Dutton-Lainson StrongArm Electric Winch w/ Remote, AC Powered - 2,700 lbs
(129 reviews)
Price: $594.35
In Stock
Dutton-Lainson StrongArm Electric Winch w/ Remote, AC Powered - 2,700 lbs
Item # DL25019
Our Price: $594.35
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (129)
- Q & A (0)
- Videos (1)
- Photos
Dutton-Lainson Electric Winch - DL25019
- AC Winch
- 2001 - 4000 lbs
- Wire Rope
- Plug-In Remote
- Dutton-Lainson
- Medium - 5 to 9 fpm
- 21 - 30 lbs
- Spur Gear
Compact for use in tight spaces, this electric winch is perfect for indoor or fixed applications. Winch works anywhere AC power is available and includes a Load/Unload switch and a spring-loaded clutch for releasing cargo without using power.
Features:
- Built-in, hand-held remote with 10' cord
- Dual controls for Load/Unload and Run/Off functions
- Dynamic motor brake and mechanical friction brake
- Dynamic brake helps bring load to immediate halt without coasting
- Mechanical brake locks reel to hold load
- Spring-loaded clutch lever for releasing load without power
- Provides smooth load control from locked or freewheel position
- Automatically returns to locked position when released
- Freewheel option allows cable to be removed by hand
- Provides smooth load control from locked or freewheel position
- 120-Volt, AC operation
- 10', 3-Wire grounded power cord
- Flexible, high-strength, 7 strand x 19 gauge, galvanized aircraft cable
- Safety snap hook keeps load securely attached
- Wire cable can be swapped out for 2" wide strap
- Emergency crank handle comes standard
- Use in the event of power failure
- Heat-treated gears provide smoother, quieter ride and greater strength
- Precision needle bearings in high-load areas
- Create low friction and promote longer life
- Die-formed base is adapted for quick-mounting applications
- High-impact, weather-resistant case
- Provides excellent protection for internal components
- Safer than open-reel models
- Brushed stainless steel front plate for superior rust resistance
- Made in the USA
Specs:
- Load capacity: 2,700 lbs
- Rating based on 10' pull
- Current draw: 6 amps at 120 volts
- Electric winches should be used intermittently - maximum continuous run time is 4 minutes
- Gear ratio: 570:1
- Cable dimensions: 7/32" diameter x 25' long
- Load speed (feet per minute):
- No Load/Full Reel - 18
- Full Load/Full Reel - 7
- 1-Year limited warranty
Determining Your Load Capacity
A common ratio for determining your winch load capacity is 2:1. For example, a 2,000-lb boat would require a 1,100-lb winch. There are extenuating factors, however, that will determine the appropriate winch size for your purposes.
The ratio can be stretched to 3:1 in instances when the trailer in use has high-quality rollers and is most commonly used on ramps where boats float most of the way onto the trailer.
In contrast, using a boat trailer that has wooden bunks, lacks self-alignment capabilities, and is most commonly used on ramps where the boat must be winched most of the way onto the trailer reduces the ratio to 1:1.
Note that pontoon trailers and other special designs require special consideration when determining winch capacity.
| Percent Incline | Multiply By |
|---|---|
| Level Surface | 10.0 |
| 5 (3 degrees) | 6.67 |
| 10 (6 degrees) | 5.02 |
| 20 (11 degrees) | 3.40 |
| 30 (17 degrees) | 2.61 |
| 50 (26 degrees) | 1.86 |
| 70 (35 degrees) | 1.53 |
| 100 (45 degrees) | 1.29 |
Determining Your Rolling Load Capacity
To calculate your winch's rolling load capacity - the amount of weight it can pull up an incline - you must multiply the winch capacity by a factor determined by the degree of the incline.
The multiplication factor shown includes a 10 percent rolling friction factor. Note: A 5 percent - or 3 degree - incline is a 1/2' rise in 10'. Follow the chart to determine your winch's rolling load capacity.
Mounting Your Winch
Note: All Dutton-Lainson StrongArm electric winches are built for multipurpose hauling and pulling operations. They are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present.
25019 Dutton-Lainson StrongArm Electric Winch w/ Remote, AC Powered - 2,700 lbs (SA9015AC)
Installation Details
Video of Dutton-Lainson StrongArm Electric Winch w/ Remote, AC Powered - 2,700 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Dutton-Lainson Electric Winch - StrongArm Electric Winch With Remote - DL25019
Hi, everybody. Andy here with etrailer.com. Let's take a look at this Dutton-Lainson strong arm electric winch with remote. This 120 volt AC powered winch is compact for use and tight spaces, and it's going to be perfect for your indoor or fixed applications. And this has a load capacity of 2,700 pounds and that capacity is based on a 10 foot pole. Now, this is a 120 volt operation with a 10 foot long three-wire grounded power cord.
I'm gonna plug this in, plug it back into my extension cord here so I can give you a brief demonstration of this momentarily. And this features a built-in handheld remote with a 10 foot cord on it. So this is going to be a very handy remote to use. And this has our in and out function and then our off and run function. So what I would like to do is just give you a brief demonstration of this.
So I have this set on out, then I'm gonna go ahead and engage the run button. As you can see, that's going to allow this to payout. (machine whirring loudly) And then I'm just gonna let that hang there outside of my table and push that into the in function. Hit run. (machine whirring loudly) And that's gonna pull that right in.
That was getting caught there on the edge of my table there. So it's going to be very easy to use. This has a current draw of 7 amps at 120 volts. And just so you know, electric winches should be used intermittently. So the maximum continuous runtime with this winch is four minutes.
Now, this has a dynamic motor break and mechanical friction break and the dynamic break is going to help bring the load to an immediate halt without coasting. And the mechanical brake is going to lock the reel to hold the load. Now, this does feature a spring loaded clutch lever that's going to allow you to release the load without power, providing smooth load control from the engage position as I have it right now or the free wheel position. And then it's going to automatically return to the lock position when it's released. So it's spring loaded as you can see. So as soon as you bring it off the free wheel, it's going to then spring back to the engaged position. So when I move it over to free wheel, it's going to allow you to pull that line out. And then when you put it into the engage, then you're not going to be able to pull it out anymore. So again, very easy operation to use, very smooth operation. And this does have a flexible high strength seven strand 19 gauge galvanized aircraft cable with a snap hook. And this cable is 25 feet long and 7 and 30 seconds of an inch in diameter. And that safety snap hook is going to keep the load securely attached. And this wire cable can be swapped out for a two inch wide strap. This does include an emergency crank handle. This comes standard so that you can use this in the event of a power failure and you'll just remove this cap that hopefully you can see there. And then that's going to allow you to have access to the winch with this emergency handle so you can easily use that. The heat-treated gears are going to provide a smoother operation for you. And not only that, a quieter ride and greater strength. The precision needle bearings in high load areas create low friction and promote longer life. And this has a gear ratio of 570:1 and the load speed with no load and a full reel is 18 feet per minute. And with a full load and a full reel is seven feet per minute. This does feature a di-formed base and this is adapted for quick mounting applications. Now, the measurements of this base hole pattern with diagrams can be found on this product page if you are in need of those measurements. Now, this does feature a high impact weather resistant case. This is going to give you excellent protection for those internal components while at the same time being safer than open reel models. And this brushed stainless steel front plate is going to give you superior rust resistance. This is made here in the USA. And just some overall measurements that I took before our time together, looking at the overall length at the longest points of this winch, we are sitting right at about 11 inches long. And then the overall width at the widest point, including our lever here, we are sitting right at about nine inches wide. And then the overall height at the tallest point, remove that remote there out of the way real quick, at the tallest point, we're sitting at about eight inches tall. Now, all Dutton-Lainson strong arm electric winches are built for multi-purpose hauling and pulling operations. And they are not to be used as hoist for lifting, supporting or transporting people, or for handling loads over areas where people could be present. Instructions are included to walk you through the installation process and again go over the features of this winch. And that's going to wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Reviews
Dutton-Lainson StrongArm Electric Winch w/ Remote, AC Powered - 2,700 lbs - DL25019
Average Customer Rating: 4.7 out of 5 stars (129 Customer Reviews)
Compact for use in tight spaces, this electric winch is perfect for indoor or fixed applications. Winch works anywhere AC power is available and includes a Load/Unload switch and a spring-loaded clutch for releasing cargo without using power.by: James 02/24/2024
Perfect replacement for my old winch. Took only a few minutes to install.
by: Stephanie01/06/2018
Giving this 4 stars, as we have only used it once...waiting to see how it holds up. We need to winch a 21' jet boat onto and off a floating dock and this is replacing our hand winch. So much easier! We swapped out the wire cable for the nylon one that is compatible with this winch - better for marine use. We needed to drill one extra hole for our mounting, but install was relatively straight forward. This does stay mounted to our dock, exposed to the elements. We are covering the unit and wires with plastic to help prolong its life.
