Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered - 2,700 lbs
(129 reviews)
Price: $570.58
In Stock
Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered - 2,700 lbs
Item # DL24876
Retail:$764.48
Our Price: $570.58
You Save: $193.90
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (129)
- Q & A (0)
- Photos
Dutton-Lainson Electric Winch - DL24876
- AC Winch
- 2001 - 4000 lbs
- Wire Rope
- No Remote
- Dutton-Lainson
- Slow - 0 to 4 fpm
- 31 - 40 lbs
- Spur Gear
This winch includes a 50' cable that increases the load capacity with double-line-pulling capability. Winch works anywhere AC power is available and includes a Load/Unload switch and a spring-loaded clutch for releasing cargo without power.
Features:
- Load/Unload, 3-position power switch
- Automatically returns to "Off" position when released
- Spring-loaded clutch lever for releasing load without power
- Provides smooth load control from locked or freewheel position
- Automatically returns to locked position when released
- Freewheel option allows cable to be removed by hand
- Provides smooth load control from locked or freewheel position
- Mechanical friction brake
- 120-Volt, AC operation
- 10', 3-Wire grounded power cord
- Flexible, high-strength, 7 strand x 19 gauge, galvanized aircraft cable
- Pulley block and snap hook included for double-line pulling
- 50' of Cable - great for double-line operation
- Safety snap hook keeps load securely attached
- Wire cable can be swapped out for 2" wide strap with wider face plate (DL404495) sold separately
- Emergency crank handle comes standard
- Use in the event of power failure
- Heat-treated gears provide smoother, quieter ride and greater strength
- Precision needle bearings in high-load areas
- Create low friction and promote longer life
- Die-formed base is adapted for quick-mounting applications
- High-impact, weather-resistant case
- Provides excellent protection for internal components
- Safer than open-reel models
- Brushed stainless steel front plate for superior rust resistance
- Made in the USA
Specs:
- Load capacity: 2,700 lbs
- Double-line capacity: 4,000 lbs
- Rating based on 10' pull
- Current draw: 6 amps at 120 volts
- Electric winches should be used intermittently - maximum continuous run time is 4 minutes
- Gear ratio: 570:1
- Cable dimensions: 7/32" diameter x 50' long
- Load speed (feet per minute):
- No Load/Full Reel - 9
- Full Load/Full Reel - 4
- 1-Year limited warranty
Determining Your Load Capacity
A common ratio for determining your winch load capacity is 2:1. For example, a 2,000-lb boat would require a 1,100-lb winch. There are extenuating factors, however, that will determine the appropriate winch size for your purposes.
The ratio can be stretched to 3:1 in instances when the trailer in use has high-quality rollers and is most commonly used on ramps where boats float most of the way onto the trailer.
In contrast, using a boat trailer that has wooden bunks, lacks self-alignment capabilities, and is most commonly used on ramps where the boat must be winched most of the way onto the trailer reduces the ratio to 1:1.
Note that pontoon trailers and other special designs require special consideration when determining winch capacity.
| Percent Incline | Multiply By |
|---|---|
| Level Surface | 10.0 |
| 5 (3 degrees) | 6.67 |
| 10 (6 degrees) | 5.02 |
| 20 (11 degrees) | 3.40 |
| 30 (17 degrees) | 2.61 |
| 50 (26 degrees) | 1.86 |
| 70 (35 degrees) | 1.53 |
| 100 (45 degrees) | 1.29 |
Determining Your Rolling Load Capacity
To calculate your winch's rolling load capacity - the amount of weight it can pull up an incline - you must multiply the winch capacity by a factor determined by the degree of the incline.
The multiplication factor shown includes a 10 percent rolling friction factor. Note: A 5 percent - or 3 degree - incline is a 1/2' rise in 10'. Follow the chart to determine your winch's rolling load capacity.
Mounting Your Winch
Note: All Dutton-Lainson StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present.
24876 Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered - 2,700 lbs (SA12000AC)
Installation Details
Customer Reviews
Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered - 2,700 lbs - DL24876
Average Customer Rating: 4.7 out of 5 stars (129 Customer Reviews)
This winch includes a 50' cable that increases the load capacity with double-line-pulling capability. Winch works anywhere AC power is available and includes a Load/Unload switch and a spring-loaded clutch for releasing cargo without power.by: Thomas12/13/2017
Great company to buy from. Best price and very helpful people that know their products I am going to use this to put my jet ski in the river on a roller ramp
by: Jerold12/09/2022
have not tried yet
by: John 10/07/2022
by: Josh 07/22/2023
by: Matthew 10/15/2021
by: Wayne03/21/2024
Shopped around a lot before I bought this. My boat is heavy (7500 lb) and the wench I had struggled. I took a chance on this as it was rated for the weight. I used the Anderson style connectors and installed a breaker near the battery. Pulled new wire rated for the amp draw. I couldnt be happier! This thing is a beast! Has no prob pulling my boat and cant see that it struggles at all. Highly reccomend. Photo is during installation. I put a cover over it due to my anchor comes close when launching and didnt want it to hit.
by: PontoonSarah04/12/2024
They were exceptionally helpful in deciding which winch to buy. I got this for my pontoon boat on a slide bumper trailer. I wanted to make sure it would have enough power to pull my 24 ft pontoon. This winch is honestly one of the best purchases I have made for this boat. It easily pulls my boat up onto the trailer. Total time to load about 2 mins. I have had many envious looks at my electric winch. Thank you again. For the help in deciding which one to get.
by: Darren02/03/2018
Put this winch on my Ranger 620 boat trailer a year ago and love it! Haven't had a single problem and it helps trailering when I fish alone. I ran power and ground from my truck battery to a back bumper plug, and have a separate removable cable (shown in pic) to connect truck plug to the winch plug. Grounding to the truck didn't work for me. I have another spare cable and plug rolled up and attached to my trolling motor battery for when my buddies drive. Winch prevents power loading and drawing sand into the motor. DL24055 adapter plate was needed and I put a coupler lock up through the middle of the winch to prevent theft and I bought a cover (shown in pic) to keep the rain out. etrailer sales and support are absolutely fabulous! They helped me figure all this out.
by: Richard 03/23/2024
Received the winch and all looks good. I ordered a new boat trailer so the winch hasn't been installed yet. Will let you know when it's installed
by: Andrew05/12/2024
The product is great. I replaced a 2001 Strong Arm with this 2024 Strong Arm on my Floe Vertical lift. Having the remote control built in is very nice.
by: John03/23/2024
Works great! The only thing that would make it better is to make the tensioner knob easier to grip when your hands are wet
by: Raymond 11/29/2023
I love the winch for the strap is a great upgrade than the power winch with metal cable which would rust, wire strands would break off, and cut your hands, and the cable would not retrieve back on winch even. The cons I see is the strap has become dried out after use on the end at the hook and it wants to double over on same area. Another concern I have is you have to tighten the clutch knob very hard when retrieving in or it will back off and free spin back out. Just have to wait and see if this becomes a problem in the future.
by: James07/17/2019
Works great, fit my trail weight boat trailer, with a 24 foot pontoon
by: Al K.06/15/2017
I am a 77 year old man and having to hand winch my small sailboat up on a shore ramp that I have. It was getting to be a bit much, so I decided to look into a 12volt winch. The Dl25200 fit the bill, works great. I have a 12volt battery next to it and a 10 , watt solar charger to keep the battery up, I hope. Time will tell. The service at etrailer was great, good price and fast shipping. Thanks
by: Rudy 03/29/2023
Easy to install, works great. Moves a 650 lb load with ease. Noah at customer service was very helpful and professional
by: Joe S06/19/2014
I purchased this winch to replace a Fulton K2550 manual winch on my ham radio tower. My tower is 54 ft tall when extended and 21 ft when retracted. It takes about 170 turns of the winch to raise/lower the tower. I removed the hand winch and placed the D-L SA9010AC winch in the existing mounting holes. I like this winch since it comes with a stainless hub since it will be used outside. This winch has a 2700 lb load rating. I am lifting around 700 lbs. This winch comes with no cable or freewheeling clutch. I reused the 1/4" stainless cable on the winch. I raised the tower and it took 2 minutes and 10 seconds. Lowering took 2 minutes. Well within the maximun run time of 3 minutes. The cable length winched was 17 ft. I have raised and lowered the tower several times to work on the antenna's and it worked properly every time. Attached are several pictures of the installation. I already recommended this winch to another ham operator.
by: James 02/24/2024
Perfect replacement for my old winch. Took only a few minutes to install.
by: Mark C05/14/2024
Absolutely a great product I have used before. The trailer is a great company to deal with.
by: Joseph D05/15/2024
Just what I needed
by: John 02/16/2024
works perfectly.....great product and r eputation!
by: Kimberly04/19/2024
Great experience.
by: Gary04/28/2020
To whom it may concern,
The power cable that came with the winch is 4' short. It was mounted on the front of a boat trailer and I have a full size pick up.
by: Eric 04/27/2023
Arrived in timely manner . Easy to install. Replaced hand crank on my boat trailer with this electric winch . Getting older and have some back issues . Works perfectly. Rather than connecting and wiring to car battery I use a portable battery in back of my car .
by: C. Michael04/07/2020
Installed this electric winch on an existing DavitMaster davit. Easy install utilizing existing manual winch plate and hardware. Salesperson was very knowledgable and helpful. Very satisfied with product.
by: Thomas K03/24/2018
Yes I finished the winch installation, I have not tried at the boat ramp,
however I ran the winch and am very pleased. I am also pleased at the way your company does business. Thank you. George you asked for pictures, please find enclosed pictures.
