Correct Track Trailer Alignment and Lift Kit - Single Axle
(3 reviews)
Price: $182.54
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (3)
- Q & A (0)
- Photos
RV Ride Control Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- RV Ride Control
Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axle with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.
Features:
- Corrects a misaligned axle and lifts trailer for level towing
- Improves the life of your tires and creates a more stable ride
- Provides extra clearance so you can tow with your tall or lifted vehicle
- Lets you move axle up to 1/2" forward or 1/2" rearward for proper alignment
- Adjusts in 1/4" increments
- Raises trailer height by 1-1/4" or 2-1/4"
- Works with your existing leaf spring suspension system
- Brackets attach to hangers and supply new, lower mounting point for springs, which results in a taller ride height
- Alignment correction plates mount on either side of hangers to shift axle placement
- Includes 4 suspension plates, 8 alignment correction plates, and the hardware needed for installation
- No drilling required
- Made in the USA
Specs:
- Application: single-axle trailers and RVs with double-eye leaf spring suspensions
- Minimum required distance from I-beam to spring mounting hole on hanger: 2-5/8"
- Works with 3" wide x 3-3/4" tall hangers or 3" wide x 5" tall hangers and leaf springs up to 2" wide
- Plate length: 4-1/4"
- 90-Day warranty
Note: This does not work with MORryde CRE3000 equalizers.
Raise Your Trailer's Ride Height
Newer trucks are being built to ride higher. This means that your trailer may have to be raised to match. If the two aren't the same height at the connection point, the nose of your trailer or RV is going to ride too high. This will put too much weight on the rear of your trailer, which can result in poor handling and may eventually cause damage.
The Correct Track helps to solve this problem by lifting your trailer or RV 1-1/4" or 2-1/4", which provides a level towing setup for taller trucks. This added lift is also great for 5th-wheel trailers that might have trouble clearing tall pickup bed side rails.
Correct Misaligned Axles and Suspension
If the tires on your RV or trailer are wearing down quickly and prematurely, there's a good chance your axle is out of alignment. Driving with a misaligned axle for long periods of time will shorten the life of your tires, reduce your gas mileage, and can make it difficult to steer your rig. A misaligned axle is often caused by an imbalance of weight, which can result from simply using the slide-out on your 5th wheel or having heavy appliances positioned on one side.
The Correct Track integrates into your trailer's suspension system and shifts the axle back into proper alignment. This kit allows you to adjust the axle alignment by 1/4" increments for a properly aligned suspension. It will correct your RV or trailer's alignment whether the axle needs to be moved forward or backward.
9005934 Correct Track Trailer Alignment and 1-1/4" or 2-1/4" Lift Kit - Single Axle
Item # LC87120
Installation Details
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Correct Track Trailer Alignment and Lift Kit - Single Axle - LC87120
Average Customer Rating: 4.7 out of 5 stars (3 Customer Reviews)
Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axle with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.by: Michael10/29/2017
The listing for this product was confusing. I thought I was ordering the LCI kit, even double checked part numbers, they are the same. What I got was a kit by The Mobil Outfitters. Maybe they are part of LCI, I don’t now..... But, now I know why this kit is cheaper than the LCI kit, I performs the same function, but it’s a little crude. They supply grade 5 standard bolts where the LCI kit has the nice shoulder bolts. I guess I should have looked really hard at the picture, because the parts are displayed as you will get them.
Another big gripe for me was that the reinforced spring slot has its inside reinforcement plate slightly out of alignment with the main plate. Did not realize this until I forced a bolt through and ruined the fine threads on a bolt.
