Recommendations For Increasing Fender Clearance With Larger Tires On a Single Axle Boat Trailer
Question:
I had to purchase new tires for my boat trailer. Since ST155/80R13s are no longer made I had to buy ST175/80R13s. Now the tires rub on the plastic fender and there is little to no clearance on the front metal bracket. Any suggestions?
asked by: Alan B
Helpful Expert Reply:
The simplest option would be to install the Correct Track Trailer Alignment and Lift Kit # LC87120 on your trailer. This will allow you to raise the trailer frame from the axle 1-1/4" or 2-1/4". It will also allow you to shift the axle so it is centered on your fender rather than being so close to the frame bracket on the front of your fender.
Otherwise you will need to cut off the welded brackets you have on your trailer for lager Fenders # CE19503-2 and have the brackets welded back on in the correct position.
Products Referenced in This Question
CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Trailer Fenders
- Top and Side Step
- 13 Inch Wheels
- 10 Inch Wide
- 40 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- CE Smith
more information >
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Single Axle
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19503-2 Review
- Q&A: Boat Fender Replacement Recommendation for Black Fender and 13" Wheels
- Shop: Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)
- Q&A: Mounting Hole Dimensions of CE Smith 12" and 13" Plastic Single Axle Fenders
- Shop: CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
- Article: Trailer Wiring Diagrams
- Q&A: Plastic Trailer Fender with Bracket Dimensions of Inner 30 inch and Outer 34
- Search Results: tie~down anchors
- Search Results: ratchet straps
- Shop: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 1
- Q&A: CE Smith Single Axle Trailer Fenders CE19503 Mounting Dimensions
- Q&A: Replacement Fenders Needed for a 13" Wheel on a Tracker Trailstar Boat Trailer
- Video: Optronics Lights Mounting Bracket Installation
- Search Results: fender bracket
- Search Results: wheel spacer
- Video: CargoSmart Tie Down Anchors - Trailer Tie-Down Anchors - 3481763 Review
- Video: CargoSmart Tie Down Anchors - Trailer Tie-Down Anchors - 3481765 Review
- Video: CargoSmart D-Ring Tie-Down Anchor Review
- Video: Erickson Ratchet Tie Down Straps with Web Clamps Review
- Shop: Fulton Single Axle Trailer Fenders w Top and Side Steps - Silver Plastic - 14" Wheels - Qty 2
- Q&A: Recommended Replacement Fenders for a Bass Tracker Boat Trailer With 13" Wheels
- Shop: CE Smith U-Bolt - Galvanized - 4-13/16" Long x 2-1/16" Wide x 1/2" Diameter - Qty 1
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Q&A: Can I Replace 155/80R13 Tires with 175/80 R13 Tires on a Boat Trailer
- Search Results: 13 inch trailer fenders
- Search Results: trailer tires
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review
- Search Results: fender for trailer
- Shop: Transmission Cooler