bing tracking image
  1. Folding Trailer Tongue
  2. Fulton
  3. Coupler Hinge Kit
  4. 2 x 3 Inch Tongue
  5. 5000 lbs GTW
  6. Bolt-On
Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs

Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs

Item # FHDPB230101
Retail:$220.54
Our Price: $154.41
You Save: $66.13
Folding Trailer Tongue
Shipping Weight: 9 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Use with actuators or standard couplers to create a foldaway tongue up to 48" long so that your trailer can be stored in even the smallest garage. Unique offset design guarantees superior performance. 1-800-940-8924 to order Fulton folding trailer tongue part number FHDPB230101 or order online at etrailer.com. Free expert support on all Fulton products. Great prices and Fastest Shipping for Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs. Folding Trailer Tongue reviews from real customers.
  • All Info
  • Reviews (902)
  • Q & A (0)
  • Photos

Fulton Folding Trailer Tongue - FHDPB230101

  • Coupler Hinge Kit
  • 2 x 3 Inch Tongue
  • Fulton
  • 5000 lbs GTW
  • Bolt-On
  • Up to 48 Inch Long

Use with actuators or standard couplers to create a foldaway tongue up to 48" long so that your trailer can be stored in even the smallest garage. Unique offset design guarantees superior performance.


Features:

  • Hinge kit lets you create up to a 48" foldaway tongue for your trailer
    • Designed to be used with actuators or standard couplers
  • Bolt-on installation
  • Sturdy steel construction
  • Corrosion-resistant, Z-max 600 zinc finish
  • Mounting hardware, pivot bolt and pivot pin and clip included
  • Not for use on aluminum trailer frames


Specs:

  • Application: 2" x 3" trailer tongue
    • Trailer tongue material thickness must be between.188" and.120"
  • Capacity: up to 5,000 lbs (see table)
  • 5-Year limited warranty


Use the table below to determine your maximum pivot length based on your trailer capacity. Pivot length is the measurement from the center line of the coupler ball to the farthest pivot hole.

Pivot

Hinge Kit Maximum Pivot Table

HDPB230101 Fulton High Performance Bolt-On, Fold-Away Hinge Kit for 2" x 3" Trailer Tongue

Installation Details FHDPB230101 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs - FHDPB230101

Average Customer Rating:  4.8 out of 5 stars   (902 Customer Reviews)

Use with actuators or standard couplers to create a foldaway tongue up to 48" long so that your trailer can be stored in even the smallest garage. Unique offset design guarantees superior performance.

by:

The fold-away coupler works flawlessly. It was the perfect solution for a too long trailer tongue. The installation was easy and all the necessary parts were included and instructions were clear and understandable. Highly recommend this problem solver to anyone who needs to gain room in any storage situation.

Wink

5/10/2024

Functions flawlessly. The space in the small garage was difficult to easily access because the trailer tongue was too long. Now there is room to walk around and manuver the trailer.



by:

This Fulton swing away tongue fit perfectly once I got all the parts. The package was missing the shoulder bolts because the box was damaged in shipping. etrailer got me the bolts quickly. I am pleased with this order.

Richard

11/6/2023

This folding hitch extension worked perfectly for what I needed. I needed the extra length to be able to launch my boat from shore without getting my truck tires stuck in the mud. Worked great.



by:

Easy install when you have the correct tools. Good drill bits are a must.

Michael

11/1/2023

Works great and does what I want it to do.



by:

Bought the hinge coupler to extend the length of my utility trailer so I can convert it into a kayak trailer. Works great! I especially love the way I can fold it and it fits in my garage.

The product was delivered on time. I have been using the hinge coupler for a year now. It was a perfect purchase for me. My fishing buddies want one now!



by:

Unfortunately took months to get it from the time I ordered but once it arrived I liked it. Fairly easy to install and works great. Getting the nuts and a wrench inside the tube was a little tricky for the size of tube and nuts, no fault of seller/manuf just a reality of the small tube size. Held up so far to use.

