Dutton-Lainson StrongArm Electric Winch w/ Remote and Pulley Block, AC Powered - 1,200 lbs
(126 reviews)
Price: $566.87
In Stock
Dutton-Lainson StrongArm Electric Winch w/ Remote and Pulley Block, AC Powered - 1,200 lbs
Item # DL25727
Our Price: $566.87
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (126)
- Q & A (0)
- Photos
Dutton-Lainson Electric Winch - DL25727
- AC Winch
- 1001 - 2000 lbs
- Wire Rope
- Plug-In Remote
- Dutton-Lainson
- Medium - 5 to 9 fpm
- 21 - 30 lbs
- Spur Gear
This winch includes a 50' cable that increases the load capacity with double-line-pulling capability. Winch works anywhere AC power is available and includes a Load/Unload remote and a spring-loaded clutch for releasing cargo without power.
Features:
- Built-in, hand-held remote with 10' cord
- Dual controls for Load/Unload and Run/Off functions
- Dynamic motor brake and mechanical friction brake
- Dynamic brake helps bring load to immediate halt without coasting
- Mechanical brake locks reel to hold load
- Spring-loaded clutch lever for releasing load without power
- Provides smooth load control from locked or freewheel position
- Automatically returns to locked position when released
- Freewheel option allows cable to be removed by hand
- Provides smooth load control from locked or freewheel position
- 120-Volt, AC operation
- 10', 3-Wire grounded power cord
- Flexible, high-strength, 7 strand x 19 gauge, galvanized aircraft cable
- Pulley block and snap hook included for double-line pulling
- 50' of Cable - great for double-line operation
- Safety snap hook keeps load securely attached
- Wire cable can be swapped out for 2" wide strap
- Emergency crank handle comes standard
- Use in the event of power failure
- Heat-treated gears provide smoother, quieter ride and greater strength
- Precision needle bearings in high-load areas
- Create low friction and promote longer life
- Die-formed base is adapted for quick-mounting applications
- High-impact, weather-resistant case
- Provides excellent protection for internal components
- Safer than open-reel models
- Brushed stainless steel front plate for superior rust resistance
- Made in the USA
Specs:
- Load capacity: 1,200 lbs
- Double-line capacity: 1,800 lbs
- Rating based on 10' pull
- Current draw: 6 amps at 120 volts
- Electric winches should be used intermittently - maximum continuous run time is 4 minutes
- Gear ratio: 189:1
- Cable dimensions: 3/16" diameter x 50' long
- Load speed (feet per minute):
- No Load/Full Reel - 17.5
- Full Load/Full Reel - 9.5
- 1-Year limited warranty
Determining Your Load Capacity
A common ratio for determining your winch load capacity is 2:1. For example, a 2,000-lb boat would require a 1,100-lb winch. There are extenuating factors, however, that will determine the appropriate winch size for your purposes.
The ratio can be stretched to 3:1 in instances when the trailer in use has high-quality rollers and is most commonly used on ramps where boats float most of the way onto the trailer.
In contrast, using a boat trailer that has wooden bunks, lacks self-alignment capabilities, and is most commonly used on ramps where the boat must be winched most of the way onto the trailer reduces the ratio to 1:1.
Note that pontoon trailers and other special designs require special consideration when determining winch capacity.
| Percent Incline | Multiply By |
|---|---|
| Level Surface | 10.0 |
| 5 (3 degrees) | 6.67 |
| 10 (6 degrees) | 5.02 |
| 20 (11 degrees) | 3.40 |
| 30 (17 degrees) | 2.61 |
| 50 (26 degrees) | 1.86 |
| 70 (35 degrees) | 1.53 |
| 100 (45 degrees) | 1.29 |
Determining Your Rolling Load Capacity
To calculate your winch's rolling load capacity - the amount of weight it can pull up an incline - you must multiply the winch capacity by a factor determined by the degree of the incline.
The multiplication factor shown includes a 10 percent rolling friction factor. Note: A 5 percent - or 3 degree - incline is a 1/2' rise in 10'. Follow the chart to determine your winch's rolling load capacity.
Mounting Your Winch
Note:
All Dutton-Lainson StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present.
25727 Dutton-Lainson StrongArm Electric Winch w/ Remote and Pulley Block, AC Powered - 1,200 lbs
Installation Details
Customer Reviews
Dutton-Lainson StrongArm Electric Winch w/ Remote and Pulley Block, AC Powered - 1,200 lbs - DL25727
Average Customer Rating: 4.7 out of 5 stars (126 Customer Reviews)
This winch includes a 50' cable that increases the load capacity with double-line-pulling capability. Winch works anywhere AC power is available and includes a Load/Unload remote and a spring-loaded clutch for releasing cargo without power.by: Todd08/16/2023
The hoist has stopped working after 5 months .
by: Kris 11/11/2022
Great advice in choosing the correct winch for my needs! The reps at etrailer are awesome! I ordered my winch and within the week I received it! Wow! Best on-line experience, in all aspects, so far!
by: Wayne03/21/2024
Shopped around a lot before I bought this. My boat is heavy (7500 lb) and the wench I had struggled. I took a chance on this as it was rated for the weight. I used the Anderson style connectors and installed a breaker near the battery. Pulled new wire rated for the amp draw. I couldnt be happier! This thing is a beast! Has no prob pulling my boat and cant see that it struggles at all. Highly reccomend. Photo is during installation. I put a cover over it due to my anchor comes close when launching and didnt want it to hit.
by: Darren02/03/2018
Put this winch on my Ranger 620 boat trailer a year ago and love it! Haven't had a single problem and it helps trailering when I fish alone. I ran power and ground from my truck battery to a back bumper plug, and have a separate removable cable (shown in pic) to connect truck plug to the winch plug. Grounding to the truck didn't work for me. I have another spare cable and plug rolled up and attached to my trolling motor battery for when my buddies drive. Winch prevents power loading and drawing sand into the motor. DL24055 adapter plate was needed and I put a coupler lock up through the middle of the winch to prevent theft and I bought a cover (shown in pic) to keep the rain out. etrailer sales and support are absolutely fabulous! They helped me figure all this out.
by: Richard 03/23/2024
Received the winch and all looks good. I ordered a new boat trailer so the winch hasn't been installed yet. Will let you know when it's installed
by: Raymond 11/29/2023
I love the winch for the strap is a great upgrade than the power winch with metal cable which would rust, wire strands would break off, and cut your hands, and the cable would not retrieve back on winch even. The cons I see is the strap has become dried out after use on the end at the hook and it wants to double over on same area. Another concern I have is you have to tighten the clutch knob very hard when retrieving in or it will back off and free spin back out. Just have to wait and see if this becomes a problem in the future.
by: John03/23/2024
Works great! The only thing that would make it better is to make the tensioner knob easier to grip when your hands are wet
by: Joe S06/19/2014
I purchased this winch to replace a Fulton K2550 manual winch on my ham radio tower. My tower is 54 ft tall when extended and 21 ft when retracted. It takes about 170 turns of the winch to raise/lower the tower. I removed the hand winch and placed the D-L SA9010AC winch in the existing mounting holes. I like this winch since it comes with a stainless hub since it will be used outside. This winch has a 2700 lb load rating. I am lifting around 700 lbs. This winch comes with no cable or freewheeling clutch. I reused the 1/4" stainless cable on the winch. I raised the tower and it took 2 minutes and 10 seconds. Lowering took 2 minutes. Well within the maximun run time of 3 minutes. The cable length winched was 17 ft. I have raised and lowered the tower several times to work on the antenna's and it worked properly every time. Attached are several pictures of the installation. I already recommended this winch to another ham operator.
by: Al K.06/15/2017
I am a 77 year old man and having to hand winch my small sailboat up on a shore ramp that I have. It was getting to be a bit much, so I decided to look into a 12volt winch. The Dl25200 fit the bill, works great. I have a 12volt battery next to it and a 10 , watt solar charger to keep the battery up, I hope. Time will tell. The service at etrailer was great, good price and fast shipping. Thanks
by: Rudy 03/29/2023
Easy to install, works great. Moves a 650 lb load with ease. Noah at customer service was very helpful and professional
by: James07/17/2019
Works great, fit my trail weight boat trailer, with a 24 foot pontoon
by: PontoonSarah04/12/2024
They were exceptionally helpful in deciding which winch to buy. I got this for my pontoon boat on a slide bumper trailer. I wanted to make sure it would have enough power to pull my 24 ft pontoon. This winch is honestly one of the best purchases I have made for this boat. It easily pulls my boat up onto the trailer. Total time to load about 2 mins. I have had many envious looks at my electric winch. Thank you again. For the help in deciding which one to get.
by: James 02/24/2024
Perfect replacement for my old winch. Took only a few minutes to install.
by: Eric 04/27/2023
Arrived in timely manner . Easy to install. Replaced hand crank on my boat trailer with this electric winch . Getting older and have some back issues . Works perfectly. Rather than connecting and wiring to car battery I use a portable battery in back of my car .
by: John 02/16/2024
works perfectly.....great product and r eputation!
by: Kimberly04/19/2024
Great experience.
by: Kevin 02/17/2023
The winch works as advertised. My boat with gear and fuel weighs in around 6500 lbs. My trailer has rollers so that does make it easier. It hauls it up ok until maybe the last 6 inches where it slows down a bit. One improvement I would make would be to have a better emergencey handle. It is quite small and if I ever had to use it I would imagine it would take forever and not sure I could generate enough leverage to pull the boat all the way onto the trailer.
