Linchpin - 1-3/4" Long x 1/4" Diameter
(19 reviews)
Price: $3.27
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (19)
- Q & A (0)
- Videos (2)
- Photos
Redline Hitch Pins and Clips - LP14
- Linchpin
- 1/4 Inch Diameter
- 1-3/4 Inch Long
- 1-3/4 Inch Span
- Redline
Manufactured from low carbon steel, the pin portion of this linchpin has a Rockwell hardness Ra 50-60 with a 60-kg load. The ring portion is hot drawn spring steel. Zinc plated to resist corrosion.
Features:
- Corrosion-resistant zinc plating
Specs:
- 1/4" diameter pin
- 1-3/4" usable length
LP14, Linchpin 1/4" Diameter x 1-3/4 Usable Length Zinc
Video of Linchpin - 1-3/4" Long x 1/4" Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Linchpin Review
What's up, everybody It's AJ with etrailer.com. Today, we're gonna be checking out this linchpin from Redline. A good reason to replace one of your older linchpins is if it's worn out or dented. You can see the ring here isn't circular like it used to be and it doesn't have (linchpin clanking) that same snap so it's gonna stay in place, and that's not good 'cause you're gonna use one of these to hold arms in place. (linchpin clanking) So, on this flatbed trailer, this is where we want to put our linchpin. It's gonna go right here, (ring snapping) snap into place.
Now that arm, (arm clanking) not gonna go anywhere when you're going down the road. The linchpin's gonna be made out of a low carbon steel and has a zinc coating so when you leave it on the side of your trailer, you don't have to worry about the elements getting to it. The linchpin is gonna have a diameter of 1/4 of an inch. It's gonna have a usable pin length of 1 3/4. Overall, it's a good idea to replace any worn out linchpins on your trailer just so it keeps everything (arm clanking) where it's supposed to stay.
Well, I think that does it. Thanks for hanging out and hope this helps.
Customer Reviews
Linchpin - 1-3/4" Long x 1/4" Diameter - LP14
Average Customer Rating: 4.8 out of 5 stars (19 Customer Reviews)
Manufactured from low carbon steel, the pin portion of this linchpin has a Rockwell hardness Ra 50-60 with a 60-kg load. The ring portion is hot drawn spring steel. Zinc plated to resist corrosion.by: David07/27/2018
Perfect replacement for my Blue Ox hitch and tow guard pins (they are different sizes). I keep spares on hand because these things have a habit of getting lost. I am a repeat customer because of the excellent customer service and fast shipping.
by: Brad L.08/04/2015
This is a superb product that I used to secure the equalizer spring mechanisms on my travel trailer hitch. High quality parts work perfectly. In addition, etrailer.com is SUPER FAST and super efficient--a great supplier to buy from!
by: Alan12/31/2017
Have not had any issue with the clip. Been using it on my tow bar for flat towing the Jeep. Spring is still strong and no rust.
by: Edward05/06/2016
Wonderful service - great products- would definitely order from them again.
by: Claudio05/21/2018
Exactly what I was looking for, good company and you can trust, thank you.
by: Thomas12/30/2017
Works as expected
by: graham02/25/2013
Good price, fast shipping. Just what I wanted
by: Bob G10/18/2013
Better quality than the ones you can get at Lowes or Home Depot
by: Scott07/16/2020
Everything came on time and was exactly what I expected.
by: drew d10/22/2017
Perfect
by: Garry 09/13/2021
Great items
by: Scott02/19/2018
It works. What can I say.
by: Fred11/09/2017
Great Selection! Received in no time at all and value pricing. Thanks!!!!
by: w.k.08/12/2013
Super fast shipping and good communication too
by: Tom08/12/2016
Well made
by: Jake 07/29/2021
by: Karen 11/02/2021
by: John H.03/30/2012
good part
by: Robert 02/28/2021
19
19
See what our Experts say about this Redline Hitch Pins and Clips
- Option For Replacement Pins For TorkLift GlowStep TLA7836 Hey Glenn, we do have a potential option for a replacement pin. The pins that come with the TorkLift GlowStep # TLA7836 are not available individually, so I am afraid we cannot offer a direct replacement. What we do have is the Pin Lock for TorkLift GlowStep Scissor Steps # TLA7509, which can be used to replace the pins that hold the step to the bracket (see picture below). The # LP14 that you were looking at appears to be the right size pin. The problem is there is no clip on the other...
view full answer...
Info for this part was:
Installed by:
Andrew K
Installed by:
Andy C
Video Edited:
Joshua S
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.