25
129
Show More Reviews
See what our Experts say about this Dutton-Lainson Electric Winch
- How Does the Dutton-Lainson StrongArm Electric Winch # DL24876 InstallThe Dutton-Lainson StrongArm Electric Winch # DL24876 that you referenced is equipped with keyhole slots in the base for use with quick mounting shoulder studs if desired. They would need to be mounted securely into the winch stand of where you plan on installing the winch. After positioning the winch on the studs, a 3/8 inch bolt should be placed in one of the other holes available to keep the winch secure in position. All of the mounting hardware needed will need to be supplied by you. I...
view full answer... - Replacement Dutton-Lainson 90-946 MotorYes, to replace the motor on your Dutton-Lainson powered winch you just need the part # DL304921. This the exact 90-946 100VDC 7.7 max amp motor you are needing.
view full answer... - Replacement 120 Volt Electric Wince For a Ham Radio TowerBased on your images I would recommend either the Dutton-Lainson StrongArm Electric Winch # DL24876 which is controlled on with a switch on the unit or we have the same winch with a 10' wired remote # DL25046.
view full answer... - Where is the Bulldog Winch # BDW15018 Manufactured?While we do have a U.S.A. made option, the Bulldog Winch # BDW15018 is made in China. For a great American alternative, the highest capacity U.S.A. made winch we have is the Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered # DL24876. This winch has a load capacity of 4,000 pounds when using a double line on the pully. Using a double line also improves overall control of pulling/lowering.
view full answer... - Dutton-Lainson Strong Arm Winch that Can Pull 1,000 Pounds for a JetSki LiftDutton Lainson AC powered winch # DL24876 is rated for 2,700 pounds but depending on how much of the cable is on the drum the capacity can change. Basically, if a winch has just one layer of wire rope across the drum then it is at full capacity. The second layer will cause a drop in capacity by 10 percent, so it will go from 2,700 pounds down to 2,430 pounds. Each layer of wire rope around the drum drops the capacity 10 percent. But even with the decrease in the capacity the winch can...
view full answer... - 2,700 lb Winch Availability that Can be Powered by Wall OutletWe have AC power winches that would work for what you are looking to do, but the part # 1120210 is designed for DC power like what would be found on a vehicle. For a similar setup that would work well we have the Dutton Lainson StrongArm Winch part # DL24876 which has a 2,700 lb capacity and comes with a pulley block.
view full answer... - Recommended Cost Effective AC Powered Electric Boat WinchI do have an AC powered winch for you but we currently do not have a DC to AC converter capable of handling the power draw of the Dutton-Lainson TW4000 StrongArm Electric Winch part # DL25200. For a similar AC powered winch, I recommend using the Dutton-Lainson StrongArm Electric Winch part # DL24876. This electric winch has a maximum load capacity of 2,700 lbs which is the highest capacity we offer for AC powered winches. The winch also comes with a pulley block that allows you to move...
view full answer... - Can Dutton-Lainson StrongArm Electric Winch DL24876 be Used with a JetSki LiftDutton-Lainson states: "Special care should be taken with 120-volt AC winches, as with any other 120-volt tools. It is recommended that whenever a 120-volt AC winch is out-of-doors that it be used with a ground fault circuit interrupter (GFI outlet)." It goes on to say not to use it in the rain or if it is wet. They also state that the winch is great for watercraft lifts. So provided the winch is not getting wet it will work great for your application. this is going to pretty much be...
view full answer... - Recommended Electric Winch w/ a 50 Foot Cable For an affordable winch with a 50' cable, I recommend the Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered item # DL24876. This winch has a 50' by 7/32" diameter wire cable. It has a 2,700 lbs capacity.
view full answer... - Recommended Electric Winch to Pull/Lower 300 lb Generator on a RampFor a wall mounted winch, I'm not clear if you mean a trailer wall or a garage wall, so I'll give you an AC option and a DC option for power. For an AC option, I recommend the Dutton-Lainson StrongArm Electric Winch w/ Pulley Block, AC Powered - 2,700 lbs # DL24876. This will have the strength to pull your 300 lb generator up even a steep ramp incline and has the ability to double your line and use the pulley block for smoother and controlled pull/lowering. For a DC option, I recommend...
view full answer... - Availability of Replacement Motor for Dutton-Lainson # DL24876 Strong Arm WinchAccording to the parts diagram for your Dutton Lainson # DL24876 Strong Arm winch, the # DL304921 motor is indeed the correct replacement.
view full answer...
Do you have a question about this Electric Winch?
Info for this part was:
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Isabelle B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.