Customer service at etrailer was fantastic. They helped me choose the correct items for our needs and followed up with the order. I would use them again and recommend them to others.
by: Wayne03/21/2024
Shopped around a lot before I bought this. My boat is heavy (7500 lb) and the wench I had struggled. I took a chance on this as it was rated for the weight. I used the Anderson style connectors and installed a breaker near the battery. Pulled new wire rated for the amp draw. I couldnt be happier! This thing is a beast! Has no prob pulling my boat and cant see that it struggles at all. Highly reccomend. Photo is during installation. I put a cover over it due to my anchor comes close when launching and didnt want it to hit.
by: PontoonSarah04/12/2024
They were exceptionally helpful in deciding which winch to buy. I got this for my pontoon boat on a slide bumper trailer. I wanted to make sure it would have enough power to pull my 24 ft pontoon. This winch is honestly one of the best purchases I have made for this boat. It easily pulls my boat up onto the trailer. Total time to load about 2 mins. I have had many envious looks at my electric winch. Thank you again. For the help in deciding which one to get.
by: Richard 03/23/2024
Received the winch and all looks good. I ordered a new boat trailer so the winch hasn't been installed yet. Will let you know when it's installed
by: Andrew05/12/2024
The product is great. I replaced a 2001 Strong Arm with this 2024 Strong Arm on my Floe Vertical lift. Having the remote control built in is very nice.
by: Darren02/03/2018
Put this winch on my Ranger 620 boat trailer a year ago and love it! Haven't had a single problem and it helps trailering when I fish alone. I ran power and ground from my truck battery to a back bumper plug, and have a separate removable cable (shown in pic) to connect truck plug to the winch plug. Grounding to the truck didn't work for me. I have another spare cable and plug rolled up and attached to my trolling motor battery for when my buddies drive. Winch prevents power loading and drawing sand into the motor. DL24055 adapter plate was needed and I put a coupler lock up through the middle of the winch to prevent theft and I bought a cover (shown in pic) to keep the rain out. etrailer sales and support are absolutely fabulous! They helped me figure all this out.
by: John03/23/2024
Works great! The only thing that would make it better is to make the tensioner knob easier to grip when your hands are wet
by: Raymond 11/29/2023
I love the winch for the strap is a great upgrade than the power winch with metal cable which would rust, wire strands would break off, and cut your hands, and the cable would not retrieve back on winch even. The cons I see is the strap has become dried out after use on the end at the hook and it wants to double over on same area. Another concern I have is you have to tighten the clutch knob very hard when retrieving in or it will back off and free spin back out. Just have to wait and see if this becomes a problem in the future.
by: James07/17/2019
Works great, fit my trail weight boat trailer, with a 24 foot pontoon
by: Rudy 03/29/2023
Easy to install, works great. Moves a 650 lb load with ease. Noah at customer service was very helpful and professional
by: Al K.06/15/2017
I am a 77 year old man and having to hand winch my small sailboat up on a shore ramp that I have. It was getting to be a bit much, so I decided to look into a 12volt winch. The Dl25200 fit the bill, works great. I have a 12volt battery next to it and a 10 , watt solar charger to keep the battery up, I hope. Time will tell. The service at etrailer was great, good price and fast shipping. Thanks
by: Joe S06/19/2014
I purchased this winch to replace a Fulton K2550 manual winch on my ham radio tower. My tower is 54 ft tall when extended and 21 ft when retracted. It takes about 170 turns of the winch to raise/lower the tower. I removed the hand winch and placed the D-L SA9010AC winch in the existing mounting holes. I like this winch since it comes with a stainless hub since it will be used outside. This winch has a 2700 lb load rating. I am lifting around 700 lbs. This winch comes with no cable or freewheeling clutch. I reused the 1/4" stainless cable on the winch. I raised the tower and it took 2 minutes and 10 seconds. Lowering took 2 minutes. Well within the maximun run time of 3 minutes. The cable length winched was 17 ft. I have raised and lowered the tower several times to work on the antenna's and it worked properly every time. Attached are several pictures of the installation. I already recommended this winch to another ham operator.
by: John 02/16/2024
works perfectly.....great product and r eputation!
by: Kimberly04/19/2024
Great experience.
by: Gary04/28/2020
To whom it may concern,
The power cable that came with the winch is 4' short. It was mounted on the front of a boat trailer and I have a full size pick up.
by: Eric 04/27/2023
Arrived in timely manner . Easy to install. Replaced hand crank on my boat trailer with this electric winch . Getting older and have some back issues . Works perfectly. Rather than connecting and wiring to car battery I use a portable battery in back of my car .
by: C. Michael04/07/2020
Installed this electric winch on an existing DavitMaster davit. Easy install utilizing existing manual winch plate and hardware. Salesperson was very knowledgable and helpful. Very satisfied with product.
by: Kevin 02/17/2023
The winch works as advertised. My boat with gear and fuel weighs in around 6500 lbs. My trailer has rollers so that does make it easier. It hauls it up ok until maybe the last 6 inches where it slows down a bit. One improvement I would make would be to have a better emergencey handle. It is quite small and if I ever had to use it I would imagine it would take forever and not sure I could generate enough leverage to pull the boat all the way onto the trailer.
by: Thomas K03/24/2018
Yes I finished the winch installation, I have not tried at the boat ramp,
however I ran the winch and am very pleased. I am also pleased at the way your company does business. Thank you. George you asked for pictures, please find enclosed pictures.
by: Michael08/13/2022
They provided prompt service and gave me some valuable input about winch operation.
by: Todd08/16/2023
The hoist has stopped working after 5 months .
by: Kenneth10/01/2022
The trailer winch is a huge help in allowing me to load my boat onto my trailer, especially this year (summer 2022) with water levels in most Minnesota lakes very low. The low water levels prevents the boat from floating up on the trailer in many cases - Muscle is required to pull the boat onto the trailer. This electric winch provides the muscle and saves my 65 year old body from the task.
I power the winch with a 12 volt jump starter and I've used it approximately 60 times thus far without problem. I keep the jump starter in the back of my SUV and then hook it up when I'm ready to load my boat on the trailer. This saves the trouble of wiring the car for the winch and it works perfectly.
Why 3 stars? Because the wiring at the connection from the remote cable to the winch was poorly done and failed within 1/2 year. I had to redo the 3 connections at the end of the remote cable and the 3 connections going into the winch. Very poor job by Dutton-Lainson connecting the wires to the connectors - Inexcusable for a $500 item.
I had a couple questions while installing the winch and etrailer was very helpful in answering those questions. This is why I buy from etrailer and not elsewhere. They both charge a similar price and the technical support that etrailer provides makes it a no brainer - I will always buy from etrailer.
by: Michael05/01/2018
I installed this winch as a replacement for the standard winch on my Magic Tilt trailer for my 21ft. SeaFox. I replaced the winch so that my wife would not have to hand crank when helping me load the boat. I only wish I'd done it sooner! It works like a charm, the install was simple and it has held up well. I keep the winch covered with a tarp to keep the rain off of it and I'm sure that has helped. The SeaFox weighs about 3000# plus the weight of the motor, fuel and whatever other junk we've got onboard. If you are looking for a good electric winch to make your life easier, I recommend this one.
25
129
Show More Reviews
See what our Experts say about this Dutton-Lainson Electric Winch
- How Does the Dutton-Lainson StrongArm Electric Winch Mount to a Trailer?The Dutton-Lainson StrongArm Electric Winch w/ Remote # DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that you'll use when mounting. To mount this winch you can use the Dutton-Lainson Quick Mount Kit # DL70309 or the Dutton-Lainson Mounting Adapter Plate for StrongArm Electric Winches # DL24055. You can also use 3/8" Grade 2 or Grade 5 screws into your...
view full answer...
- Is There a Dutton-Lainson StrongArm Electric Winch With Wireless RemoteWe do have options for winches that have a wireless remote, but each of the Dutton-Lainson StrongArm winches, such as the Dutton-Lainson StrongArm Electric Winch with Remote, AC Powered - 2,700 lbs # DL25019 come with remotes that are wired in. I recommend checking out the ComeUp UW-5000si Trailer Winch - Wireless Remote # CU645010. This is the lightest-duty winch with a wireless remote that works from up to 90 feet away and has a 5,000 lb static load pull rating. I have added a link...
view full answer... - Slow-Speed Electric Winch for Dogs Stair LiftI love what you are doing but I'm not sure we have quite what you are looking for - the the only AC winches we have run on AC run on 120 volts and they are not variable speeds, though there are some slow speed winches available which I'd be happy to tell you about if you are interested.
view full answer... - AC-Powered Winch for Indoor UseThe Bulldog Winch Trailer Winch # BDW15018 is made for use with a DC power source such as a 12-volt battery on a trailer but we do have AC-powered winches that are displayed on the linked page. These are available in various weight capacities. For instance we have the Dutton-Lainson StrongArm Electric Winch # DL25019, rated for 2700-lbs, that includes a 25-foot cable with hook. This winch also features a wired remote control, which may make it ideal for your application. A great resource...
view full answer... - Troubleshooting StrongArm SA9015AC Winch Blowing 20A Circuit Breaker When Running ForwardIf your Dutton-Lainson StrongArm Electric Winch # DL25019 is blowing the fuse when you are pulling the line in there are a few things to check. First of all look at the motor wire and check for any places where the insulation is damaged, especially where they make contact with the winch frame. The next thing that we would normally check is the motor but since it sounds like you have it working one way then I believe you either have it overloaded or you need to replace one of the switches. Inspect...
view full answer...
Do you have a question about this Electric Winch?
Info for this part was:
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Isabelle B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.