by: Gary04/28/2020
To whom it may concern,
The power cable that came with the winch is 4' short. It was mounted on the front of a boat trailer and I have a full size pick up.
by: C. Michael04/07/2020
Installed this electric winch on an existing DavitMaster davit. Easy install utilizing existing manual winch plate and hardware. Salesperson was very knowledgable and helpful. Very satisfied with product.
by: Michael08/13/2022
They provided prompt service and gave me some valuable input about winch operation.
by: Thomas K03/24/2018
Yes I finished the winch installation, I have not tried at the boat ramp,
however I ran the winch and am very pleased. I am also pleased at the way your company does business. Thank you. George you asked for pictures, please find enclosed pictures.
by: Kenneth10/01/2022
The trailer winch is a huge help in allowing me to load my boat onto my trailer, especially this year (summer 2022) with water levels in most Minnesota lakes very low. The low water levels prevents the boat from floating up on the trailer in many cases - Muscle is required to pull the boat onto the trailer. This electric winch provides the muscle and saves my 65 year old body from the task.
I power the winch with a 12 volt jump starter and I've used it approximately 60 times thus far without problem. I keep the jump starter in the back of my SUV and then hook it up when I'm ready to load my boat on the trailer. This saves the trouble of wiring the car for the winch and it works perfectly.
Why 3 stars? Because the wiring at the connection from the remote cable to the winch was poorly done and failed within 1/2 year. I had to redo the 3 connections at the end of the remote cable and the 3 connections going into the winch. Very poor job by Dutton-Lainson connecting the wires to the connectors - Inexcusable for a $500 item.
I had a couple questions while installing the winch and etrailer was very helpful in answering those questions. This is why I buy from etrailer and not elsewhere. They both charge a similar price and the technical support that etrailer provides makes it a no brainer - I will always buy from etrailer.
by: Michael05/01/2018
I installed this winch as a replacement for the standard winch on my Magic Tilt trailer for my 21ft. SeaFox. I replaced the winch so that my wife would not have to hand crank when helping me load the boat. I only wish I'd done it sooner! It works like a charm, the install was simple and it has held up well. I keep the winch covered with a tarp to keep the rain off of it and I'm sure that has helped. The SeaFox weighs about 3000# plus the weight of the motor, fuel and whatever other junk we've got onboard. If you are looking for a good electric winch to make your life easier, I recommend this one.
by: Frank05/10/2022
This has been a great purchase. As I get older it is becoming more difficult to load my boa. This has made using my boat much easier.
25
126
Show More Reviews
See what our Experts say about this Dutton-Lainson Electric Winch
- Recommended Replacement Lifting Winch For 120-Volt Power Dutton-Lainson The Dutton-Lainson StrongArm Electric Winch # DL25727 is likely going to be your best solution. This winch is rated for 1,200lbs and includes a 10' cord to plug into a 120-volt outlet. It has as 10' wired remote allowing you to run the line in or out and switch the motor on and off. A dynamic brake will hold the line as moving in and out and a mechanical brake will lock the real when the motor is switched off.
view full answer...
- Hoist Recommendation To Lift Brass Bird CageThe Dutton-Lainson StrongArm Electric Winch, part # DL25727 would sure lift your cage. It is quite a lot bigger than what you need, but it would certainly work. It does have some great features, and when installed would make the job of lifting the cage much easier. Check out the attached video.
view full answer... - Availability Of a Lightweight 120 Volt Electric Winch The Dutton-Lainson StrongArm Electric Winch # DL25727 is our lightest capacity 120v winch with a 1,200lb capacity. This particular winch includes a plug in remote and pully block along with the ability to release the clutch to pull out a large quantity of cable quickly. If you are looking for one more basic the Winch # DL25514 has a simple in and out momentary switch to operate the winch.
view full answer... - Mounting Hardware For a Dutton-Lainson StrongArm Electric WinchWe do offer the Dutton-Lainson Quick Mount Kit # DL70309 as the Dutton-Lainson StrongArm Electric Winch # DL25727 does not include any mounting hardware. The quick mount kit allows you to easily remove the winch for storage or to use the same winch with different applications by having multiple mounting kits. We also have the Dutton-Lainson Mounting Adapter Plate # DL24055 if you would prefer to have the plate for mounting.
view full answer... - Winch to Lift a Slot Car Table Up VerticallyThe perfect winch for you is going to be a worm gear winch. They were made with these types of applications in mind. We have some that mount to the ceiling like # DL10954 so you would not have to necessarily use any pulley blocks to get a straight line pull. Worm gear winches brake automatically if you let go of the handle no matter which way you are turning it. The only issue you might run into is that worm gear winches require a lot of handle turns for 1 turn of the drum. But on some...
view full answer... - Suggestion for Lifting B&W Companion Fifth Wheel Hitch Into Truck BedI have a solution for you to easily place and remove the B & W Companion Fifth Wheel Hitch # BWRVK3500 from the bed of your pickup. The Buffalo Tools Electric Hoist # BTEHOISTUL will attach to a crossmember in your barn or garage to help lift the hitch in and out of the truck. The hoist winch includes mounting brackets to attach to the crossmember. A 4-point harness will be needed for the hitch in order to be secure while being lifted. When used as a single cable system, the winch has...
view full answer...
