Roadmaster Rollaway Trailer Hitch Protector
(49 reviews)
Price: $126.30
In Stock
Roadmaster Rollaway Trailer Hitch Protector
Item # RM-050
Retail:$149.99
Our Price: $126.30
You Save: $23.69
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (49)
- Q & A (0)
- Videos (1)
- Photos
Roadmaster RV Skid Wheels - RM-050
- Hitch Mount
- Bolt-On
- Roadmaster
Prevents the trailer hitch from digging and dragging on pavement. Front-load design accommodates many hitches that other rollers will not fit.
Features:
- Designed for trailer hitches that sit close to the ground
- Fits most 2" x 2" trailer hitches
- Works with or without accessory installed as long as whatever is in the receiver doesn't hang below the Rollaway
- Solid steel roller
- Includes hitch pin and clip
- Distance from center of hitch pin hole to bottom of roller: 3-1/4"
- Limited Lifetime Warranty
050 Roadmaster Rollaway Trailer Hitch Protector
Video of Roadmaster Rollaway Trailer Hitch Protector
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Roadmaster Skid Wheels - Hitch Mount - RM-050 Review
Today, we're going to review part number RM-050. This is the Roadmaster Rollaway Trailer Hitch Protector. This part will prevent the trailer hitch on your vehicle from digging and dragging on pavement. It is a front-low design which will accommodate many hitches that other rollers will not fit.It is designed for trailer hitches that sit very close to the ground. It has a solid heavy-duty steel roller. When installed on your hitch receiver, this will work with or without a ball mount or a hitch accessory inserted into your hitch.
It does include the pin and the clip. A basic I want to give you an example of how this would insert into a trailer hitchI have an example here. This is a two-inch hitch receiver. Now, this rollaway part is designed for a hitch receiver that has a distance of 2 7/16 between the center of the hitch pinhole and the end of the face of your hitch receiver. At this distance, the support bar, which is right in here and on the bottom, will hold the rollaway tightly in place and level to the hitch receiver.
Now, if this distance on your hitch receiver is less than 2 7/16, there will be a gap between this bar and the hitch. If that gap is less than 1/8 of an inch, it will still work fine. Now, if that gap is more than 1/8 of an inch, you would have to weld shims onto to this or onto the hitch receiver to make it fit properly.What happens here is this would slide onto the front of your trailer hitch. As you can see, the hitch would lay into those support arms that are on there. If I run the pin through here, and as you can see how it lines up and lays in that support arm, this gap here, if there was ...
if that gap is more than 1/8 of an inch, you would have to weld shims on here to make it work correctly. If it's less than 1/8 of an inch, it would work fine. This part does come with the installation instructions which would pretty much mention all that I just talk to you about. That should do it for our review on part number RM-050.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Manufacturer issue
Customer Reviews
Roadmaster Rollaway Trailer Hitch Protector - RM-050
Average Customer Rating: 4.7 out of 5 stars (49 Customer Reviews)
Prevents the trailer hitch from digging and dragging on pavement. Front-load design accommodates many hitches that other rollers will not fit.by: Mike03/12/2024
These hitch rollers are a life saver - no more dragging and cutting asphalt any longer. This is my second purchase, first was on a 39 ft Canyon Star and now on a 30 foot VeraCruz. Roller does "NOT" interfere with the hitch.
by: David08/23/2022
Item works perfectly in my steep driveway, keeps my waste pipe from dragging! Exactly what I needed!
by: Anthony 04/01/2024
Just what I needed to fix the rubbing of the trailer hitch.
by: David04/05/2024
I installed this on my Class C Motorhome, and it has been great! No more dragging the hitch across driveways and inclines. Highly recommend.
by: Scott 02/12/2024
Worked like a charm. Take your time go slow. It does prevent bottoming out. I used on c class. Thank you
by: Scott 09/26/2023
Looks like it will do the job. Five stars for eTrailer. Four for this product, which appears reasonably well made but with sloppy paint job.
by: Robert 02/11/2024
Wish it was an about inch longer in height. Overall, nice fit and great quality.
by: Doyle11/11/2022
Nice solid, well built. But didn’t fix my problem, pulling out of my driveway slightly downhill , would still hit pavement and drag causing damage. Was hitting on the side brackets that hold wheel.
Jenny N.
11/22/2022
I checked and we do not have another product to offer that would provide a different solution.
by: Ralph 05/30/2023
Fits Ford Transit 350HD. (RV) . Seems to be well built and can take a beating instead of truck undercarriage.
by: Guy 04/06/2023
This exactly what I was looking for. Installed without a Hitch! (Pun Intended!
1
by: Road master roller 10/10/2017
Very well made, extra heavy duty, easy install and remove if needed. The fit for a 2” receiver is as advertised. I have a low spot when I enter the roadway where the hitch drags, this has fixed it. Looking forward to many years of severe.
Road R.
10/10/2018
It is a great product, it is doing what is was purchased for, my hitch no longer dragged the ground and because of the heavy duty design I expect to get a lifetime of use. Very pleased.
by: Clay R.11/13/2014
Installation could not be simpler, pull hitch pin, set it in place and slide in new longer pin. I now have piece of mind that I won't be damaging my tow bar or hitch going into some gas stations. I was thinking about bolting a Nylon skid plate to my hitch until a friend showed me the rollaway. Great device.
by: Jerry06/02/2019
The trailer hitch roller device fit perfectly the first time, no tools required and was done in less than 2 minutes. A high crown on the street caused my trailer hitch to gouge the pavement as I was backing out of my driveway. The roller works exactly as advertised and saves both the street pavement and the trailer hitch on the back of my 36 ft. class A motor-home.
by: Peggy 04/23/2020
We have a trailer hitch on the rear of our 32 foot 5th wheel (used primarily for bike rack) and it drags when we turn into our "sharp up-hill turn" driveway. This item is very sturdy and well made. Easy to install and fits well. Looks like it will take the pressure off the bottom of the hitch and prevent dragging. Will know after our next camping trip next month. E-trailer has always shipped promptly and items arrive well packaged and undamaged.
by: Robert06/04/2020
I have not yet used the hitch skid wheel. I was however able to fasten on a 4 inch skid wheel around the hitch itself. I was then able to back my 5th wheel down the driveway with no issues!! Needless to say there was no to return those wheels!! I will also be keeping the hitch skid wheel JIC!! Thanks!!
by: Gordon & Linda 06/29/2019
Despite being cautioned that this device might not be strong enough to take the load created by the motorhome hitch dragging on steep entrance/exit inclines to gas stations or plazas etc, it has stood up well when entering or exiting slowly.
by: Tom 08/10/2022
Performed fantastic! Protected my extended camper van from dragging on those low dips. Very easy to install on my Ford Transit 350.
by: James L04/18/2022
So far "As Advertised" only gave 4 starts due to no long term ability to see how it holds up over time. Without this device we would still be scrambling around on the ground to lay down 2x10 riser boards for my driveway. This has allowed us to pull our 36' Class A into our driveway.
by: Mike G.07/25/2011
Product was shipped quickly, arrived in good condition, performs as advertised. etrailer personnel were extremely helpful answering questions when reached by phone. A good online commerce experience.
by: David02/22/2022
Did not fit hitch on my 2020 Ford Transit 350 chassis (2021.5 Pleasure-Way Ontour 2.2 RV) and they charge 22.64 to return it.
Jenny N.
2/28/2022
I will have our customer service team reach out to you. This is designed to fit most 2 inch hitches.
by: Oliver07/20/2017
This product works great protecting the bike rack on my RV.
by: Lawrence07/22/2021
Delivered as ordered, exact part and undamaged!
More importantly it was delivered promptly, I had ordered the same part and Skirting from another retaier. it was ordered in June, we finally cancelled and ordered from etrailer, arrived days later. Thank you.
by: Ray R07/08/2016
Fits great. Haven't had occasion to use it yet but looks like just what I needed to keep from dragging my tail!
Ray R.
7/8/2017
Very well! Wish it did not stick down so far.
by: Myron10/31/2017
It arrived and was installed today. It looks like it will help with my motor home tail drag problem. Hopefully it will stand up to use.
by: Gordon 08/21/2022
Fits very well. Strong construction. Fortunately with careful driving, we seldom have needed it.
25
49
Show More Reviews
See what our Experts say about this Roadmaster RV Skid Wheels
- Will Roadmaster Rollaway Skid Wheel Fit the Factory Trailer Hitch on a 2011 Honda OdysseyThe Roadmaster Rollaway # RM-050 is designed for a hitch receiver that has a distance of 2-7/16 inches between the center of the hitch pinhole and the end of the face of the hitch receiver. At this distance, the support bar, which is at the bottom, will hold the Rollaway tightly in place and level to the hitch receiver.
view full answer... - Can I Use RollAway Hitch Protector RM-050 with A Reese HitchYes, part # RM-050 will fit a Reese Hitch with a 2 inch opening.
view full answer... - Does Roadmaster Rollaway Trailer Hitch Protector # RM-050 have a Weight CapacityI checked with Roadmaster and the Roadmaster Rollaway Trailer Hitch Protector # RM-050 doesn't have a weight capacity rating because it isn't meant to carry weight (except for brief periods when it makes contact with the ground). I have linked a video review of this product for you.
view full answer... - Can I Use the Roadmaster Rollaway on 1-1/4" Hitch ReceiverGreat question. I honestly can't recall ever seeing a hitch protector like the Roadmaster Rollaway # RM-050 that is designed specifically for 1-1/4" hitches, but that doesn't mean they don't exist. While it won't be a perfect fit, I don't see any reason that you can't use the Roadmaster Rollaway on your 1-1/4" hitch to accomplish your goal of keeping the hitch from dragging when coming out of your driveway. I would recommend putting a few washers on each side (on the inside of the Rollaway...
view full answer... - How To Prevent Hitch from Bottoming Out on Steep DrivewaysI do have a simple solution for you which will prevent damage to the trailer hitch but there's really nothing else you can do short or raising the vehicle or leveling the driveway, neither of which we can help with. That said, what we can offer is the Roadmaster Rollaway Trailer Hitch Protector part # RM-050 which will help protect the trailer hitch when not in use, driving up or down steep driveways. The skid wheel will make contact with the ground and rotate to prevent damage to the receiver.
view full answer... - Roadmaster Rollaway Trailer Hitch Protector With Hitch That Has Chain Tabs Below ReceiverThe Roadmaster Rollaway Trailer Hitch Protector # RM-050 will likely work with your trailer hitch that has the tabs on the bottom of the receiver as there does not look like there is going to be any interference. So long as the tabs are completely on the bottom of the receiver you should be fine.
view full answer...
- How to Prevent the Hitch from Scraping on a 2014 Mercedes-Benz SprinterI do have an option for you but due to the way the vehicle is setup, all of the trailer hitches they make for it will hang down rather low. The other option I have for you to prevent it from scraping the pavement would be to use a skid wheel like the Roadmaster Rollaway Trailer Hitch Protector part # RM-050. The skid wheel attaches to the hitch via the hitch pin hole and will prevent the receiver tube opening from scraping the pavement on inclines. I have attached a photo to show how...
view full answer...
- Using the Trailer Hitch Skid Wheel Protector, Part RM-050 To Prevent Receiver From DraggingThe solution I would offer involves a roller unit such as the Roadmaster Rollaway Trailer Hitch Protector, part # RM-050. The Rollaway CAN be used while towing, without interfering with the ball mount or accessory.
view full answer... - Is Roadmaster Rollaway Hitch Protector # RM-050 Compatible with a Valley Trailer HitchI spoke with my contact at Roadmaster, and it is possible that the Rollaway trailer hitch protector # RM-050 will work with your Valley trailer hitch, but they could not guarantee this. The most important determining factor would be whether the safety chain tabs come out below the hitch, or if they come off the sides. If the tabs come off the sides, you would most likely not be able to install the trailer hitch roller, but you should be able to install it if the tabs come down below the hitch.
view full answer... - Will the Roadmaster Rollaway Trailer Hitch Protector Work With a Gen Y HitchThe Roadmaster Rollaway Trailer Hitch Protector, # RM-050 will most likely work with your hitch but you will need to take a few measurements for confirmation. You will need to measure on the center of the hitch pin hole of your Gen Y hitch to the face of the hitch. We are needing 2-7/16 inches. This designed for the support bar to seat firmly against the bottom of the hitch. If you have a gap, adjustments can be made but most hitches meet this measurement. Please see the attached product...
view full answer... - Will Roadmaster Rollaway Trailer Hitch Protector, # RM-050, Fit a 2010 Toyota SiennaThe Roadmaster Rollaway Trailer Hitch Protector, # RM-050, will fit the trailer hitch on your 2010 Toyota Sienna since it has a 2 inch receiver opening. Most 2 inch trailer hitches have the same outer dimensions, but there are a few rare cases with OEM hitches on trucks that have an extra large receiver design so it will not fit those. Another factor is the placement of safety chain loops. If the tabs come off the sides, you would most likely not be able to install the trailer hitch roller,...
view full answer... - Will the Roadmaster Rollaway Trailer Hitch Protector Fit on a 2 inch Hitch on a 2010 Toyota SiennaIf you have trailer hitch 78720, which is the same as our # 75237, the Roadmaster Rollaway Trailer Hitch Protector, # RM-050, will fit the trailer hitch on your 2010 Toyota Sienna. The way to check your hitch to be sure is to check to make sure the safety chain attachment, on the bottom of the receiver, does not extend out past the front of the hitch pin hole on the receiver.
view full answer... - Recommended Solution for Dragging Hitch Receiver on 2002 Ford VanThe best solution for this is going to be the Roadmaster Rollaway Trailer Hitch Protector # RM-050, which will work when you're towing as long as whatever is in the receiver doesn't hang below the Rollaway. This is ideal because it doesn't require any welding on, so it's ready to be installed right out of the box and will keep your hitch from getting dinged up when ground clearance isn't the best. I've linked our review video of this part for you to check out.
view full answer... - Available Hitch to Help Reduce Dragging When Pulling Out of Steep Driveway for 2015 Volvo XC60I may have a solution for you, but I checked with Stealth Hitches, who make the "removable" hitch receiver I believe you're referring to and they don't have a confirmed fit for your 2015 Volvo XC60 as of yet. With that said, a hitch with a concealed cross tube like the the Draw-Tite # 76116 might do the job for you. When installed, this hitch has 13-1/2" from the top of the receiver to the ground, so it's going to have a bit better ground clearance than any standard hitch. If you're finding...
view full answer... - Will Roadmaster Skid Wheel # RM-050 Prevent Scraping When Carrying Bike RackYes, the Roadmaster Rollaway Skid Wheel part # RM-050 will fit the Curt hitch you have installed part # 13358. To determine where the roller will be relative to the hitch height you'd need to measure 3-1/4 inches down from the hitch pin hole. Comparing that dimension to your current setup will allow you to know if you'd have enough clearance.
view full answer... - Protecting a Trailer Hitch Receiver from Dragging on a 1999 Winnebago ChieftainAdding the roller ball mount, # RM-051-4 will protect the receiver from getting damaged when contacting the ground. This unit is designed for tow bar use only. If you have no vehicle and tow bar attached then I recommend using # RM-050. It is the same concept but it fits directly to the receiver.
view full answer... - Will the Roadmaster Rollaway Hitch Protector Fit a Dual Hitch ReceiverYes, I do not see any issues with the compatibility between Roadmaster Rollaway hitch protector # RM-050 and dual hitch receiver # RM-077-4. Take a look at the video for the hitch protector I have linked. You can see how it attaches to a receiver showing how there wouldn't be interference between the 2 parts.
view full answer... - Skid Wheel Preventing Trailer Hitch Bottoming Out on Steep DrivewayI'm sorry to hear the ground clearance isn't what you need for your 2020 Kia Sedona EX due to the steep driveway. The Roadmaster Rollaway Trailer Hitch Protector # RM-050 is my recommendation for you which will work with or without an accessory installed in the hitch receiver. If you plan on using a bike rack, this may still not give you clearance for the rack or the bike wheels depending on the rack used, so that should be considered as well. This will protect the hitch itself from...
view full answer... - Trailer Hitch and Bike Rack Scrape the Ground when Going Up Inclines with 2006 Honda OdysseyRoller # RM-050 is a good option for a Class III trailer hitch on your 2006 Honda Odyssey. It does hang down lower than the hitch receiver so it will actually make contact with the ground sooner than if the roller were not on it. This roller will not help with the Kuat bike rack though. What might work better is to use # D210 and put the bike rack in the upper receiver. This will raise it up higher and keep it from scraping on the ground, even if the hitch does scrape.
view full answer... - Will Roadmaster Rollaway Trailer Hitch Protector # RM-050 Fit a Curt Hitch part # C13105Yes, the Roadmaster Rollaway Trailer Hitch Protector # RM-050 that you referenced will fit the Curt Hitch part # C13105 that you referenced because it is a 2 inch hitch like what this is designed to fit.
view full answer... - How To Prevent Hitch Scraping on Pavement with 2019 Toyota SiennaThe 2019 Toyota Sienna is a low ground clearance vehicle so there isn't much that can be done about a hitch like the etrailer Trailer Hitch Receiver part # e98837 scraping or bottoming out. That said, you can protect the hitch with an option like the Roadmaster Rollaway Trailer Hitch Protector part # RM-050 and that's what I recommend. I don't recommend lifting the vehicle to give more ground clearance as this will affect the ride quality and suspension geometry which can lead to other...
view full answer... - Using Class II Receiver Hitch Instead of Class III on 2011 Toyota Sienna to Gain Ground ClearanceAlthough different hitches for a given model year of vehicle can vary a bit, the orientation of the receiver will usually be the same. When installed, the Curt Class II hitch part # 12212 will measure approximately 11 inches from the top of the receiver tube to the ground. Due to the smaller receiver, you will gain around 1/2 an inch more clearance versus the Class III. I attached installation instructions for you to check out also. You might also consider the Roadmaster Roll Away Trailer...
view full answer... - Hitch Mounted Cargo Carrier For a 2016 Mazda CX-5 With Rise To Prevent DraggingI recommend the 20x60 etrailer Cargo Carrier for 2" Hitches # e98874 for your 2016 Mazda CX-5. This carrier has an 2" rise to position the cargo carrier higher on your Mazda. This carrier only weighs 48lbs and can support up to 500lbs. If you notice it is the receiver on your Mazda that is contacting the ground you will want to try the Roadmaster Rollaway Trailer Hitch Protector # RM-050 that will roll on the ground rather than digging into it with the receiver.
view full answer... - Will Roadmaster Rollaway Trailer Hitch Protector Fit my Chrysler Town and Country 2 Inch HitchThe Roadmaster Rollaway Trailer Hitch Protector is a universal fit item. It is designed to fit most 2 x 2 inch Class III and up hitches. We carry 2 different 2 inch hitches for your 2009 Chrysler Town and Country. They are Draw-Tite part # 75579 and Curt part # 13364. I got one of the Roadmaster RM-050 from the warehouse and tested on those 2 hitches and it fit both. If you have one of these 2 hitches, it will fit fine. If you do not have one of those hitches, it will probably fit. You...
view full answer...
Do you have a question about this RV Skid Wheel?
Info for this part was:
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David
8/24/2023
After a year this addition continues to perform as expected. Has saved me several times. Highly recommend!