Recommended Option To Add At Least 2 Inches Of Lift To A 2017 Heartland North Trail 32RETS Trailer
Question:
Hello I have a 2017 Heartland North Trail 32RETS with a front frame. I need to raise it trailer about 2. I was looking at the MORyde kit for the spread axels but that would only give me about 3/4. Taller tires and wheels are out as I dont have the room. So, what would you suggest? Thank you
asked by: Keith E
Expert Reply:
To get the amount of lift you want and having tandem axles, you will need QTY.3 of the Correct Track Trailer Alignment and Lift Kit # LC87120. This will cover all 6 hangers and will give you 1-1/4" or 2-1/4" of lift. In combination with the MORryde # MR34AR kit giving you 3/4" of lift already, you will have 3" of lift when all is said and done.
Products Referenced in This Question
Correct Track Trailer Alignment and Lift Kit - Single Axle
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- RV Ride Control
more information >
MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Trailer Leaf Spring Suspension
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 14-3/4 Inch Long
- Tandem Axle
- MORryde
more information >
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Trailer Leaf Spring Suspension
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: What Is The Optimum Angle For Shackle Straps To Sit At On The Equalizer
- Q&A: Upgraded Equalizer and Replacement Leaf Springs for 2020 Grand Design Transcend 27BHS
- Q&A: Can 3,500 lb Trailer Axle Springs be Replaced with 4,500 lb to Prevent Sagging
- Q&A: Effect of Installing Shorter Shackle Straps on Trailer with Axle Over-Under Kit
- Q&A: Can Hitch Ball Be Changed To A Different Size on Curt Weight Distribution System
- Q&A: What is Bolt Hole Diameter for Suspension Hanger # E4139
- Q&A: Can 4" Tall Equalizer Be Used To Replace 3" Tall Equalizer?
- Article: Trailer Tire Sizing
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Trailer Wiring Diagrams