Replacement Lens for Optronics MC32 and MCL32 Series Lights

Question

Question:

I bought the MC32RB replacement lens and it seems to be a little too tight to fit on the base. Is there another model I am missing when I look through your inventory?

asked by: Lewis G

0

Expert Reply:

You aren't missing anything, no; the Replacement Red Lens for Optronics MC32RB and MCL32RB Trailer Lights # A32RB is exactly what you need as a replacement lens for either the Optronics Trailer Clearance or Side Marker Light # MC32RB (Incandescent) or # MCL32RB (LED).

This is the correct lens, though it will snap on so it will be somewhat tight; using a smidgen of force will snap it on.

expert reply by: Kyle S

0

Answer 1

We do offer both red and amber replacement lenses for the Optronics Rectangular Trailer Clearance Side Marker Light #MC32RB. The red lens is part #A32RB and the amber lens is part #A32AB. These lenses measure 4-inches x 2-inches x 1/2-inch and they…

view full answer...

Answer 2

I looked through all of the replacement lenses that we have and none are a match for what you are looking for. I wish I had better news for you.

view full answer...

Answer 3

I was able to find the exact replacement amber (1A-S-20A) and red (1A-S-20R) lenses. I did a Google search on kaper2 (or Kaper II), and found replacement lenses. Their replacement lenses are shown as measuring 4 inches long, by 2 inches wide by 3/4…

view full answer...

Answer 4

I went out to the warehouse to look at the Optronics Replacement Red Lens #A32RB referenced in your question. I measured the inside dimensions of the lens and it is 3-3/4 inches long x 1-3/4 inches in height. The actual thickness of the lens is right…

view full answer...

Answer 5

I called Rockwood to find out exactly which model of light they use on their pop-ups. This lens is for the exact light they used on your pop up. Part #A32RB is the red and if you need an amber you would use part #A32AB.

view full answer...

Answer 6

Both the #MC32RB and the #MC32AB do not have foam gaskets between the lens and the base. It is unlikely but possible that your current trailer lights had lenses that were once color and have now faded to being totally clear.

view full answer...

Answer 7

Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the #A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the part #MC32RB.

view full answer...

Answer 8

I believe you are referring to the Optronics SAE-A-P2-DOT-02 which I can see you were looking at. If so, then Replacement Red Lens for Optronics MC32RB and MCL32RB Trailer Lights #A32RB is the correct replacement lens. If you end up needing the whole…

view full answer...

Answer 9

The SAE number is not enough to help me find a replacement part for you. The SAE number simply tells us that the lens meets the government requirements for a taillight. I looked up your truck bed camper and the LED Trailer Clearance or Side Marker…

view full answer...

Answer 10

Hi, this is a snap-on red lens that replaces a damaged Optronics clearance or side marker light, it fits the MC32 and MCL32 series lights. It is 4" x 2". Please note the link for product review video.

view full answer...

Answer 11

For the SAE AP2 99 DOT lens we know that the part #A2RB is the correct replacement.

view full answer...

Answer 12

I went out to the warehouse and compared the Replacement Red Lens #A32RB and the Light Replacement Lens #34-59-010 and found that they are nearly identical so you should be able to use one over the other. They are from different manufacturers though…

view full answer...

Replacement Lens for Optronics MC32 and MCL32 Series Lights

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching