Mounting Bracket Kit for Derale Fluid Control Thermostats

See what our Experts say about this Derale Accessories and Parts

• Recommended Transmission Cooler for a 2013 Chevy Tahoe
  I have the perfect transmission cooler option for you. Generally speaking, the best transmission cooler to use would be the largest one you have available space for. The best place to install a transmission cooler is in front of the radiator/condenser behind the grill on your 2013 Chevy Tahoe. I recommend using the Derale 25-Row, High-Performance, Stacked-Plate Cooler part # D52508 because the plate and fin technology incorporated into this transmission cooler is far more efficient than...
  view full answer...
  
• Do Derale Transmission Coolers have Thermostats
  The transmission cooler # D13504 by itself will allow fluid to flow through it all the time, it does not have a thermostat to allow fluid to only flow through it at certain temperatures. What you can do is add the Fluid Control Thermostat Kit, # D13011. This will only allow fluid to flow to the cooler once the fluid temperature reaches 180 degrees. You will also need mounting bracket # D25793.
  view full answer...
• Transmission and Engine Oil Thermostats for a 2013 Ford Explorer XLT Adding Tow Package
  I can help you protect your Explorer XLT, even in the cold climates of Wisconsin. The Derale # D15902 you were looking at is a great choice for your 2013 Ford Explorer XLT. This kit already includes an engine thermostat adapter, so all you will need is the transmission thermostat to complete your setup. The Derale # D15719 is the transmission thermostat kit with fluid control you are looking for. Since you will have to cut the return line as well as the input line, you will need the...
  view full answer...
• Fittings and Other Parts Needed to Install Transmission Cooler D52508 in a 2010 Chevy Tahoe
  Derale Snap-In Radiator Adapter Fitting # D13035 is recommended when installing a transmission cooler on the 2010 Chevy Tahoe. I have linked a video featuring this fitting for you. In addition to the fitting and the core, # D52508, you will also need a bracket kit # D50020 to mount the cooler, hose clamps, # D13008, and about 10 feet of hose, # D15700. We also have a 25 foot length of hose, # D15799, if you want to err on the side of caution; especially if you are also installing a bypass...
  view full answer...
• Transmission Cooler and Thermostat for a 2011 Subaru Forester
  Transmission fluid cannot be overcooled. But in the winter when the weather is cold you would either need to let your 2011 Subaru Forester warm up a little longer or you can install a thermostat with the cooler so that it will only send fluid through the cooler once the temperature is high enough. You can use Derale Fluid Control Thermostat Kit w/ 3/8" NPT Ports Item # D13011 with mounting bracket kit # D25793. The fluid will bypass a cooler, such as # D12906, if the fluid temperature...
  view full answer...
• Can Transmission Fluid Be Cooled Too Much on a 2005 Dodge Durango
  First, transmission fluid cannot be over cooled so you would not have to worry about that. In the winter time, it would just take longer to warm up. Or you could use a special thermostat adapter, # D15719. This will only allow 10 percent of the fluid to get through until the temperature reaches 180 degrees. You would also need mounting brackets # D25793. For a supplemental cooler, go with the largest one that will fit in the space you have. The most popular cooler for a 2005 Dodge Durango...
  view full answer...
• Installing Fluid Control Thermostat Kit With Derale 8000 Transmission Cooler For Cold Climates
  Yes you are exactly right, in very cold climates it is possible to damage your transmission if the fluid is not reaching the correct temperature. I recommend adding the Derale Fluid Control Thermostat Kit w/ 3/8" NPT Ports # D13011 in between the transmission and the aftermarket Derale 8000 Cooler # D13503. This will then allow the transmission fluid to heat up faster since this thermostat will restrict oil flow or allow oil flow depending on the temperature. You will also want to grab...
  view full answer...
• Micron Rating of Derale Filter 13092 and Fluid Control Thermostat Kit for Transmission Cooler
  I spoke with my contact at Derale and on the Replacement Filter # D13092 it has a micron rating of 21. He stated that you do not want to go more fine than that because it can strip out the abrasives in the transmission fluid that are needed for proper operation of the transmission. We carry different Derale thermostat kits that basically work the same way the thermostat does in a vehicle. There is no need for this for a supplemental transmission cooler unless you live in a cool climate...
  view full answer...
• Dual Oil Filter Mount and Relocation Kit for a 2005 Ford F-150
  The Engine Oil Filter Relocation Kit, # D15749, that you have referenced should fit your 2005 Ford F-150. The specs for the engine threads and o-ring diameters are listed on the product page and this kit covers all of the most popular sizes. The filter that will fit will have to have 3/4-16 threads. You can use Fram PH8A or equivalent filters. This is a flow-through device. This means the oil pump pushes the fluid through it and will only pump oil through it if the truck is running. You...
  view full answer...
• Thermostat Bypass for Use with a Derale Transmission Cooler
  I recommend Derale thermostat # D13011 with mounting bracket # D25793, and extra hose # D15799 when installing the Derale transmission cooler # D13503. The thermostat comes with the threaded ports and hose clamps so you will not need those separately. The thermostat will allow 90 percent of the fluid to bypass the supplemental cooler until the fluid temperature reaches 180 degrees. So if you live in a cold climate and don't want to wait as long for the vehicle to warm up this thermostat...
  view full answer...
• Recommended 2011 Honda Odyssey Transmission Cooler And Thermostat
  For your 2011 Honda Odyssey, the transmission cooler I recommend is the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503. This is a plate-fin cooler with furnace-brazed aluminum construction and 3/4 inch wide turbulator plates for more efficient cooling. I recommend Derale thermostat # D13011 with mounting bracket # D25793, and extra hose # D13016 for this installation. The thermostat will allow 90 percent of the fluid to bypass the...
  view full answer...
• Installation of Transmission Cooler and Thermostat on 2013 Toyota Sienna XLE 3.5L V6
  Derale Fluid Control Thermostat Kit w/ 3/8" NPT Ports # D13011 and the Transmission cooler # D13503 will work well on your 2013 Sienna. The thermostat is your fail safe, so I recommend putting it between your transmission and the secondary cooler. The thermostat will allow full oil flow whether the valve is open or closed so your transmission will get what it needs at all times and there won't be any pressurizing of hoses. The Mounting Bracket Kit for Derale Fluid Control Thermostats...
  view full answer...
  
• Recommended Fan-Powered Transmission Cooler For 2003 Toyota Sequoia
  The transmission cooler kit I recommend for your 2003 Sequoia is the Derale Hyper-Cool Remote Cooler kit, part # D15960. This kit includes the hardware to connect the cooler and the mounting hardware. This cooler is a stacked-plate cooler with a 500-CFM fan to make sure your transmission fluid stays as cool as possible. The great thing is this is a remote mount kit that can be mounted anywhere you have room under the hood. The cooler measures 13-inches wide x 10-inches tall x 5-5/8-inches...
  view full answer...

Do you have a question about this Accessories and Part?