- Can Demco 5th Wheel Lifting Bracket # DM6100 Lift a 5th Wheel Hitch Head and Base or Just the HeadDemco 5th Wheel Lifting Bracket # DM6100 can lift the hitch and its base provided that both combined are under the 500 pound capacity of the bracket. We also have some devices that can do the heavy lifting such as hoist # DL25727. With the hoist you would be limited to 1200 pounds, so this should meet your needs.
view full answer... - Hoist Recommendation Without Gap In Travel To Lift Tires Into Rafters of GarageThe chrome pulley on the ProGrip Hunter's Hoist with Pulley and Rope Lock - 20' Long x 3/8" Diameter part # 317-404780 is fixed and does not move so the 14-1/2" between the pulley and the top hook cannot be shortened. There will be that 14-1/2" of distance that you cannot lift the tire with the hoist. You may consider a Dutton-Lainson StrongArm Electric Winch w/ Remote and Pulley Block, AC Powered - 1,200 lb # DL25727 which allow you lift the tires all the way up to the garage's cross...
view full answer... - Powered Ceiling Hoist Solution for Lifting 300 lb Camper ShellWe have a great powered hoist solution that has the capacity you'd need for your up to 300 lb camper shell with the Dutton-Lainson StrongArm Electric Winch w/ Remote and Pulley Block, AC Powered - 1,200 lbs Item # DL25727. The winch you referenced though is not rated for lifting anything off the ground and suspending it.
view full answer... - Is there a Maximum Ceiling Height for the Thule MultiLift Cargo Lift and Storage SystemI checked with Thule and the max length from the mounting surface to the ends of the ropes on Thule hoist # TH572 is 200cm which in inches is 78.8 inches or about 6-1/2 feet. So from the bottom of the item on the roof of the vehicle that you need to hoist up to the mounting surface for the hoist cannot be further than that 6-1/2 feet. Another possible option is to use a hoist such as # DL25727. Its cable is 50 feet long.
view full answer... - Recommended AC Powered Winch To Replace A Superwinch SAC1000The closest option we offer to the SAC1000 would be the Dutton-Lainson StrongArm Electric Winch # DL25727. This winch has a 1,200lb capacity and runs off of 110v service. It includes a wired remote to extend and retract the cable, which also includes a pulley.
view full answer... - Worm Gear Winch and Hoist Recommendations to Lift a 50 Pound KayakAt 1,500 pounds capacity worm gear winch # DL10954 is the lowest capacity available. Speed is an issue with worn gear winches because they allow for the precise movement of a load. If you used # DL11011 with a series of pulleys you could mount the winch lower and operate it with a power drill to speed things up significantly. Regarding pulling 2 lines in at the same time the preferred method would be to use pulleys and one line feeding in to the winch though you might find success using...
view full answer... - Recommended Electric Winch For A 1,000 Lb. JetskiI do have a few options for you to consider but we don't offer a winch that meets all of your preferences. The winch we have closest to your needs is the Bulldog Winch Powersports Series ATV Winch part # BDW15010. This winch features a synthetic rope, wireless capabilities, pull strength of 2,000 lbs, is weather resistant, and has a rope length of 40'. You will also need the Wireless Remote Kit for Bulldog Winch 3400 and 4400 Trailer Winches part # BDW20212 to operate the winch wirelessly....
view full answer... - Will B&W Companion Fifth Wheel Slider Hitch Fit in 1994 Chevrolet K2500 Short BedIn order for the B&W Companion 5th Wheel Slider # BWRVK3400-5W to fit your truck, you will first need to have the B&W Turnoverball Gooseneck Hitch # BWGNRK1050-5W installed. This fifth wheel hitch is only confirmed to work with B&W gooseneck hitch installation kits. This hitch gives you full access to your truck bed when you remove the hitch. It is heavy, so it's easier to take it out of the truck by removing the head first but even that leaves the base which is still approximately 200...
view full answer...
Do you have a question about this Electric Winch?
Info for this part was:
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Isabelle B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/20/2023
The winch does come with a one year warranty. I can send the warranty details if you are interested.