Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (355 Customer Reviews)
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. Surface mount - hardware not included. 2-Wire design. P2 rated.I bought this to replace a broken original marker light on our 1995 motorhome.
Pros - LED, sleeker look than original, easy to wire if you are familiar with wiring lights for vehicles/trailers, priced better than incandescent.
Cons - The screw holes are closer together than my original fixture but I drilled a new pilot hole for the second screw and it was fine, the light sticks out further than the original, and I don’t like squatting or kneeling in order to fix things, anymore (but that’s just a reflection on me and not the light).
I would mark 5 stars for the products themselves but I've reduced to 4 simply because of the packaging. I ordered clearance lights and they were all thrown into a padded shipping bag with no individual packaging. After being tossed around through the mail, several of the light casings arrived scuffed and scratched. I would recommend shipping at least separates the products before mailing a bulk package. Otherwise, the products themselves seem to be as advertised.
Jenny N.
3/31/2023
Hey I do appreciate you letting us know. I will have our Customer Service team reach our and will also make our shipping department aware of it.
The led lights are still working. The problematic fuse in the car has not blown so switching from incandescent to led has been worth the cost.
Have had these for 1 year and still work great, good brightness and lens is holding color well. wish i would of noticed these have 3 leds vs 1 from the other brand i would of bought these for all my lights. great product
They worked great . Shipped and received in good order and on time .
Replaced burned out incandescent clearance light with LED. Been doing that with all my incandescent lights as they fail. Worked great and fantastic price. Wiring info on the etrailer web site also helpful. This was the closest match to the originals.
Very nice light and reasonably priced.If you use gaskets order them. Emailer is a great company and very efficient.
Joseph
12/13/2023
100 fine
I am sure the product is of average quality, however when you purchase multiple items from etrailer (some of substantial weight) and they box everything together without any packing materials to keep fragile items safe, the comfort and likeness of purchasing items through this retailer drops. Brought this up with their customer service, and they said it was packed properly.
Well, they are just lights – amber and red. But, I upgraded all my trailer lights to LED’s, and these continue to look and function great.
This is my second order of these lights. The first order was a test to see if I like the way they look to replace my old cracked and dirty incandescent lights. Once I put the new lights on my trailer, I knew I had to replace all of my lights because they look so great! They make my old 1999 Jayco look like new!
They're okay. They don't seem very bright, but I'll have to see them in the dark, I guess. They could have easily left the wires so you could use them as they are or pull them back inside for stud-powered applications. I had to drill holes in the light to feed the wires back inside of the light to hook them up. Would have been nice if they were going to just be dumped in a box and sent out if they had the protective film over the lenses. Out of 13, 1 isn't all scuffed up from shipping. The screws have a pedestal under the light, so that hits before the rest of the light, leaving a gap all the way around.
Great service, good product, excellent delivery.
Had a faulty light, and they quickly sent me out another one perfect A+
Works as described. Good replacement
Great product. Really appreciate that the wires are pre stripped. Just wish there was a seal for the backside of the lights to
Seal the back from water intrusion
Perfect replacement parts, Kim was awes ome.
Still looking and running well. We are so happy that we were able to find these and replace the old ones that were on our little toybox trailer.
Great replacements for my dull old marker lights
Nice size light to mount on 2" angle iron that I'm making a light bar to mount on the rear and top of my pickup bed. I'll be using the light bar while towing the pickup behind my motorhome this winter. I am using 2 of the these lights in the center of the light bar. I'll have 2 larger lights with brake and turn signals on each end of the light bar.
Erniet
10/14/2018
The lights mounted easily and were the right size plus they were bright!!!
Great prices ! ,fantastic service,fast shipping = 100% satisfaction! :-) thanks
I replaced 3 incandescent lights in the center rear top with the led's. The new ones fit the same holes and worked great. Not sure how bright they are as I have not checked at night. If I replace the others I will order the 10 led's for the side marker lights instead of the 3.
Wayne H.
3/19/2018
Just like the Energizer Bunny. Still going.
Very good quality. Nice and bright. Very reasonably priced
Bright little S.O.B. And should do the trick for my grounding problem. I needed room behind the light to screw the ground wire to the skin of the R.V. Since all I have is one hot wire coming out for placement of the lights.
Was told the gap behind the light was 3/8 of an inch but its more like 1/4 inch but should be enough room for a flat head screw with a wire under it.
Will use silicon to seal the screw and wire to keep it from rusting, the problem I had with the old lights using the mounting screw to ground the lights to the skin of the R.V.
Time will tell if all works out?? As planned.
Donald
11/5/2018
Good, no problems
Great product and fast service
Baltazar C.
1/26/2021
Great
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim
1/15/2024
There have been no problems whatsoever with the light. I don’t give it a second thought.