Forrest

3/28/2024

After a year and use on a monthly basis its holding up great that I can tell. Very glad I made the mod as it has made it storing in my garage way smaller.



by:

The installation went exactly as expected.
I
have been using and enjoying this trailer tounge hinge for a year now with zero issues or concerns.



by: 11/02/2022

It was extremely easy to install on my 5x8 utility trailer after watching the installation video. My only suggestion is new or quality drill bits. I tried sneaking up on the hole with progressively larger bits but broke two in the process. I ended up using a high quality 1/2" bit. My install did not allow for placing the tongue jack behind the hinge because I wanted maximum swing so I installed the stabilizer jack that etrailer sells to support the trailer when the tongue is swung away. I can now store the trailer more easily in a smaller spot.



by:

Fulton Fold-Away Coupler Hinge bolted on square and easily. Holds the weight of my boat very well and allows the boat to be stowed in my garage now. I did notice that the coupler flexes a bit, but does not interfere with the overall towing of the trailer.

I'm very happy with how this item mounted and it's performance. Good quality from Fulton.

Erich B.

2/20/2019

After one year, this product is still great. Cutting down some of the tongue from my DB trailer made it wobble from side to side at speeds of over 65 mph, but once I re-mounted my spare tire and went to the recommended 10-12 of total weight at tongue weight, problem solved. Again, I only had that problem because I removed a big section of the tongue to make it a proper folding tongue.



by:

This is a high-quality item that worked as advertised. Easy to install and works well



by:

this is the second one I have bought and installed on my trailers. They save space and work well,



by:

This hinge kit installation went on without any problems except the plastic bag that hardware came in had been opened. One torque bolt and one rubber bumper was missing. I contacted etrailer, they sent replacement items within 10 days. I completed the install in an hour of receiving parts.
I liked the customer service and love the hinge function.



by:

Fits well, easy to install, hinge is ad justable

Brad

8/16/2023

The Fulton Folding tongue has held up well despite the abuse I have thrown at it. I use the trailer about twice a week and have dragged the tongue over rocks and threw deep mud. Rinse and repeat. The tongue has never needed any sort of adjustment after install. I have used the tongue as a seat, standing platform, lever point, workbench, and at times a small anvil. I have no problem recommending this product.



by:

Great product. Excellent seller. Installed on 2022 Continental GT1612 trailer, 38" cut. NOTE: As described in product description, it doesn't come with the extra safety chains or bolts.



by:

I just completed the installation of the Fulton Fold-away Coupler Hinge Kit on my Malone Megasport kayak trailer. The trailer and kayak racks were also purchased from etrailer. The trailer is great but it barely fit in my garage. My solution was to change out the crossbars from 86” to 78” and install the Fulton hinge kit. I was not fast but I have learned to measure twice and cut once. The installation was relatively easy and straightforward and the instructions easy to follow. I am glad I made the purchase!



by:

This coupler did exactly what I needed it to. I have a 17ft Pro Angler kayak and the trailer was a bit too short. I wanted to mount a small winch to ease loading after a long day on the water, but just didn't have the room on the existing trailer tongue. I used the maximum length extension for my application (4ft) and could not be happier with the results. Installation was pretty simple... just make sure you have a good carbide bit to drill through your galvanized steel. I wasted a lot of time using an inferior 1/2 inch finishing bit which just burned up. I went to Home Depot and got a good carbide bit and it went through like butter... no issues. Just think about your wiring and all that ahead of time and make sure you have what you need. Great product so far.



by:

Just completed installation of trailer tongue hinge and could not be more pleased with the result. This saved 3ft off orig trailer length and allows boat to now easily fit in the garage - just in time for winter. Installation went smoothly - the instructions and on-site vids were extremely helpful in avoiding issues. I'd caution anyone to take heed of the safety cautions - esp. eye protection - when cutting and drilling. Results were fantastic. Hinge is a high quality, solid product - extremely pleased. Item shipped and arrived early, customer service is first rate and I will def be ordering from etrailer again. Highly recommend.



by:

I keep my boat in the garage which made for a tight fit to get into the house. I came across the Fold-Away Coupler Hinge Kit. - ordered it and installed it this weekend. The installation was much easier than I expected. Great communication from the folks at etrailer.com

Now the boat fits with more space to move around in the garage.
My wife is happy - so I am happy!
Great product!
Photo attached - I just have to move the chains so they connect behind the coupler.



by:

Excellent fast shipping. Product arrived quickly and as described!



by:

The directions were very good and easy to fallow. I got all the tools ready per the directions and quickly got each step done. The only thing I have left to do is lengthen and remount the safety chains.



by:

Great product, follow the instructions and you will glide right through the installation process. Finally can park the boat inside, no more boat covers!



by:

I purchased this to help with my storage space needs. Great quality with top notch hardware. Easy to install with clear instructions. Very happy with this purchase.



by:

Good communication and customer support people. The product is well-built and sound in every aspect. The assembly directions are clear and concise, and the inclusion of the center punch and torque bit tools was both a surprise and a great help. Overall, I will not hesitate to do business with your firm again, and highly recommend it for good quality products and customer satisfaction.



by:

Thank you,
Great product and fast delivery
as well...
Your product looks and feels like excellent quality.... instructions and accompanying tools were excellent and help make the job a lot easier....
Thanks again



by:

I feel I am the victim of false for. The on line ad under "Fulton Folding Trailer Tongue-FemHDPB230101" listed six items. The sixth item was the "36 inch Fold-Away Tongue". I purchased the kit
for a total of $XXX which included a "Shipping Ground"fee of $XXX. The kit arrived without the 36 inch tongue. The first person I spoke to (Kate)saw the same ad; expressed her sympathy but after consulting with her supervisor explained that the 36 inch tongue had been discontinued and the only alternative was to return all of the items and that I would be refunded. I then spoke to Samantha who tried to to say that the ad was replaced. I argued that even as we spoke, the ad was still present
and online. Samantha offered again to refund me but having already opened the box and breaking the plastic bags I just did not feel like returning the items and having to start all over again. I should point out that the 36 inch tongue was a major incentive plus what I thought would be free shipping or close as it was over $XX. Samantha did credit me $XX but it really wasn't close the what I spent having to purchase a tongue from another company for $XXX. etrailer.com made no effort to inform me that the 36 inch tongue had been discontinued. No credibility whatsoever.

Etrailer Expert

Jenny N.

9/21/2022

I sincerely apologize for any confusion that the product description may have caused. It has since then been corrected. This kit allows a person to create a foldaway tongue up to 48 inches long however it does not come with a trailer tongue. The reason shipping was applied to the order was because it was shipped to Hawaii and we are only able to offer free shipping over 99 dollars to the lower 48 states.



by:

Easy to install,makes trailer smaller foot print for storage


25
900
Show More Reviews

See what our Experts say about this Fulton Folding Trailer Tongue

  • Dimensions of Fulton Fold-Away Coupler Hinge Rubber Plug Kit
    We were able to find out the dimensions for you of the Fulton Fold-Away Coupler Hinge Rubber Plug Kit # F500705. Using digital calipers it measured 0.423 inches tall and its round base has a diameter that measured 0.426". These are designed to replace the rubber dampener plugs for the Fulton Fold-Away couplers: - Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt On - Up to 5,000 lbs # FHDPB230101 - Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Tongue - Weld On - Up...
    view full answer...
  • Installation Instructions for the Fulton Fold-Away Coupler # FHDPB230101
    The Fulton Fold-Away Hinge Kit, item # FHDPB230101, is designed for bolt-on installation. If you need a weld on kit, you would use the Fulton Fold-Away Coupler Hinge Kit, Weld On, item # FHDPW230300, for your application. To install either of these foldaway kits you will need to cut the trailer tongue at the desired pivot point, up to 36 inches see table below, and then attach the two sides of the fold away to the cut ends of the trailer tongue. Be careful not to damage any wiring or...
    view full answer...
  • Fold-Away Coupler Hinge For 2x3 Trailer Tongue
    I recommend using the Fulton Fold-Away Coupler Hinge kit part # FHDPB230101 that fits a 2"x3" trailer tongue. It comes with all the hardware needed to install. Please keep in mind the trailer tongue material thickness must be between.188" and.120" to use this product. I have attached a diagram that explains where to install the fold-away and a video for your reference.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Fold-Away Coupler Hinge Kit for a 2 Inch Trailer Coupler
    I have solution for you but we do not have any folding coupler hinges for a 2" x 2" coupler. You can weld 1/2" plates to the top and bottom of the coupler and use either the Bolt On Fold-Away Coupler Hinge Kit item # FHDPB230101 or Weld On item # FHDPW230300. Both of this kits are rated for up to a 5,000 lbs trailer. I have linked an installation video below.
    view full answer...
  • Bolt On Fold Away Coupler Hinge Kit For Malone MegaSport Trailer
    The Malone MegaSport Kayak Trailer # MPG535 use 11 gauge(0.120") 2" x 3" steel for the trailer tongue. You will be able to use the Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 as it requires a thickness of 0.120" to 0.188" thick steel. You will need to drill the holes for the
    view full answer...
  • Can a Coupler Hinge be Used on a Boat Trailer with Hydraulic Surge Brakes
    The Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 can be used on a trailer with a surge brake actuator. You will need a flexible brake line like # T0776500 if you don't already have one.
    view full answer...
  • Fold-Away Coupler for the Malone MegaSport Kayak Trailer Part # MPG535
    If you are referring to the Malone MegaSport Kayak Trailer part # MPG535 then the correct fold-away is the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101. If this is not the trailer you are referring to then please let me know what the height and width of the tongue on the trailer is.
    view full answer...
  • Can Fulton Coupler Hinge Kits Fold Up Instead of to the Side
    I might have a solution for you, but the Fulton Fold-Away Coupler Hinge Kit, # FHDPB230101, was designed to be mounted to where the tongue will fold to the side. Mounting the hinge kit to where the tongue would fold up provides no lateral stability and should not be used in this way. It sounds like your trailer frame is 3 inches wide and 2 inches tall. What you could use instead would be the 3 inch by 3 inch hinge kit part # FHDPB330301 and then use a spacer on your trailer frame so that...
    view full answer...
  • Why Is Trailer Wall Thickness limited When Installing Fulton Fold-Away Coupler Hinge Kit FHDPB230101
    The reason the wall thickness is listed for the Fulton Fold-Away Coupler Hinge Kit, part # FHDPB230101, is because the Torx bolts included in the kit are a certain length and the nuts may not catch the threads when installing the hitch due to the 1/4 inch thickness of your trailer walls. I called my contact at Fulton and you can replace the fasteners with a greade 5 fastener if you choose. But you may want to wait and see if that is needed before buying replacement hardware. I do have another...
    view full answer...
  • Compatibility of Fulton FHDPB230101 Fold-Away Hinge Kit with Malone MPG596XV2 LowMax Trailer
    Your Malone MPG596XV2 Malone LowMax XtraLight Trailer has a removable tongue that's pretty easy to install and remove for storing the trailer in a garage or other tight spaces which would tend to make a hinge kit unnecessary. This being said, the trailer has a tongue that is constructed of 3 x 2 inch galvanized steel tubing, so it would indeed be compatible with the Fulton # FHDPB230101 bolt-on fold away hinge kit you'd mentioned. I've linked to a demonstration video featuring the fold...
    view full answer...
  • Can Fulton Trailer Tongue Hinge Kit # FHDPB230101 be Used to Make a Swinging Bike Rack
    I do not recommend using the Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 to create a swing away bike rack. The first issue is that the opening size on the hinge is too tall which even if you used spacers would still introduce too many points of potential failure. And the second issue is the bike rack would have to have a really, really long shank for the rack to swing off to the side far enough to open the rear door on your Jeep. Like you said there are products that are ideal for...
    view full answer...
  • Can Fulton 3X3 Fold Away Coupler # FHDPB230101 Be Installed on Car Dolly to Fold Upwards
    At first glance, the idea you propose seemed like a good idea. However, when the Fulton 3x3 Folding coupler was designed, it was engineered to sustain up and down bouncing forces when installed as intended, so the coupler swings to the side. If it's installed as you mentioned, the tongue weight and bouncing forces will be applied to the folding coupler in a manner that the coupler wasn't designed to withstand. This very well could cause the coupler to fail at the hinge point. Fulton only...
