Which Ball Mounts/Accessories Fit Demco Hydraulic Brake Actuator with Adjustable Channel

Question

Question:

What ball receivers or couplers will bolt to this?

asked by: Brian

0

Expert Reply:

The bracket on the end of Demco actuator # DM8759933 is 3 inches wide so you would need to look at accessories that mount to a 3 inch wide or 2-7/8 inch wide opening such as Pro Series coupler # PSA200S0303 or Bulldog coupler # BDA200C0317. These are rated for 8,000 pounds to match the Demco actuator.

I have also included a link to all of the channel mount couplers you could use.

You can also use lunette ring # DM09557-95, 2-tang clevis # DM05593-97, and pintle/ball hitch # C45920 which you normally would not see on the trailer side.

For mounting hardware you can use # PS024202.

expert reply by: Michael H

0

Answer 1

The outer eye diameter of the Buyers Products 10-Ton Lunette Ring w/ 3" I.D. #337B16140 is 6-1/4". The mounting holes for the 5/8" hardware is space 2" on center. I have included an image with these measurements.

view full answer...

Answer 2

When using a Pintle Ball combination hitch like the #PH1 , a certain amount of slack is inevitable because the opening is much larger than if you were using a standard pintle hitch. If you're not already using the 2-5/16" hitch ball,…

view full answer...

Answer 3

The internal width of the Titan Lunette Ring w/ 3-Position Adjustable Channel - 3" Diameter - Raw - 21,000 lbs #T1812800 channel is 3 inches. The channel is #T0897800 and I've attached videos to show this. The Titan Trailer Coupler -…

view full answer...

Answer 4

The depth of the Titan 3-Position Adjustable Channel Bracket #T0897800 is 2-1/8 inches, which is the standard for these channels and the same, for example, of the Buyers Products 3-Position Channel #337B8978. If you need a coupler you can use the…

view full answer...

Answer 5

The Demco Lunette Ring #DM09557-81 is approximately 3" wide and the holes are 1" apart center on center. This lunette ring fits in channel mounts like the Demco 6-Hole Adjustable Channel Bracket #DM59602.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Which Ball Mounts/Accessories Fit Demco Hydraulic Brake Actuator with Adjustable Channel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching