Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long.
Features:
Specs:
Coupler Specs:
Tire and Wheel Specs:
Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.
This heavy-duty, low-profile trailer with 78" crossbars has extensive space to mount accessories like watersport carriers, bike racks, a fishing rod carrier, or a cargo box (sold separately). Because of the trailer's low-profile design, the crossbars sit only 22" off the ground. The lower crossbars provide a safe height to load heavy kayaks and help avoid unnecessary overhead lifting.
With a 7-1/2' tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.
The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.
The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.
Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.
When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.
This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.
Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.
Average Customer Rating: 4.3 out of 5 stars (10 Customer Reviews)
Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long.
This trailer is a rock star. Loading/unloading our kayaks has never been easier. We added some SeaWing kayak carriers to this trailer and they absolutely keep the kayaks secure. We tow this behind our Honda HRV all over the great State of WA without issue. So rather than struggle with loading/unloading your kayak(s) from the roof of your car, buy this trailer. It makes life a helluva lot easier Yes, you need to assemble it, but the video is crystal clear with good directions.
We bought everything from e-trailer.com for this:
The trailer hitch mount, 2” ball assembly, wiring harness, SeaWing carriers, storage box, etc….
Great versatile trailer! Easy to tow my kayaks or two 17 foot aluminum canoes, with my Subaru Forester. Trailer can easily be moved around manually, and I was able to put it together in a few hours with the supplied directions. A great product from a great dealer.
This is the best purcchase I could have made.I'm only sorry I didn't do it sooner. I was worried that the crossbars would be to wide but they are not. I'm in my 60s and only 5ft tall so getting a kayak on the roof of my car just isn't happening(all the dents and sractches). If you have any thoughts about bying this just do it.
No issues with the trailer and I put it together without help (not bad for a 5’0 woman). Now if I could just learn to back it into the launch lol.
Great trailer for the price I paid and easy to assembly.
Do you have a question about this Kayak Trailer?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
8/10/2023
Why the blank face? If you have any questions or concerns please reach out to me.