    view full answer...
  • How to Install the Fulton Fold-Away Hinge Kit, # FHDPB230101 for 2 Inch by 3 Inch Tongues
    To install the Fulton Fold-Away Hinge Kit, # FHDPB230101, you would need to cut the tongue at the point you want it to pivot. Then, slide the two sides of the hinge over the newly cut ends of the tongue. They slide on about 3 inches on each side. To find the maximum pivot length for your trailer, use the table at the bottom of the product page for Fulton Fold-Away Hinge Kit, # FHDPB230101.
    view full answer...
  • Will the Fulton Fold-Away Coupler Hinge Kit Fit a 2" x 2-3/4" Frame
    Yes, the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101 will work on a 2" x 2-3/4" frame but you will need to install spacers in order to fill the 1/4" gap or 1/8" on each side. I suggest some flat metal washers for this.
    view full answer...
  • Availability of Hinge Kit for Trailer To Allow Tongue to Pivot Out When Needed
    We have hinge kits like it sounds like you are looking for like the Fulton part # FHDPB230101. Basically you attach either side of your trailer frame into the assembly and you can pivot out when needed and folded when you want to store it. This hinge kit is designed for frames that measure 2 inch by 3 inch so you'd need to make sure that's what size you have. If you have something different let me know and I'll see if we have the correct size. We have a few sizes like the part # FHDPB330301...
    view full answer...
  • Fold-Away Coupler Hinge Kit For a Trailer With a 3" Wide and 2" Tall Tongue
    The Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 is for a trailer tongue 2" wide by 3" tall. having a trailer tongue which is wider than it is tall is very strange. You can use the Fulton Fold-Away Coupler Hinge Kit # FHDPW330300 but will need to add the additional material needed to bring the tongue up to the 3" x 3" this hinge is designed for.
    view full answer...
  • Fold-Away Hinge Kit for a Trailer with 2 inch By 3 Inch Tongue
    We do have a fold away coupler that will work on your trailer tongue that is 2 inches by 3 inches and that is the Fulton # FHDPB230101. This coupler will install on your trailer tongue and has a cacity of up to 5,000 pounds. Please note that the tongue material thickness must be between 0.188 and 0.120 inches for installation purposes. The fold away coupler that you referenced # FHDPW330300 is intended for use on trailer tongues that are 3 inches by 3 inches and I would not recommend...
    view full answer...
  • Availability of Coupler Hinge Kit for Trailer Coupler with 2 inch by 3 inch
    Yes we do have hinge kits that fit 2 inch by 3 inch inch trailer couplers with the part # FHDPB230101 for a bolt on setup or the part # FHDPW230300 for a weld on setup.
    view full answer...
  • Folding Hinge for 2 x 2 Inch Trailer Tongue
    Unfortunately, Fulton doesn't offer a a folding coupler hinge kit for a 2 x 2 inch trailer tongue. I have heard from some of our customers that they've used a couple of pieces of 1/2 inch steel plate plate cut to the appropriate size to shim out one side of the 2 x 2 trailer tongue so a hinge for a 2 x 3 hinge kit like the # FHDPW230300 weld-on or # FHDPB230101 bolt-on hinge can be used.
    view full answer...
  • Will Fulton Fold-Away Coupler Hinge Kit Work on Aluminum Frame Trailer
    I do have an option for you but the fold-away trailer tongue adapters we offer cannot be used on trailers with an aluminum tongue. The adapter is steel so mating this to an aluminum tongue could cause galvanic corrosion and there is also concerns with strength. That said, many aluminum frame trailers have a steel tongue so if this is what you have or you can convert the trailer to this you'll be able to use one of the Fulton Fold-Away Coupler Hinge Kit listed below. - 2" x 3" Trailer...
    view full answer...
  • Adapting a Fulton Fold Away Bolt On Hinge Kit to Fit on a 2 1/2" Tongue
    Yes, the Fulton Fold Away Bolt On Hinge Kit item # FHDPB230101 will work for your trailer. According to Fulton you will need to fabricate a metal or steel spacer as a shim to fill the gap between the tongue and the hinge.
    view full answer...
  • Are There Replacement Bushings for Fold-Away Coupler Hinge Kits
    I cannot speak for all fold-away coupler hinge kits but the ones we offer, the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101, part # FHDPB330301, and part # FHDPB350101 do not contain any bushings. It can be rather difficult to just look at a bolt or hinge pin and determine whether or not it has stretched or deformed but I would be willing to bet that is the issue you are having. The loose connection between these bolts and pins is a rather serious safety issue so I highly recommend...
    view full answer...
  • Fulton Fold-Away Hinge Kit for Malone Trailer MAL63FR
    Since the tongue of the Malone trailer part # MAL63FR is 2 inch by 3 inch you could install the Fulton hinge kit part # FHDPB230101.
    view full answer...
  • How to Install a Fold-Away Coupler Hinge Kit on a Trailer with Surge Brakes
    In order to install a Fulton Fold-Away Coupler Hinge Kit like part # FHDPB230101 on a trailer with surge brakes you are going to want to use a flexible brake line that runs from the actuator to the t-fitting just before it splits to each braking assembly. This hose can been seen as letter A in the attached photo. The hose can actually be ran through the frame rail you will just need to make sure you have enough slack so it does not put too much tension on the line when the tongue is in...
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Folding Trailer Tongue?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C
Employee Conner L
Installed by:
Conner L
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Laura H
Updated by:
Laura H
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.