Recommended 2011 Honda Odyssey Transmission Cooler And Thermostat
Question:
I am setting up my 2011 Honda Odyssey to pull a pop-up camper. I will be installing a hitch and the wiring. What transmission cooler do you recommend? Thank you!
asked by: David
Expert Reply:
For your 2011 Honda Odyssey, the transmission cooler I recommend is the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13503. This is a plate-fin cooler with furnace-brazed aluminum construction and 3/4 inch wide turbulator plates for more efficient cooling. I recommend Derale thermostat # D13011 with mounting bracket # D25793, and extra hose # D13016 for this installation. The thermostat will allow 90 percent of the fluid to bypass the supplemental cooler until the fluid temperature reaches 180 degrees. So if you live in a cold climate and don't want to wait as long for the vehicle to warm up this thermostat is the way to go.
If you don't already have the hitch and wiring, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75270. This is a bolt-on installation and has an e-coat base with a powder coat finish for rust protection and prevention.
For your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118521 which plugs into your Honda Odyssey's wiring harness located behind the driver's-side interior trim panel in your rear cargo area. Once you've plugged in the T-connector, open your fuse box and locate the fuse positions indicated in the instructions. Then insert the included fuses.
For a ball mount, I recommend the etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900. This will give you two ball mounts, one with a 3/4 inch rise or 2 inch drop and another with a 2-3/4 inch rise or 4 inch drop. You also get a 1-7/8 inch hitch ball and a 2 inch ball along with the pin and clip and carrying/storage bag. I've attached an article to assist with your choice.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Derale Fluid Control Thermostat Kit w/ 3/8" NPT Ports
- Accessories and Parts
- Engine Oil Coolers
- Thermostat
- 3/8 Inch NPT Ports
- Derale
more information >
Derale High-Temperature Replacement Hose for Transmission - 3/8" Inner Diameter - 5' Long
- Accessories and Parts
- Transmission Coolers
- Hoses
- 3/8 Inch Inner Diameter
- 5 Feet Long
- Derale
more information >
Mounting Bracket Kit for Derale Fluid Control Thermostats
- Accessories and Parts
- Transmission Coolers
- Mounting Hardware
- Brackets
- Derale
more information >
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Transmission Cooler
- Video: Transmission Cooler Installation - 2011 Honda Odyssey D12906
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Trailer Wiring Harness Installation - 2011 Honda Odyssey
- Video: Trailer Hitch Installation - 2011 Honda Odyssey
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: My Trailer Hitch Doesn't Fit
- Video: etrailer Hitch Pin Alignment Collar Review
- Search Results: trailer hitch wiring
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: etbc7
- Shop: Suspension Enhancement
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller