Pull Pin, Easy Swivel Trailer Jack with Foot - Topwind - 15" Travel - 2,000 lbs.

I bought a used generator trailer with 3 seized stabilizer jacks. etrailer had the dimensions on their jacks so I could find replacements, and by far the best price. The jacks came today. They are well made and a perfect fit. I'm going to grease the heck out of them so they don't seize like the last ones. They don't have zerks so I'll use motorcycle chain lube. Penetrates and protects.1268019

1435297

by: Michael 03/30/2024

This double wheel jack was the only one i could find that would replace the jack on my Ranger Bass Boat, The Ranger has a welded swivel mount and with somecareful thought it is a relacement for that jack using thr welded portion of the original.1756684

FYI: Received the jack and mounted it using the existing hardware. When I went to lock the jack  I discovered that the locking pin on the 1500 dual wheel jack is 1/2 inch and the pin from the old 1000 winch is much smaller. Now I have to disassemble and make the holes bigger to accept the pin. It would have been helpful if that was pointed out. Hoping the holes line up.

                                              Joseph Bara1682461

The overall build appears hefty.Tilt works well and stays at 90 degrees when supporting 3 snowmobiles on my dual axle trailer. My 13 year old granddaughter can one hand the crank when raising the trailer with the Jack.Not sure how well the double wheels will work when pushing the trailer in the garage to store but so far no problems.One upgrade they could do is us a better quality handle on the crank.This Jack came assembled!!Handle and wheels on.Quick install!!!1508329

Click to Enlarge

I ordered this to replace the jack on my 16 year old trailer. I did not use the weld on bracket because it was an exact fit. The jack is very easy to raise and lower. I like how the handle folds closed and has a friction lock to hold in folded position. The BEST Part is MADE IN USA.927775

Click to Enlarge

Click to Enlarge

by: Richard07/04/2023

The jack works well, mounted to my trailer without issues. But on the second trip with the trailer, the cap on top fell off. I have had a difficult time finding a replacement cap and have defaulted to duct tape.1614703

Purchased to replace the broken jack on a 1997 Coleman Destiny Taos pop-up I am rebuilding. I chose to use this bolt on on the opposite side of the original welded jack so I can convert the old jack into a swinging standing foot, or replace it later with an auxiliary weld o jack. Extremely easy installation for this jack. The method of attachment allows me to move the jack forward or backward on the tongue as I see fit. Crank is smooth and easy. Spring-loaded pullout bolt allows for very easy swivel. The original jack had a single wheel and was for a tongue weight of #500, while this new jack has a double wheel and allows for a tongue weight of #1500. As a result, moving the trailer by hand is like pushing butter. As always, the folks at etrailer did a great job of providing information, photos, and videos, to allow me to make the proper choice of item, and they did a great job in contacting me and shipping this to me.1403862

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I ordered a dual wheel 1,500 jack and received a single wheel 1,000# jack. When I notified etrailer, they made me feel like it was my fault, they didn't have mine in stock....went to Northern Tool and purchased what I needed. Still have not received my refund :-(1615387

The jack broke on our bear pontoon trailer. Tried looking number up on broken jack and couldn't find anything number wise to match. Called e trailer and asked them if they could cross reference the number somehow. And found a match that was verified by the manufacturer. Thanks for making it easy.1666147

by: Greg 02/13/2024

An outstanding piece of quality equipment. The wheel swivels smoothly under all conditions. 10x better than the cheaper alternatives.1731285

Super fast delivery. Excellent service would highly recommend ordering anything from this site1770631

My new Dutton-Lainson Tongue Jack from erailer has eliminated the potential problem of receiving an unwanted tailgate ding. This unit is heavy duty with a 1,000 pound tongue rating - not some $35 throw-away unit that you usually get from Big Box stores.
Installation on my new Karavan Utility Trailer was easy enough, taking no more than 30 minutes, and that's without even reading the installation instructions!
The D-L tongue jack provides trailer tongue quick drop, as well as high quality worm gear internals.
Thanks etrailer! Satisfied Customer636370

Click to Enlarge

Click to Enlarge

Fast shipping 1777181

Fits as needed
My old single wheel jack was not enough
I have a sand car in the trailer it needed to be well made. It is. Time will be the true test. 769976

Click to Enlarge

2nd jack, handle breaks within 2 months, don't waste your time. Go Fulton.1613841

Sturdy and well-made, easy to bolt on, made in the USA.1656922

Perfect size. Moved the trailer yesterday using the trailer jack, so much easier.1043444

Click to Enlarge

First of all, despite the typical delays we're all experiencing these days the people at Etrailer sent updates. Communication is a good thing! I installed the jack on my Shorelander trailer and had to drill out the holes for the lock pin to accomodate the larger diameter pin as I had to use the factory mount on the trailer. Other than that, it mounted nicely and sure makes it easy to move the boat around. Well built jack, no more creaking and flexing!1085556

awesome service, speedy delivery!!
Thank you!1696040

This trailer jack is amazing. The turn handle mechanism works so well, very smooth. We really like the ability to turn it sideways so it stores horizontally when in transit. The wheel turns very easily, making positioning painless. We both love that it was made in the USA. Ordering was easy, and shipping was lightning fast. Will be back if we need any more accessories for our trailer. 845582

Great product. Stronger and better made than the jack that came with my Mew trailer.1569791

I purchased this item to replace an original trailer jack that was a little too "lightweight" for the trailer/boat. Based on the hardware included with this jack, I was pleased to learn this jack can be installed on virtually any trailer. I was not able to use the original trailer mount from the original jack, but WAS able to mount this one directly behind the original welded mount. This jack makes any raising/lowering and moving the boat/trailer much easier than the original AND much safer.143463

Great service and kept me up to date on the status of my owder1666802

etrailer is an excellent source for trailer parts. Great selection, easy straight forward ordering and fantastic delivery. The jack was an easy 5-minute installation and appears to be more robust than the factory installed jack. Operation is smooth and sturdy. The double wheel configuration makes moving the trailer easier and more stable than the single wheel configuration that came on the trailer originally. 108015