It gets the job done, just not as refined as the LCI kt.
by: Richard 11/30/2021
All the parts are quality made, but I had to replace the axle and didn't need to use the Correct Track Trailer Alignment and Lift Kit.
by: Joe 05/25/2021
Great customer service from beginning to delivery.
by: Dale07/20/2018
Good product, but even better customer service from etrailer. During installation, I realized 4 of the brackets in the sealed box were incorrect. With both axles dropped and our family leaving on vacation in a week, etrailer rep contacted the manufactured and had the correct parts in my hand in just a few days. Thanks for the great service!!
by: Damon04/09/2018
These have been on the camper for about a year and are working great. The only modification I made was to weld the top of the correct track to the spring perches after installation, as they moved just slightly and I wanted to be sure they did not.
by: Gary10/31/2017
This is the greatest product to align trailer axles. I have noticed that it is becoming standard on newer trailers. If you have never checked your axle alignment for a tandem setup then you might be off. My new trailer in 2014 was off a full 1 1/2 inches. This is for a friend's trailer that is off so much you can't put your hand between the tires. This is a "MUST" have.
by: Bruce08/12/2018
I was very impressed with the customer service provided by Ashley E. at etrailer concerning a recent order. She kept a tab on the status of an item that was on indefinate backorder, and made sure I received it as soon as it could be delivered, keeping me informed via email and phone calls. thank you so much Ashley!!
by: Keith09/23/2018
The product itself was good once I was able to find the appropriate bolts.
6 of the bolts were too short to use
I had to purchase 6 bolts and nuts from a specialty tire shop.
At a additional cost of $39.99, plus drive time.
Also, the package did not come with any directions.
by: Leroy11/10/2017
Good concept ..........easy enough to install.......... Missing bolts, some of the Slots for bolts needed to be Filed before installation.............Expected more Quality Control for that kind of money and only 6# of iron. Also the bolts are only Grade #5 and not the normal grade #8 of other shackle bolts.
by: Bob10/23/2019
Great product.
10
10
See what our Experts say about this RV Ride Control Trailer Leaf Spring Suspension
- Recommended Option To Add At Least 2 Inches Of Lift To A 2017 Heartland North Trail 32RETS TrailerTo get the amount of lift you want and having tandem axles, you will need QTY.3 of the Correct Track Trailer Alignment and Lift Kit # LC87120. This will cover all 6 hangers and will give you 1-1/4" or 2-1/4" of lift. In combination with the MORryde # MR34AR kit giving you 3/4" of lift already, you will have 3" of lift when all is said and done.
view full answer... - Lift Kit for Trailer Suspension that Spring is Already Above AxleTo lift the suspension of a trailer that already has the springs on top of the axles we have lift kits like the part # RR23QX for if you have a tandem axle trailer or part # LC87120 for if you have a single axle trailer.
view full answer... - MORryde Suspension Upgrade With Correct Track Trailer Alignment Wet Bolt LengthThe Correct Track Trailer Alignment and Lift Kit - Single Axle, part # LC87120, will require you to add longer wet bolts where the equalizer attaches to the hanger extension. The bolts measure 9/16" in diameter and they are 4" length, so your wet bolts will need to be at least that length. The bolts of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps, part # MR46ZR, have the correct diameter, but they are too short. Unfortunately, we do not have wet...
view full answer...
- Options For Lift Travel Trailer For More Ground Clearance I have a few options for raising your travel trailer to give you more ground clearance, but there is no air bag system that will raise and lower your trailer as needed. If you have the common 3,500lb axle the easiest option is an over-under kit assuming your leaf springs are currently installed underneath your axle. Using kit # K71-384-00 per axle will raise your trailer by around 4-5" depending on how many leaves your springs have. if you already have the leaf springs on top of the axle...
view full answer... - Lift Kit Recommendation for Single Axle Trailer for 2 inchesWe have just what you need with the Correct Track lift kit part # LC87120 which will give your single axle a trailer a lift of 2-1/4 inches.
view full answer... - Lift Kit That Can be Used with Trailer Axle that is 2.53 inch in DiameterWe have a lift kit that you can use with the Correct Track part # LC87120 but there isn't an over under kit that works with your axle diameter.
view full answer... - Leveling a Trailer To Match New Truck HeightThe LC407131 Would definitely help raise the Fifth Wheel. It will generally add approximately 2 inches to the height of the trailer. We do not have any install videos for this as of yet, but I did include a review for you to take a look at. Another add on you may want to check out is an Ultra-Fab skid roller # UF48-979023. This would install on the rear bumper and essentially gives you an extra wheel when you go over very steep grades. If neither of these get you nice and level, you could...
