Demco 2-Tang Clevis - Adjustable Channel Mount - Primed - 10,000 lbs

Video Transcript for Review of Demco Clevis Hitch - Clevis Adapter - DM05593-97

Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this Stemco 2-Tang Clevis attachment for an adjustable channel mount. Has a nice primed finish and a 10,000 pound gross towing weight capacity. Now this two-tang clevis attachment can be used as a connection point for a lunette ring or as a ball mount for standard towing. The two-tang clevis is designed to couple with a lunette ring. Your lunette ring would go right in there and your clevis pin would dropped through there.

Now the clevis pin we do not, is not included. We do saw that separately. The hole diameter that the clevis pin would go through is seven-eighths of an inch and just to give you the height, what you would want as far as the length on your clevis pin. So if we measure the height from the bottom to the very top it's three and three eighths inches height. And as we mentioned, this platform right up here with the seven-eighths inch hole can be used also as a ball mount.

If you put a ball mount through here and attach it you could use it for standard towing. This is designed to fit into an adjustable channel mount that is three inches wide and that way you can slide it up or down, put your pins in here and change the height of the clevis depending on the application. Now the channel mount and the hardware is sold separately. As we mentioned, it fits into a three-inch wide channel mount which will have the pinhole distance center to center of two inches. This is a nice sturdy steel construction.

You can see it has a nice primed finish on it. This part is made in the USA. A few specs on this: again fits three-inch-wide channel bracket and has a weight capacity of 10,000 pounds. But that should do it for the review on the Stemco two-tang clevis attachment for the adjustable channel mount.