-751452. The part you referenced is for a Jeep but the kit # RM-751472 is for your Colorado.
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane H
Test Fit:
Ryan G
Video by:
Andrew K
Video by:
Joshua S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Shelly K
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bill H.
10/17/2015
It works great