view full answer... - Lifting a Trailer With a 4 Inch Axle For Better Ground ClearanceWith a 4 inch axle, you have a few options. There is not an over under kit for this size axle, but you could replace the current hangers with longer ones, like the Dexter # HAP-105-00, depending on the size of your current ones. Another option would be the Correct Track Trailer Alignment and Lift Kit # LC87120. This gives you between 1 1/4 inches and 2 1/4 inches of lift. Though we do not have an install video of this as of yet, I did include a review video that goes into the specifications...
view full answer... - Recommendation For Raising 6 X 12 Single Axle Leaf Spring Trailer that Scrapes On Inclined DrivewaysI have a couple recommendations for you as using a longer Shackle Strap # TRSL313 will hardly give you any noticeable lift on your single axle 6' X 12' trailer. The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 will allow you to relocate your axle from on top of the leaf spring to below the leaf spring. To use this first you must have an axle that is mounted on top of the leaf springs and the axle must be 2-3/8" in diameter round axle. This will raise your trailer 2-3/8"...
view full answer... - Can You Reuse Older Wet Bolts On The Correct Track Trailer Alignment And Lift Kit?For your 2019 Silver Creek Silverback 35IK, you can use either two of the single axle kits # LC87120 for your tandem axle trailer, or you can use 1 of the tandem axle kits # RR23QX. The tandem axle kit is the exact same as two of the single axle kits, so you'd be good to good. When it comes to reusing your wet bolt you should be good to reuse it as long as you have (12) 9/16 x 3-3/8" bolts, and (2) 9/16 x 2-7/8" bolts. If not we actually have a suspension upgrade kit that is designed...
view full answer... - Trailer Axle Alignment Kits To Reduce The Amount of Blowouts On Trailer TiresThe Karrier ST225/75R15 Radial Trailer Tire # AM10303 are going to be our best trailer tires in your size, but the way you are going through tires I believe that there is something else causing the problem and not the tires. Often times is the axles get bent or the mounts are not aligned properly these issues will lead to the tires overheating and having blow outs. Depending on your trailer setup we may have something to help you with the axle alignment. Remember that a axles will often...
view full answer... - Lift Kit for 5th Wheel Trailer Towing Nose HighI do have an option to lift the trailer and you're on the right path as this would indeed be the solution for towing nose high with the adjustments already made to the pin box and fifth wheel hitch. The lift kit you will need to use is the Correct Track Trailer Alignment and Lift Kit part # LC87120 which provides up to 2-1/4".
view full answer... - How to Lift a 2021 Forest River Flagstaff 206LTD
I have a 2021 forest River Flagstaff MacI do have an option for you but the lift block kits you're referencing are for torsion axles and won't work for leaf spring axles. Instead, I recommend the Correct Track Trailer Alignment and Lift Kit part # LC87120 which will provide a 1-1/4" or 2-1/4" lift. It will also work to correct a misaligned axle if present. The only option for more height is an axle flip kit like the Dexter Trailer Springs Over-Under Conversion Kit part # K71-384-00 which fits 2-3/8" diameter axles. This kit will...
view full answer... - Lift Kit that Fits Gatormade Gooseneck TrailerCorrect Track makes lift kit for leaf spring suspension trailers like what your gooseneck trailer has which would work great and give you a lift of up to 2-1/4 inch. For a tandem axle you'd want the part # RR23QX, for a single axle # LC87120, and for a triple axle # RR55QX.
view full answer... - Recommended Solution to Lift Tandem Axle 5th Wheel That Is Nose HighI can't really say that it's "better" to go with one over the other when it comes to using the Correct Track Trailer Alignment and Lift Kit - Single Axle # LC87120 over a Dexter Over/Under Conversion # K71-384-00 as they both will do the same basic job in different manners. However, Correct Track Trailer Alignment and Lift Kit - Single Axle # LC87120 is what I recommend because it also works to keep your axles aligned properly to help ensure even tire wear and proper tracking behind the...
view full answer... - How To Confirm Fit of Lippert Components Tandem Axle Lift KitThe lift kit I recommend for a Jayco Eagle 321RSTS is the Correct Track Trailer Alignment and Lift Kit part # LC87120 which will extend the hangers to provide up to a 2-1/4" lift. It can also help correct misaligned axles. The other option is an over/under kit like part # K71-384-00 or part # K71-385-00. This is assuming the trailer axles are not already flipped.
view full answer... - Lift Kit for 5th Wheel Trailer so that It Can Be Towed LevelWhat you'll want to do is lift the trailer suspension so that it can sit level again. For a tandem axle trailer you would want the part # RR23QX, triple axle # RR55QX, and single axle # LC87120. These kits can lift the suspension 2-1/4 inches or 1-1/4 inches.
view full answer... - Lift Solution for 2013 Jayco Jay Flight SLX Single Axle TrailerFor a single axle trailer the easiest lift solution would be the Correct Track part # LC87120 which would give you a lift of up to 2-1/4 inches like you are needing to prevent scraping.
view full answer... - Trailer Lift Kit for a 2005 Forest River Shamrock Hybrid 17The correct lift kit is going to depend on what axle you have, which is not a fitguided item. We have a couple lift kits with 3.5" of lift. The Axle Riser Kit - Single Square Torsion Axle # LC382741 which is for square 3,500 lb. axles or the Axle Riser Kit - Single Diamond Torsion Axle # LC270682 which is for Diamond 3,500 lb. axles. There are also over under kits, which basically flip your leaf springs to the top of your axle which lifts the trailer. There are two options here as well....
view full answer...
- Recommendations For Increasing Fender Clearance With Larger Tires On a Single Axle Boat TrailerThe simplest option would be to install the Correct Track Trailer Alignment and Lift Kit # LC87120 on your trailer. This will allow you to raise the trailer frame from the axle 1-1/4" or 2-1/4". It will also allow you to shift the axle so it is centered on your fender rather than being so close to the frame bracket on the front of your fender. Otherwise you will need to cut off the welded brackets you have on your trailer for lager Fenders # CE19503-2 and have the brackets welded back...
view full answer...
- 2 inch Lift Kit for Trailer with Axle Over Springs SetupThe Correct Track lift kits can give you a lift of up to 2-1/4 inches. So for a single axle trailer like yours you'd want the Correct Track Trailer Alignment and Lift Kit # LC87120 and you'd be set. This lift works on axles with over or under slung axles so it will work great on your current trailer setup.
view full answer... - What is the Difference Between the Correct Track Trailer Alignment Kit LC87120 and RR23QXThe difference between the Correct Track Trailer Alignment and Lift Kit # LC87120 and the Correct Track Trailer Alignment and Lift Kit # RR23QX is that the # LC87120 is for a single axle trailer and the # RR23QX is for a tandem axle trailer. Since your 2018 Jayco Eagle is a tandem axle trailer you would want to use the # RR23QX tandem axle kit. The # RR23QX will contain all the additional parts needed for a tandem axle application.
view full answer... - Options for Lifting a Triple Axle Trailer with Over Slung AxlesFrom what I could find on the 2010 Keystone Fuzion Toy Hauler 405, it has 7,000 lb. ez lube triple axles that are already flipped. Given that information, the only thing that we would have is the Correct Track Trailer Alignment and Lift Kit # LC87120 (you would need one kit for each axle). This will provide you with 2-1/4" of lift. You can try lowering the pin box to try and make up the other 2" you are needing, but it sounds like you may be dealing with a lifted truck which can often...
view full answer... - Comparing Correct Track Trailer Alignment and Lift Kit and Lippert Components Standard Axle Lift KitThe Correct Track Trailer Alignment and Lift Kit part # LC87120 when compared to the Lippert Components Standard Axle Lift Kit part # LC425750 offers more lift, adjustable lift, and axle alignment correction so that is what I recommend.
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Video Edited:
Zack K
Installed by:
Jeff D
Installed by:
Kathleen M
Expert Research:
Jameson C
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Jerry B
Updated by:
Manda E
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.